View Full Version : e762 post code 62 at cold boot
Splave
05-05-2010, 03:58 AM
Very strange, with the A0 locked and loaded I get F3 F6 F3 62 and hangs on 62. Thought it was CBB but at same settings its moving around 20+c. Sometimes I can boot -118 sometimes it takes -89 to boot. Very weird. Also after a BSOD or freeze the reset button is unresponsive then it will shut off and on reboot it will post F3 then cut power, F3 then cut power and will keep doing this till I clear cmos.
BTW with the A0 it defaults cpu pll to 2.05v :blink:
This chip is very illogical, and completely random but nasty as fauk :thumbsup:
I ran out of ln2 in my pitcher and had to head to work so I was at -85c and for fun it passed pifast at 5.9ghz 1.75 volts rofl.
Chuchnit
05-05-2010, 04:05 AM
Very strange, with the A0 locked and loaded I get F3 F6 F3 62 and hangs on 62. Thought it was CBB but at same settings its moving around 20+c. Sometimes I can boot -118 sometimes it takes -89 to boot. Very weird. Also after a BSOD or freeze the reset button is unresponsive then it will shut off and on reboot it will post F3 then cut power, F3 then cut power and will keep doing this till I clear cmos.
BTW with the A0 it defaults cpu pll to 2.05v :blink:
This chip is very illogical, and completely random but nasty as fauk :thumbsup:
I ran out of ln2 in my pitcher and had to head to work so I was at -85c and for fun it passed pifast at 5.9ghz 1.75 volts rofl.
Maybe try one of the older beta BIOS made for the A0's? Kal has a good one he could send you.
Splave
05-05-2010, 04:09 AM
would be great
DrNip
05-05-2010, 04:15 AM
The newer BIOS defaults to 2.05 for some reason when the jumper is moved. My 759 does it too.
Extreme Cooling Mode for Classified Motherboards – BIOS shows 2.055v CPU PLL when X-Cool jumper is moved (1.60v Real)
http://kingpincooling.com/forum/showpost.php?p=8276&postcount=1
Splave
05-05-2010, 04:21 AM
oh cool so thats normal
Yup, my 760 shows the same.... using bios 56.
Splave
05-05-2010, 04:44 AM
still worried about 62, its annoying as hell.
Chuchnit
05-05-2010, 04:47 AM
PM Kal for that BIOS he uses. He loved it.
Gutterz
05-05-2010, 05:04 AM
What jumper on the 759? the CSC Strap by the dimms?
Chuchnit
05-05-2010, 05:06 AM
What jumper on the 759? the CSC Strap by the dimms?
The jumper beside the NB and behind the memory dimms. X-cool I think is what it is. Has anyone played with the strap jumper?
Splave
05-05-2010, 05:09 AM
nope never tryed
Patch
05-05-2010, 05:52 AM
Never had a the 62 postcode before.
But I've seen the F3/power off cycle many times. Sometimes just shutting down the PSU for a sec without clearing CMOS will break the cycle.
Chuchnit
05-05-2010, 05:55 AM
Shammy responded to you Splig. :thumbsup:
Splave
05-05-2010, 06:44 AM
guess I will have to check my slots and mount, great having shammy around :)
MaadDaawg
05-05-2010, 07:00 AM
Never had a the 62 postcode before.
But I've seen the F3/power off cycle many times. Sometimes just shutting down the PSU for a sec without clearing CMOS will break the cycle.
same here
but, my 762 defaults to 2.02 cpu pll as well ??
Have to check Shammy's Lair lol
DrNip
05-05-2010, 09:46 AM
What jumper on the 759? the CSC Strap by the dimms?
http://i269.photobucket.com/albums/jj55/travisjcottrell/th_IMG_4547.jpg (http://i269.photobucket.com/albums/jj55/travisjcottrell/IMG_4547.jpg)