View Full Version : Funkmaster Kal's akimbos 8800gt's on steroids
Splave
03-18-2010, 04:01 PM
Easy peasy mod fo sheezy
Ram is hynix hy5rs123235b, so we will go with the regular volt mod. Popped the lid and there was a bunch of dog hair rofl! :cool3:
http://img227.imageshack.us/img227/3/8800gtg92gtsvgpuvmemmodgx6.jpg
No 20k vrs so I will be using 50ks tuned down to 20k :thumbsup:
Kal-EL
03-18-2010, 04:11 PM
Dog hair should make it go faster :morpheus:
Splave
03-18-2010, 04:14 PM
I meant dong hair rofl jk jk
Kal-EL
03-18-2010, 04:54 PM
Who'd I buy those cards off of anyway??????
Splave
03-18-2010, 05:09 PM
2chesapeakes makes sense I guess lol
EDIT: Prepping molex's
Initial tests are funky, the one card is idling pretty hot 54C 100% fan
other is 40C 100%. The warm card also adds 15-20 seconds to the boot time for some reason :Dizzy: and is freezing the desktop :eek:
Stock
vgpu 1.185v
vddr 2.01v
Card 1:
aq3 fails @ 837core
aq3 fails @ 1180mem
Card 2:
Going to re-tim and see if its just a heat issue
HITandRUN
03-18-2010, 05:55 PM
2chesapeakes makes sense I guess lol
EDIT: Prepping molex's
Initial tests are funky, the one card is idling pretty hot 54C 100% fan
other is 40C 100%. The warm card also adds 15-20 seconds to the boot time for some reason :Dizzy: and is freezing the desktop :eek:
Stock
vgpu 1.185v
vddr 2.01v
Desktop freezing might need a OCP mod. My card used to do it and after the mod it was gone.
Splave
03-18-2010, 06:01 PM
Desktop freezing might need a OCP mod. My card used to do it and after the mod it was gone.
It should be fine though pre-mod right? I havent done any mods yet and its messing up.
These are def cherry cores on the akimbos 818 passes no mods rofl wtf? :eek:
HITandRUN
03-18-2010, 06:19 PM
It should be fine though pre-mod right? I havent done any mods yet and its messing up.
These are def cherry cores on the akimbos 818 passes no mods rofl wtf? :eek:
Oh I thought you already modded the core. Holy mother 818 with no extra V.
Kal-EL
03-18-2010, 06:52 PM
You sure you didn't mix up nip's card with these? :morpheus:
2chesapeakes
03-18-2010, 11:07 PM
I was able to run vantage 833 core 1040mem with the cards on stock cooling. The dog hair made for some great TIM.
http://hwbot.org/community/submission/920479_2chesapeakes_3dmark_vantage___performance_2 x_geforce_8800_gt_512_mb_14575_marks
*Grabs clippers and begins looking for the dog*
DrNip
03-19-2010, 01:15 AM
You sure you didn't mix up nip's card with these? :morpheus: Ah man is that good or bad? :Dizzy:
I was able to run vantage 833 core 1040mem with the cards on stock cooling. The dog hair made for some great TIM.
http://hwbot.org/community/submission/920479_2chesapeakes_3dmark_vantage___performance_2 x_geforce_8800_gt_512_mb_14575_marks :eek:
Splave
03-19-2010, 03:45 AM
nice I jumped from 824 to 837 and first card froze in aq3 so 833 might be the max as jeff stated. Ram was good at 1150 the first card.
Going to hit the second card on my break and get read points on. Then the mod will be done when I get home from work and I will drop them in the mail tonight!
Whats the best way to ship kal-san?
Kal-EL
03-19-2010, 08:35 AM
Ship via whichever carrier you prefer, they alll tend to have drop kick box moments so just pack it well for the long haul over teh pacific. The pilots like to do roll-overs at the mid-way point.
Did you hit the 9800gx2 already? May as well ship them all together maybe?
Splave
03-19-2010, 08:59 AM
nope I can do the gx2 tonight though no probs
ocgmj
03-19-2010, 09:24 AM
Kal is going to need to order a few additional gpu pots :D
Kal-EL
03-19-2010, 09:33 AM
I think 4 pots should do o.k.? :D
Splave
03-19-2010, 06:16 PM
1 card done completely testing clocks at 1.25vgpu 2.1vddr :)
Not going to try to hit high clocks, going to make sure it takes it so I can crank on your and dents gx2's
Kal-EL
03-19-2010, 06:24 PM
Kool, cascade is set to arrive on monday, I'll let her sit till the weekend and prep the gpu pots during the week for a weekend grind session.
Splave
03-19-2010, 07:22 PM
awesome, prepare to take every gold for single and sli 8800gt's these cards are like nothing I have ever seen.
850 core 1.3v, had to up the volts alot as Im thinking it wants more cold idles at 41 and hits 48 in aq3
Will run mem high real quick at 2.1v and see what that hits then will check the other card. :Hi:
EDIT: 1188 mem 2.1v win :)
Next one up momentarily
Kal-EL
03-19-2010, 07:37 PM
I AM...............................prepared :)
Happy you're posting the screenies and voltage numbers too bro, it'll help the process :D
Splave
03-19-2010, 08:26 PM
mod done on the second card. Still getting weird issues with it though. The 10 second pause before the board even boots to the splash screen when its installed and windows loading is hit or miss. IDK if it doesnt like the board or what. Going to make sure nothings being shorted by the cooler but vr's are working 1.25vgpu and 2.1vddr
I will figure it out :)
Kal-EL
03-19-2010, 08:54 PM
O.k., yah, sounds too wierd, maybe something on the pcb is fubarred?
Splave
03-20-2010, 02:40 AM
could be but its just funny runs no problem when drivers arent installed and or I run safe mode and sometimes it does boot up fine and even benches fine??? Tried 169.01 (fav 8800 drivers) and would just give me the blinking dash in the upper left corner and blank screen.
Going to reinstall my retail XP on my regular HD and see if that works, funny the other one is no problem though.
Stayed up till 3:30am messing with it rofl, head is spinning at work right now lol.
You might want to try flashing that card with the other's bios... When I still had 2x g92 gt's the second was flaky until I flashed it. After that, I could hit the same clocks on both cards... stock volts though.
Splave
03-20-2010, 03:13 AM
excellent idea, I will dump the good one onto the bad. Cheers!
No problem buddy... :thumbsup:
HITandRUN
03-20-2010, 03:31 AM
You might want to try flashing that card with the other's bios... When I still had 2x g92 gt's the second was flaky until I flashed it. After that, I could hit the same clocks on both cards... stock volts though.
Yeah this is a good idea to try but the entire issues sounds like there is something else going on. Are both cards running on the same bios? Check the sticker in the back. :thumbsup:
Splave
03-20-2010, 04:15 AM
Ripped the stickers off as they where covering the vgpu mod lol oops!
Will verify in gpu-z the bios version.
Kal-EL
03-20-2010, 08:54 AM
Check the bios rev on each, might have to flash teh funk out of the funky card.
Ha! Everyone knows the funk is here to stay! :dance:
The 8800gts 512 is my favourite card by far,
i've killed around 8 of them :D.
my current one does 1200 / 1180 on 3Dmark 2003, its uploaded to hwbot :D.
You will love this gts512, best air / dice/ ln2 scaling card :<
Splave
03-21-2010, 04:26 AM
well didnt flash the 2nd card or anything and its working great today rofl????
I think it just wasnt seated right on the torture rack. This ud3lr is one of those really small boards and the holes for cards are off center a bit so it wasnt sitting flush to the pci-e slot. Dumbass.
Thats all she wrote, best of luck with these kal
http://overclockaholics.com/forums/attachment.php?attachmentid=1794&stc=1&d=1269183289
Kal-EL
03-21-2010, 08:39 AM
Thx Splave, you're a gentleman and a clocker.
Kal-EL
04-18-2010, 09:47 PM
Been squirlin around this gulftown for the last 25L, something mysterious is afoot with the chip. Cold bug moved down from -155c to -140c which still aint too bad. She is a voltage pig howver. First session was a waste cuz I mounted the sucker too tight. Second session was better. I forgot to go back and take the 06 record with the card. Take care of that tomorrow.
Here is some decent 8800gt clocks on cool air:
http://www.overclockaholics.com/Kal/Corei7/G_Money_/8800gt512/3d05_8800gt512/35608.JPG
http://www.overclockaholics.com/Kal/Corei7/G_Money_/8800gt512/3d06_8800gt_512/3D06/20324_1_39vgpu_2_24vmem.JPG
HITandRUN
04-19-2010, 02:42 AM
Very nice boss! Man the 06 WR has been my dream with this card for a while now and I think I have something here which I finally use so you have some competition. :D
Kal-EL
04-19-2010, 04:19 AM
Very nice boss! Man the 06 WR has been my dream with this card for a while now and I think I have something here which I finally use so you have some competition. :D
Kool bones brudder Run, make sure the card is v-modded, cpu speed doesn't appear to open up much on the card as its not bound on the gulftown setup. GPU clocks increase are the best tickler for this combo. I'll do my best to make it interesting for you with this goofy gulfy.
Splave
04-19-2010, 04:23 AM
holy nutsack, I guesse they held up for the long ride! :) awesome clock, seriously. This still on stock cooler?!@$
Kal-EL
04-19-2010, 04:26 AM
holy nutsack, I guesse they held up for the long ride! :) awesome clock, seriously. This still on stock cooler?!@$
Stock cooler with cool air running over it. V-mod is awesome sauce :)
Does the voltage usually slowly droop off from boot to boot? I keep having to turn to bring vgpu back up.
I wonder what she'll do with sub-zero temps? Bah! Gufltown needs fixin first ;)
Splave
04-19-2010, 04:29 AM
how much v-loss we talking here?
Kal-EL
04-19-2010, 04:37 AM
how much v-loss we talking here?
Its slow and gradual but usually like .02 volts between boots on the vgpu.
HITandRUN
04-19-2010, 07:03 AM
Its slow and gradual but usually like .02 volts between boots on the vgpu.
Maybe the trim pot is going bad slowly.
Splave
04-19-2010, 07:05 AM
could be, if so I can mail you a couple kal if you cant find them locally. Would be easy to pop new ones on if need be
Kal-EL
04-19-2010, 07:27 AM
could be, if so I can mail you a couple kal if you cant find them locally. Would be easy to pop new ones on if need be
Thx splave, I think I'll be o.k., its just a quick twist, long as the trimmmer twister thingy doesn't eventually fall out :shock:
Splave
04-20-2010, 04:35 PM
nah :) but if it starts to click when you turn it its maxed
Kal-EL
05-02-2010, 01:11 AM
Ah crapola!
That one that was acting up did its final episode. I mounted the pot on the wrong damned card. Sucker is good to go without the driver installed but once you install the driver "No Video". The other card is strong tho, shouldnt potted that sucker first. Bummer, this cascade's been running for going on 15 hours now, I think it can run while I prep the other card, x-'s fingers :) cuz we need about 40 more boints to pass the KGB.
Splave, what point did you use for vmem read? :Hi:
Splave
05-10-2010, 04:19 AM
green wire brotha man!
http://overclockaholics.com/forums/showpost.php?p=32190&postcount=33
Did you use the larger cap at the top left? there are 6 there...
Splave
05-10-2010, 04:37 AM
try these guys
Thanks.... was hoping you remembered which one you used.... FACE = was trying to be a lazy modder... :laughing:
I'll check 'em out. :thumbsup: