DimasTech BenchTables V2.5 [Archive] - Overclockaholics Forums

View Full Version : DimasTech BenchTables V2.5

Dimas

02-10-2010, 10:26 AM

Hello Guys, i'm Andrea, alias Dimas on forums, i was mostly a phase change builded in the past, but i decide to make also benchtables time ago, i did some experiments, some research, and what i'm about to show it's the last project we finish...
we have also some other good product related to overclockers incoming, like watercooling parts and new Phase Change coolers, but here we will show our New Test Station, i'd like to thank Kal for inviting me here, for sharing the develop, the process and if possible for you guys to suggest new ideas, are always welcome...

let's go on...
Here Below the Final Revision of Table Easy V2.5, this is the Standard Version, no customization, all the accessory like USB cable, FlexFan or other things are adding parts;)

Bench Table Easy V2.5 Specifications
-Single Model available, this model will cover all the old V2 versions
-Tipical U bend shape, 90 degrees round corner
-down tray now have a sledge and the fasteners are thumbscrews
-positioning of the support for optical and Hd on Slot, not just on holes
-lateral customization with the name of the product "DimasTech V2.5"
-Compatibility with all the radiators on market(hwlabs, thermochill, tfc, ecc...ecc...)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-4 hard disk support, 3,5"
-3 optical drive , 5,25"
-new slot for cable passing
-custom cut on the back saying "MADE IN ITALY"
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Hard V2.5
-4 back holes for water cooling tube passing or for waterccoling fittings
-new Power On and Reset Button "P" and "R" with red and black shrink cables
-USB front Port for Single Pen Drive, very usefull for saving screenshots and no boring about find the Rear USB ports (USB Cable is an Accessory)
-Male - Female spacers, no more need of screw for the motherboard Spacers
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5 (more news on this accessories in next week)
-XL-ATX vga support available as accessory (10 slots)

http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0274.jpg (http://forum.nexthardware.com/gallery/index.php?n=13331) http://forum.nexthardware.com/gallery/images/1426/medium/3_DSC_0092.jpg (http://forum.nexthardware.com/gallery/index.php?n=13339) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0095.jpg (http://forum.nexthardware.com/gallery/index.php?n=13340) http://forum.nexthardware.com/gallery/images/1426/medium/4_DSC_0096.jpg (http://forum.nexthardware.com/gallery/index.php?n=13341) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0098.jpg (http://forum.nexthardware.com/gallery/index.php?n=13342) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0099.jpg (http://forum.nexthardware.com/gallery/index.php?n=13343) http://forum.nexthardware.com/gallery/images/1426/medium/3_DSC_0101.jpg (http://forum.nexthardware.com/gallery/index.php?n=13344) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0105.jpg (http://forum.nexthardware.com/gallery/index.php?n=13345) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0107.jpg (http://forum.nexthardware.com/gallery/index.php?n=13346) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0110.jpg (http://forum.nexthardware.com/gallery/index.php?n=13347) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0111.jpg (http://forum.nexthardware.com/gallery/index.php?n=13348) http://forum.nexthardware.com/gallery/images/1426/medium/3_DSC_0113.jpg (http://forum.nexthardware.com/gallery/index.php?n=13349)

Hardware Assembled Air Cooling, Only USB CABLE accessory

http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0069.jpg (http://forum.nexthardware.com/gallery/index.php?n=13350) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0074.jpg (http://forum.nexthardware.com/gallery/index.php?n=13351) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0079.jpg (http://forum.nexthardware.com/gallery/index.php?n=13352) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0085.jpg (http://forum.nexthardware.com/gallery/index.php?n=13353) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0089.jpg (http://forum.nexthardware.com/gallery/index.php?n=13354) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0090.jpg (http://forum.nexthardware.com/gallery/index.php?n=13355) http://forum.nexthardware.com/gallery/images/1426/medium/3_DSC_0091.jpg (http://forum.nexthardware.com/gallery/index.php?n=13356)

Soon to be available PDF mounting GUIDE

Bench Table Hard V2.5 Specifications
-Single Model available, this model will cover all the old V2 versions and perfect matching the new Bench Table Easy V2.5 ( bench Table Easy + Bench Table Hard = EasyHard bench Table)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-new slot for cable passing
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Easy V2.5
-redesigned Arch-Press to be more easy to fix and easy to screw pots or other cooling device to CPU
-Male - Female spacers, no more need of screw for the motherboard Spacers
-Bachelite Handles
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5
-XL-ATX vga support available as accessory (10 slots)

http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0168.jpg (http://forum.nexthardware.com/gallery/index.php?n=13366) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0171.jpg (http://forum.nexthardware.com/gallery/index.php?n=13367) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0172.jpg (http://forum.nexthardware.com/gallery/index.php?n=13368) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0175.jpg (http://forum.nexthardware.com/gallery/index.php?n=13369) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0176.jpg (http://forum.nexthardware.com/gallery/index.php?n=13370) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0180.jpg (http://forum.nexthardware.com/gallery/index.php?n=13371)

Hardware Assembled Air Cooling, No Accessory

http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0114.jpg (http://forum.nexthardware.com/gallery/index.php?n=13374) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0118.jpg (http://forum.nexthardware.com/gallery/index.php?n=13372) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0119.jpg (http://forum.nexthardware.com/gallery/index.php?n=13373)

PDF mounting guide for that table too

From the Fusion of Bench Table Easy and Bench Table Hard, born EasyHard, this 2 bench tables can be used together or separate, it perfectly match through rubber feet and special screw on the top of Bench Table Easy, with that setup the Hard Bench Table can't move in any direction, like the older bench table.

Bench Table EasyHard V2.5 Specifications
hard part
-Single Model available, this model will cover all the old V2 versions and perfect matching the new Bench Table Easy V2.5 ( bench Table Easy + Bench Table Hard = EasyHard bench Table)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-new slot for cable passing
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Easy V2.5
-redesigned Arch-Press to be more easy to fix and easy to screw pots or other cooling device to CPU
-Male - Female spacers, no more need of screw for the motherboard Spacers
-Bachelite Handles
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5
-XL-ATX vga support available as accessory (10 slots)
easy part
Bench Table Easy V2.5 Specifications
-Single Model available, this model will cover all the old V2 versions
-Tipical U bend shape, 90 degrees round corner
-down tray now have a sledge and the fasteners are thumbscrews
-positioning of the support for optical and Hd on Slot, not just on holes
-lateral customization with the name of the product "DimasTech V2.5"
-Compatibility with all the radiators on market(hwlabs, thermochill, tfc, ecc...ecc...)
-no more bolts and hand tools to use, also the bolts are thumbscrews now
-no more hand tools on all the benchtable
-4 hard disk support, 3,5"
-3 optical drive , 5,25"
-new slot for cable passing
-custom cut on the back saying "MADE IN ITALY"
-motherboards Mini ATX compatibilty / motherboards XL-ATX / E-ATX and Micro-ATX
-rubber feet M4 thread for Hand screwing
-3 standard colors always available without painting waiting (black glossy, metal grey and milk white)
-custom color on booking
-full compatibility with new Bench Table Hard V2.5
-4 back holes for water cooling tube passing or for waterccoling fittings
-new Power On and Reset Button "P" and "R" with red and black shrink cables
-USB front Port for Single Pen Drive, very usefull for saving screenshots and no boring about find the Rear USB ports (USB Cable is an Accessory)
-Male - Female spacers, no more need of screw for the motherboard Spacers
-FlexFan supports available as accessory, chromium and black powder coating, it fits on all of the Bench tables done from the begin (v1.4) to the last V2.5 (more news on this accessories in next week)
-XL-ATX vga support available as accessory (10 slots)

http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0181.jpg (http://forum.nexthardware.com/gallery/index.php?n=13380) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0182.jpg (http://forum.nexthardware.com/gallery/index.php?n=13381) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0183.jpg (http://forum.nexthardware.com/gallery/index.php?n=13382) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0184.jpg (http://forum.nexthardware.com/gallery/index.php?n=13383) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0189.jpg (http://forum.nexthardware.com/gallery/index.php?n=13384) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0192.jpg (http://forum.nexthardware.com/gallery/index.php?n=13385)http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0138.jpg (http://forum.nexthardware.com/gallery/index.php?n=13394) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0141.jpg (http://forum.nexthardware.com/gallery/index.php?n=13395) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0145.jpg (http://forum.nexthardware.com/gallery/index.php?n=13396)

Hardware Assembled Air Cooling, No Accessory, only Usb Cable for Easy Part

http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0160.jpg (http://forum.nexthardware.com/gallery/index.php?n=13386) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0161.jpg (http://forum.nexthardware.com/gallery/index.php?n=13387) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0163.jpg (http://forum.nexthardware.com/gallery/index.php?n=13388) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0164.jpg (http://forum.nexthardware.com/gallery/index.php?n=13389) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0167.jpg (http://forum.nexthardware.com/gallery/index.php?n=13391) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0165.jpg (http://forum.nexthardware.com/gallery/index.php?n=13390)

Dimas

02-10-2010, 10:28 AM

Developing Pics, preseries and parts not assembled, packaging sample and FlexFan first try
Bench Table Easy V2.5 Develop Pics
http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0088.jpg (http://forum.nexthardware.com/gallery/index.php?n=12627) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0091.jpg (http://forum.nexthardware.com/gallery/index.php?n=12628) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0092.jpg (http://forum.nexthardware.com/gallery/index.php?n=12629) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0096.jpg (http://forum.nexthardware.com/gallery/index.php?n=12630)http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0100.jpg (http://forum.nexthardware.com/gallery/index.php?n=12631) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0101.jpg (http://forum.nexthardware.com/gallery/index.php?n=12632) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0102.jpg (http://forum.nexthardware.com/gallery/index.php?n=12633) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0104.jpg (http://forum.nexthardware.com/gallery/index.php?n=12634)http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0106.jpg (http://forum.nexthardware.com/gallery/index.php?n=12635) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0109.jpg (http://forum.nexthardware.com/gallery/index.php?n=12636) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0110.jpg (http://forum.nexthardware.com/gallery/index.php?n=12637) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0112.jpg (http://forum.nexthardware.com/gallery/index.php?n=12638)http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0113.jpg (http://forum.nexthardware.com/gallery/index.php?n=12639) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0115.jpg (http://forum.nexthardware.com/gallery/index.php?n=12640) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0116.jpg (http://forum.nexthardware.com/gallery/index.php?n=12641) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0118.jpg (http://forum.nexthardware.com/gallery/index.php?n=12642) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0120.jpg (http://forum.nexthardware.com/gallery/index.php?n=12643)http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0121.jpg (http://forum.nexthardware.com/gallery/index.php?n=12644) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0123.jpg (http://forum.nexthardware.com/gallery/index.php?n=12645) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0124.jpg (http://forum.nexthardware.com/gallery/index.php?n=12646) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0127.jpg (http://forum.nexthardware.com/gallery/index.php?n=12647) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0130.jpg (http://forum.nexthardware.com/gallery/index.php?n=12648)http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0131.jpg (http://forum.nexthardware.com/gallery/index.php?n=12649) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0133.jpg (http://forum.nexthardware.com/gallery/index.php?n=12650) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0135.jpg (http://forum.nexthardware.com/gallery/index.php?n=12651) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0138.jpg (http://forum.nexthardware.com/gallery/index.php?n=12652)http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0140.jpg (http://forum.nexthardware.com/gallery/index.php?n=12653) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0141.jpg (http://forum.nexthardware.com/gallery/index.php?n=12654) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0143.jpg (http://forum.nexthardware.com/gallery/index.php?n=12655) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0144.jpg (http://forum.nexthardware.com/gallery/index.php?n=12656) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0145.jpg (http://forum.nexthardware.com/gallery/index.php?n=12657) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0146.jpg (http://forum.nexthardware.com/gallery/index.php?n=12658) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0152.jpg (http://forum.nexthardware.com/gallery/index.php?n=12659) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0156.jpg (http://forum.nexthardware.com/gallery/index.php?n=12660) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0157.jpg (http://forum.nexthardware.com/gallery/index.php?n=12661) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0158.jpg (http://forum.nexthardware.com/gallery/index.php?n=12662) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0160.jpg (http://forum.nexthardware.com/gallery/index.php?n=12663) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0161.jpg (http://forum.nexthardware.com/gallery/index.php?n=12664) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0162.jpg (http://forum.nexthardware.com/gallery/index.php?n=12665) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0165.jpg (http://forum.nexthardware.com/gallery/index.php?n=12666) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0170.jpg (http://forum.nexthardware.com/gallery/index.php?n=12667) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0171.jpg (http://forum.nexthardware.com/gallery/index.php?n=12668) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0174.jpg (http://forum.nexthardware.com/gallery/index.php?n=12669) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0175.jpg (http://forum.nexthardware.com/gallery/index.php?n=12670) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0175.jpg (http://forum.nexthardware.com/gallery/index.php?n=12670) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0182.jpg (http://forum.nexthardware.com/gallery/index.php?n=12671) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0183.jpg (http://forum.nexthardware.com/gallery/index.php?n=12672) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0184.jpg (http://forum.nexthardware.com/gallery/index.php?n=12673)

Dimas

02-10-2010, 10:29 AM

http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0185.jpg (http://forum.nexthardware.com/gallery/index.php?n=12674) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0187.jpg (http://forum.nexthardware.com/gallery/index.php?n=12675) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0189.jpg (http://forum.nexthardware.com/gallery/index.php?n=12676) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0191.jpg (http://forum.nexthardware.com/gallery/index.php?n=12677) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0194.jpg (http://forum.nexthardware.com/gallery/index.php?n=12678) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0198.jpg (http://forum.nexthardware.com/gallery/index.php?n=12679)
http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0100.jpg (http://forum.nexthardware.com/gallery/index.php?n=12723) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0101.jpg (http://forum.nexthardware.com/gallery/index.php?n=12724) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0105.jpg (http://forum.nexthardware.com/gallery/index.php?n=12725) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0107.jpg (http://forum.nexthardware.com/gallery/index.php?n=12726) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0113.jpg (http://forum.nexthardware.com/gallery/index.php?n=12727)

Gunslinger

02-10-2010, 10:31 AM

Don't forget to post some pics of the "hard" version also. ;)

DrNip

02-10-2010, 10:33 AM

Man I love your designs! Wish you had one just a little smaller. I'm interested in one just slightly bigger than the Classified mobo itself and have the lower compartment for a PSU, hardrive or two and CD. Not interested in all the water cooling stuff, just DICE/LN2 benching. The hardtable rocks though and will prolly suite my needs for the time being.

Dimas

02-10-2010, 10:36 AM

Don't forget to post some pics of the "hard" version also. ;)
yes Mate, it's a pita to make pics to all different colors but will be done until end of week;)

DrNip

02-10-2010, 10:39 AM

You have a link to where these can be bought at for those that don't know? :good:

Dimas

02-10-2010, 10:49 AM

You have a link to where these can be bought at for those that don't know? :good:
assassin post some news in this thread;) there's also the link where to see, dont' look at picture, have still to be updated...
http://overclockaholics.com/forums/showthread.php?t=1795

about the table you asked, i think it can be arranged, just sum up all of your request, and i'll see if is a project we can develop;)

Kal-EL

02-10-2010, 10:53 AM

Thank you for posting Dimas, you have a fine product line at Dimastech and we're happy to have you here at OCA. :good:

DrNip

02-10-2010, 11:07 AM

assassin post some news in this thread;) there's also the link where to see, dont' look at picture, have still to be updated...
http://overclockaholics.com/forums/showthread.php?t=1795

about the table you asked, i think it can be arranged, just sum up all of your request, and i'll see if is a project we can develop;)

My request is simple. I need room for a mobo, PSU and a set of harddrives. I have a portable CD drive so having room for one on a bench table is pointless or at least for me. The table needs to be slimmed lined as possible. I transport my setup all the time, mainly to whatever part of the house is coolest, sometimes the garage so it needs to be light. I use the Classy as reference as that is what I bench with. Needs to be a little bigger than that. Here is a picture of my current bench table setup with old hardware on it. I love it but hate it as it is plastic. I custom made a bracket to house a set of 120mm fans to blow across the RAM, vreg as well as NB.

http://i269.photobucket.com/albums/jj55/travisjcottrell/th_IMG_4105.jpg (http://i269.photobucket.com/albums/jj55/travisjcottrell/IMG_4105.jpg) http://i269.photobucket.com/albums/jj55/travisjcottrell/th_IMG_4106.jpg (http://i269.photobucket.com/albums/jj55/travisjcottrell/IMG_4106.jpg)

I currently have a set of 120mm x 38mm fans on there now instead of the 25mm. Your current table would work minus all the water cooling space. That would prolly get the job done. Hopefully this helps or maybe even gives you new ideas.

Buckeye

02-10-2010, 11:44 AM

Very Nice Andrea, you always out do yourself :)

I haven't spoken with you in awhile ... I hope all is well :)

Neuromancer

02-10-2010, 12:23 PM

I am not a big fan of buying a bench station over building one myself, but have to say.. I someday will own one of them :) They are very well designed and attractive.

Maybe it is partly because it reminds me of my old PC case from the mid 80s :)

Nice work Andrea

Dimas

02-11-2010, 10:42 AM

Very Nice Andrea, you always out do yourself :)

I haven't spoken with you in awhile ... I hope all is well :)

everything fine, last year was like hell but this new year is going good...i hope all is well for you too;)

I am not a big fan of buying a bench station over building one myself, but have to say.. I someday will own one of them :) They are very well designed and attractive.

Maybe it is partly because it reminds me of my old PC case from the mid 80s :)

Nice work Andrea
thank you for nice words...for me that i'm not a "professional designer" it's an honor...
i just added pics of the Bench Table Hard V2.5...i think the version that around there most overclocker will like;)

Kal-EL

02-11-2010, 10:53 AM

Love that Bench Table Hard V2.5, actually, I love the whole setup. Prices arn't too bad for U.S. shipping as well huh?

What is it? like $14 USD?

GFDuke

02-11-2010, 10:55 AM

I like my Bench Table hard. Its great for quick in and outs. I actually have Layers of 1/2 foem between the motherboard and the bench table for extreme cooliing insulation. I have no worries about the back of my motherboard at all. The one thing i couldn't work out was the CPU fan/ dice pot hold down rod. I wanted to use it for my Dice pot but no matter how i positioned the carrying beam for the rod, i couldnt get it to hit center.

Neuromancer

02-11-2010, 11:14 AM

I love the flexible fan mount, and the all thumbscrew design as well :)

Witchdoctor

02-11-2010, 11:33 AM

HITandRUN

02-11-2010, 11:38 AM

What is that for just to hold it place till you bolt your pot down ??

Nope you can actually hold the pot down with it. I have seen this being used by the Japanese benching team a lot. Don't know exactly who had this idea first but its very innovative. I love the Dimas bench station.

Witchdoctor

02-11-2010, 11:40 AM

So the rod is just in the with the dice and Ln2 ??

It would make insulating the pot a snap ... no retainer to deal with = WIN

DrNip

02-11-2010, 11:44 AM

I would like to know how much shipping is on the black hard table to the U.S.

Gunslinger

02-11-2010, 11:46 AM

It was right around $155 shipped when I checked the other night. :D

DrNip

02-11-2010, 12:17 PM

No customs fees I assume.

Gunslinger

02-11-2010, 01:04 PM

I didn't pay any customs fees when I bought the Easy version.

Buckeye

02-11-2010, 01:33 PM

hmm... I cant remember the amount but I did recieve a bill from the shipping company for custom free's for the two I ordered. It was not right away, maybe a few weeks later. If I remember right it was like $35 for both cases.

Dimas

02-15-2010, 02:11 AM

hello Guys, just added the EasyHard pics in first page;)
the shipping cost to USA and Canada are specialy calculated, hope the USD/EUR change goes a bit down more...

Splave

02-15-2010, 03:17 AM

god If I dont win one of these im going to have to buy one :) so cool man

RomDominance

02-15-2010, 04:41 AM

These tables seem very clean and functional...nice D!

Witchdoctor

02-15-2010, 04:57 AM

Dimas

02-15-2010, 08:47 PM

Very sharp looking product Dimas .....

Question: Are all the edges rolled so there are no places to get cut open on ???

They look it but impossible to tell 100% .....

The fit and finish just look amazing ...... in a black and red two tone finsh to roll with a Classy would be sick......
thanks for kind words to all guys;)
there's no way to cut,couse all the edges are taken by Paint, and the paint cover the edge and also assure that metal is not possible to cut hands.
this kind of work is done on all parts, except the mirrored INOX version, this is crude metal.

GFDuke

02-15-2010, 11:44 PM

I can attest that the edges are smooth and finished nice. It is a good piece of work. The only problem i had with the setup was that the cpu hold down rod dosn't exactly line up with the center of the heatsink. I don't use it and i mount my heatsinks with the hardware they came with.

Kal-EL

02-16-2010, 12:09 AM

karmakazi

02-16-2010, 07:08 AM

Hi Andrea! I will respond to your PM @ XS soon my friend.:thumbsup:

These tables are so incredibly clean looking and well designed. I love them!

GFDuke

02-16-2010, 02:41 PM

Was that the V2.5 as well Duke? or the older version?

@Dimas, is there a difference in the arch press between the two?

The arch press looks the same to me bro. Seriously i tried to mount my pot for dice action and there was no way i could get the press to center on my pot. So i had to use the hardware that came with the pot.

Dimas

02-17-2010, 08:40 PM

Was that the V2.5 as well Duke? or the older version?

@Dimas, is there a difference in the arch press between the two?

the arch press of the V2.5 is littler couse the table itself it's also littler, probably when Duke it's trying to fix the Arch can't get in the right position couse holes distance are fixed, if some one got some suggestion to improve the ARCH press...

Dimas

02-17-2010, 08:41 PM

The arch press looks the same to me bro. Seriously i tried to mount my pot for dice action and there was no way i could get the press to center on my pot. So i had to use the hardware that came with the pot.
so you think we have to include also a Big base on top of Press to distribute better the load?

Witchdoctor

02-17-2010, 10:40 PM

Instead of sloted holes what if the arch slid in a groove to eliminate fixed positioning laterally.

The arch slides this way across the top but not along the sides of the table.

I am sure this would create weakness if it were slotted the whole way.
A rail system would probably have to be incorperated. I could draw this but I am sure you have engineers that could do it in better detail than myself with a pencil and paper.

It would have to be a U with top rerturns with a opening in the middle. The edge of the table could be solid and may need reenforced to accomidate a tightening mechanism from the bridge itself.

Hope you can picture what I am talking about here. This would create a slide with no limitations just like the top rail of the bridge/Arch .....

GFDuke

02-17-2010, 11:32 PM

The top of the arch is slotted almost all the way to the middle and stops the rod short of the centering. The side holes need to be more versitile.

Witchdoctor

02-18-2010, 12:55 AM

They are great pics duke that middel on the top rail has to go. If not strong enough it woiuld need to be made of a heavier material as on the top it has to be able to go through the material to be effective

GFDuke

02-18-2010, 01:19 AM

I was also thinking that the middle piece is there for support. I think that maybe the middle could be a slot about 100-150mm. Then a solid support point at each end of the middle hole and then some 100 - 150mm slots on each side of that. Are there any boards that would need slots on the arch left and right sides? The slots on the side of the tray just need to be longer so the arch can have more movement.

This is a rough drawing but i think this design would work out.

Russianhaxor

02-24-2010, 01:10 PM

So sexy.

Dimas

02-26-2010, 09:56 PM

hei Guys,coming back from a 6 days without internet/phone line, that was bad, i've been taking all that nice suggestion for next incoming design;)
how the competition is going?

Neuromancer

02-26-2010, 11:14 PM

Welcome back. Going without Internet always sucks :( phone... mmm, not so much :)

V2-V3

03-01-2010, 06:21 PM

Woot!

honda and I just ordered 2 of these bad boys! hoping to have them for benching this weekend.

Hondacity

03-05-2010, 10:58 PM

they didn't arrive friday.... dimas said friday...

MaadDaawg

03-06-2010, 08:42 AM

Maybe we should be talking group purchase price ??? Or sponsorship of the OC Alliance ??? Would have to be some good PR if we all used em on posted pics on the bot..huh,huh.. whatcha think?

Hondacity

03-06-2010, 07:34 PM

we already bought two..hehehe sorry wish we did a group buy and benefited with shipping...

GFDuke

03-07-2010, 01:36 AM

that makes 3 of us with one. def. a great quick change out board. dayum what am i doing on the internet here in <<tulum <mexico. <i am def sick.

Kal-EL

03-07-2010, 04:02 AM

:D:D

RomDominance

03-07-2010, 05:34 AM

that makes 3 of us with one. def. a great quick change out board. dayum what am i doing on the internet here in <<tulum <mexico. <i am def sick.

Hope your having a great time Dukie, miss you bud. Been to Talum before, pretty place. Make the trip over to Xel-ja a take a snorkel or free dive in there....very kewl experience with the dolphins and the brackish water...prettiest corals in that area fosho.:thumbsup:

Dimas

03-08-2010, 11:23 AM

hello Guys, thank for your supports, DHL is doing good job, i just check that ship timing is about 2 to 4 working days, so pretty fast for a overseas shipping, considering that goods start from Italy, not known for fast shipping...
about group orders...just wait...ehehe....

Dimas

03-08-2010, 10:56 PM

some new color customization, it is a Carbon Look bench table Easy V2.5
it's a prototype and maybe it need another run of glossy trasparent paint.

http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0089_1__1_.jpg (http://forum.nexthardware.com/gallery/index.php?n=13587) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0089_1__2_.jpg (http://forum.nexthardware.com/gallery/index.php?n=13588) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0089___6_.jpg (http://forum.nexthardware.com/gallery/index.php?n=13594) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0089_1.jpg (http://forum.nexthardware.com/gallery/index.php?n=13593) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0089_1__3_.jpg (http://forum.nexthardware.com/gallery/index.php?n=13589) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0089_1__4_.jpg (http://forum.nexthardware.com/gallery/index.php?n=13590) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0089_1__5_.jpg (http://forum.nexthardware.com/gallery/index.php?n=13591) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0089_1__7_.jpg (http://forum.nexthardware.com/gallery/index.php?n=13592)

together with the carbon look, there are the XL-ATX adding cards support;)
http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0077.jpg (http://forum.nexthardware.com/gallery/index.php?n=13598) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0073.jpg (http://forum.nexthardware.com/gallery/index.php?n=13597) http://forum.nexthardware.com/gallery/images/1426/medium/2_DSC_0069.jpg (http://forum.nexthardware.com/gallery/index.php?n=13596) http://forum.nexthardware.com/gallery/images/1426/medium/1_DSC_0066.jpg (http://forum.nexthardware.com/gallery/index.php?n=13595)

Assassin48

03-08-2010, 11:09 PM

they keep looking better and better!

crustytheclown

03-09-2010, 03:14 AM

Omg carbon look is awesome Andrea...!!!

Gunslinger

03-09-2010, 03:38 AM

Sick looking table, that carbon look is awesome. Just ordered the inox hard version for the Classy 762.

MaadDaawg

03-09-2010, 04:31 AM

Love that new carbon look ... wouldn't add glossy IMO

Kal-EL

03-09-2010, 05:27 AM

Nice looking carbon version :thumbsup:

Dimas

03-09-2010, 10:56 AM

thanks for feedbacks, will try also some other color paint, like military or wood(like car wood) or if someone have special request to try, please give me a shot for suggestions,i can see if is possible..

crustytheclown

03-09-2010, 08:50 PM

Just give it a kryptonite look and send it to Supes...hehehe

Kal-EL

03-09-2010, 09:44 PM

Just give it a kryptonite look and send it to Supes...hehehe

Hehe :D, we still waiting for your prize photo shoot crusty ;)

DrNip

03-10-2010, 02:10 AM

I like the carbon fiber look!

Chuchnit

03-10-2010, 02:27 AM

I like the carbon fiber look!

Same here. After seeing the carbon I can't suggest anything else :D

Witchdoctor

03-10-2010, 02:37 AM

Agreed the Carbon Fiber is the end all bad ass..................

Neuromancer

03-10-2010, 03:58 AM

+100 on the CF

FACE

03-10-2010, 06:00 AM

Really digging the tables. The Carbon is a huge plus.

Good stuff, Dimas!

Russianhaxor

03-12-2010, 03:53 PM

Hondacity

03-21-2010, 06:36 PM

dimas pulled thru

packaging sucks but oh well

http://i24.photobucket.com/albums/c5/hondacity25/P1030064Medium.jpg

GFDuke

03-25-2010, 12:22 AM

Witchdoctor

03-25-2010, 01:09 AM

Found a hell of a deal on this bench table............... :taunt:

HITandRUN

03-25-2010, 02:02 AM

Found a hell of a deal on this bench table............... :taunt:

I love it! :D

Dimas

03-25-2010, 07:49 AM

Yea the packing is a weird kind of styrofoam and theres a ton of it. You also have to kind of figure out where all the srews, washers and nuts go on your own to as there is no guide. lol not a biggie but still a pita. Nice deck you got there. I like the black.

the new Hard Table Packaging is on making, i think this week will arrive and we can show pics here;)

about guide, working on that too...the Easy one is ready, for the Hard we delay all waiting the packaging.

Hondacity

03-25-2010, 08:48 AM

no need for the guid..there are only a few set of screws...

the plastic knobs crack though...we'll be using wing nuts

Jor-El

03-25-2010, 09:39 AM

no need for the guid..there are only a few set of screws...

the plastic knobs crack though...we'll be using wing nuts

So Honda what about the bench table? Is it worth the wait? Why not a simple Tech Station or a DD Torture Rack that arrives in 3 days (and costs less)?

*All respect to your work Dimas I'm just wondering...

Hondacity

03-25-2010, 10:00 AM

Jor-El

03-25-2010, 12:07 PM

its good for benching man...the tall studs...and the fan mount will make it real easy to bench with pots....

i love it :D

its a 10day wait for me...but it was worth it....its only 144$ total...

i don't like the danger den...i have that..it sucks...it squeeks...

That is shipping included?
Not bad at all, I always though shipping cross Atlantic would make these purchases a bit pricey.

Hondacity

03-25-2010, 12:32 PM

yep its with shipping already....

its a good heavy table...

Jor-El

03-26-2010, 11:40 AM

yep its with shipping already....

its a good heavy table...

Honda in the pics you posted it looks perfect but can you still hold down the mobo completely secured after insulation (thick almost 1in) + backplate etc?

Hondacity

03-26-2010, 11:56 AM

Honda in the pics you posted it looks perfect but can you still hold down the mobo completely secured after insulation (thick almost 1in) + backplate etc?

i don't have the sheet insulation from vince yet...its prolly outside my door..i miss my house :ohcrap:

tonight i'll be testing that gb mobo ...if its good..its gone for 100$ :D

GFDuke

03-26-2010, 12:26 PM

2 sheets of 1/2 in insulation snug it down nicely. Its even a bit tight. So be careful and tighten down the mobo screws like you would putting a tire on a car. Go opposites and only a turn at a time on each until its tightened all the way. If you do them about 1/2in past the mobo edges then you'll have no need to put anything on the back of your motherboard to insulate it.

Gunslinger

03-26-2010, 12:30 PM

I've got a sheet of 1 inch, with my motherboard screwed down, nice and tight seal. Pictures later tonight. :D

Hondacity

03-26-2010, 01:57 PM

somebody tried 1inch and 1/8....it was super snug :D......ill try 1.125 inch too when i get the sheet stuff :D

Jor-El

04-01-2010, 06:11 AM

dimas pulled thru

packaging sucks but oh well

http://i24.photobucket.com/albums/c5/hondacity25/P1030064Medium.jpg

Honda, whats the model number/name ^^ and how do we get a hold of Dimas?

Hondacity

04-01-2010, 08:03 AM

i ordered it at his website....

http://www.dimastech.it/EN/

10days to get to me......

there are 3 main models....

i just got the cheapest.......v2.5 ---- hard!!! :D

Hondacity

04-01-2010, 08:10 AM

email dimas....for the latest version....or pm here..or @xs

he sent me and v2-v3 the old v2.5hard......the new v2.5hard has a long straight hole/slot for the center pot mount...its pictured on his homepage......the old one has multi slots...which didn't center the damn center mount.... dimas owes me the new table...it was mentioned @ xs thread...but he didn't revise the old revisions..which was easily revised...

i'm not using the center mount anyways......its fine.. though...i use my own mount..which works better anyways...

still i want the freaking new version.....

Dimas

04-01-2010, 10:55 AM

the V2.5 Hard it's the latest version available, the green picture at website are from the OLD V1 Hard Table, from 2 years ago, the arch press of that table bends a lot, so we had to make 2 multi slots, but unluckly on someboards comes perfectly to the center of cpu socket.

we're trying to solve this problem for next revision, hoping that the ArchPress can be used the same of next motherboards.

Gunslinger

04-01-2010, 02:09 PM

Here is my "hard" table v2.5 with the 1" armaflex installed. I also gouged some out to make room for the F1 EE backplate, forms a perfect air tight seal.

GFDuke

04-01-2010, 02:28 PM

Was it to tight a fit without gouging out the insulation for the F1 backplate?

Gunslinger

04-01-2010, 02:34 PM

No it wasn't too tight, just something I did spur of the moment, and it worked out perfectly.

Hondacity

04-01-2010, 03:10 PM

nice silvery color...black is bland black..lol

GFDuke

04-02-2010, 12:20 PM

nice silvery color...black is bland black..lol

Yea mines the stainless steel one too. Its a nice looking piece of work.

Hondacity

08-13-2010, 08:13 PM

ok so been looking at these sexy tables...anybody need some accessories?

i miss my table(left it @ v2-v3s place) ...i need a table asap

i think i'll go easy...this time....30euro savings with the scratched tables...

Witchdoctor

08-14-2010, 02:26 AM

MaadDaawg

08-14-2010, 04:33 AM

Banchetto

Gunslinger

08-14-2010, 06:04 AM

I've also got the easy version which holds the 24/7 system. Very usefull for those of us who change out hardware frequently. :thumbsup:

Hondacity

08-14-2010, 07:43 AM

They are nice works of art for sure

but the buisiness end is simply a flat surface with some holes drilled into it

Can easily be replicated in 30 minutes with a 12 dollar piece of MDF FTW

or in a pinch a good solid motherboard box ............ :scared:

Tools required:
saw
drill
few speed bits
few hole saw
jigsaw

LOL tools...all i have is a screw driver.

Banchetto

banchetto means "a feast"

I've also got the easy version which holds the 24/7 system. Very usefull for those of us who change out hardware frequently. :thumbsup:

what color didya get?

friendly offer is closed..orderin ina few:D

Hondacity

08-26-2010, 04:33 PM

got my 2nd dimastech wooooot

i hope the box contains a bench table..i'll open it @ v2-v3's ln2 party this weekend :D

Kal-EL

08-26-2010, 06:32 PM

Kool bones Honda, give us the pron down when you get a chance :)

HITandRUN

08-26-2010, 06:41 PM

Kool bones Honda, give us the pron down when you get a chance :)

Yes! Yes! PRON! :shock:

Hondacity

09-07-2010, 05:39 AM

here's my silver woooeasy :D

awesome awesome :D super heavyy

hd dvd and psu at the bottom....and out of the way...
vreg and ram cooling..super...my temps are ridiculous

PolRoger

10-29-2010, 04:17 PM

These are nice tables. I've already checked out the Dimastech thread over at XS. I've got two of those plastic topdeck tech stations and I've been wanting to get a hard table v 2.5. I like the "inox" finish unit. Just need to get the funds available.