Asus WS Revolution - 2600K

[rickss69]

Finally arrived today but I am stuck in bios atm...seems my mouse cursor is stuck to the extreme left side of the screen and keyboard is unresponsive. I would have preferred a tradition bios...

[Splave]

^ +1

[Witchdoctor]

Man that blows....

Have not even checked, are there any new BIOS files for them yet ?

Got mine yesterday but waiting on a cooler :shock: .... H70 ??? :ohcrap:

we'll see LOL

Have to install tile in my kitchen this weekend but hope to get time to slap this thing together as well ....

[DrNip]

Wired, rf, bluetooth keyboard/mouse?

[rickss69]

Wired usb mouse/keyboard...it's like a magnet is holding the cursor to the right side of the screen. I think ctrl/M takes you to the standard bios but no luck yet.

[DrNip]

Does keyboard shortcuts work?

[Witchdoctor]

HAve PS/2 set of keys or mouse ?

worth a shot

[Hondacity]

i wonder if asus will support overvoltage pll on this board...

so far asus pro/deluxe and m4e only has it...or i haven't seen it yet

[HITandRUN]

HAve PS/2 set of keys or mouse ?

worth a shot

Yeah this is what I would try. ;)

[rickss69]

Changed keyboard and got the mouse to work for a moment but it reverted back to the same old s**t. Managed to get OS to load but now have no mouse cursor available. Jesus...

[DrNip]

I'm clueless on this one. :Dizzy:

[rickss69]

Gotta go to work now - I'll mess with it later.

[ocgmj]

Which usb ports do you have it plugged in? Might be a option in bios to enable/disable usb keyboard & mouse.

[Witchdoctor]

http://www.mediafire.com/?k1ycn0cwlgxk2yb


Worth a shot if you have not already tried it

[Neuromancer]

Going to be tough to flash the BIOS without KB/Mouse...

[Hondacity]

you don't need kb and mouse for the rog boards..im not sure about this board though

[Witchdoctor]

Going to be tough to flash the BIOS without KB/Mouse...

:ohcrap:

Forgot .......... Hmmm

Wondering now if the EFI is all that ?

[rickss69]

Luckily I was able to snag a PS/2 keyboard and mouse from work. Finally got some cooperation with a PS/2 keyboard-USB mouse combo. I thought I had seen some OS installs from hell, but I swear I had Satan straddled on my shoulders on this one. I am not liking this set-up right now...feel like if I had gone with my original pick of a Gigabyte mb I would have been benching by now.

Anyway, I havent wrapped my head around this completely yet. Still have to flash these cards and check on a mb bios update. The Asus bios flash utility appears to be worthless so far. I'll keep pounding on it until I figure something out.

[DrNip]

Good info man. Don't trip. Many were tricked into these mobos with eufi's thinking they would be better. Glad I have a PS2 keyboard and mouse incase I run into this problem tonight.

[HITandRUN]

Great to see you progressing. I always use PS2 stuff since I ran into this problem before on a Gigabyte board. :thumbsup:

[Witchdoctor]

did you grab the 1053 ?

[rickss69]

did you grab the 1053 ?

According to the Asus site there are only two bios's available for this board and I have the latest. (804)

[Witchdoctor]

http://www.mediafire.com/?k1ycn0cwlgxk2yb

[rickss69]

That one isnt listed for that board WD - I would be shy about trying to flash it.

http://support.asus.com/download/download.aspx?SLanguage=en-us

[Witchdoctor]

Yea prolly right.

Found this on a BIOS list over at OCN .....

Prolly end up turning into a Deluxe or pro version ............ :laughing:

But Asus has to step up here and get a Kick ass BIOS on the street.

Their site completly blows for the record ....

Edit,

here is the sorce for the 1053

http://www.overclock.net/intel-motherboards/910402-asus-p67-series-information-thread-drivers.html

If mine is effed up I am going with it ............ :laughing:

[Neuromancer]

For the pro and deluxe the latest BIOS is 1253 not 1053. 1053 is the latest for the WS.

http://www.mediafire.com/?k1ycn0cwlgxk2yb

The are not listed on the site yet but are posted up by the ASUS tech guys :) Check out [H] they are listed there JJ and the other guy post there.

[Witchdoctor]

Cool, is it any help ?

[Neuromancer]

I am multi (and voltage) limited no matter what multi.

Cant boot over 1.525 or I get a CPU over voltage error. using offset instead of mnaul raises the limit but I still hit it sometimes as offset voltage is totally unpredictable.

+.2 voltage might be 1.475 or 1.6 depending on its mood.

[Witchdoctor]

5.2 is still a nice ride though .... diggin the sub 7 32m

are you on the 1053 or the 1253 ....

Can't wait to get started. This honey do list crap I have to deal with this weekend sucks ...

I will be installing tile instead of building my rig ......... :shock:

[Neuromancer]

I am running 1253, although I was running 5.2GHz on the 1053 as well

[rickss69]

4700MHz - I can't get cpu tweaker to open up... (Correction, 4700MHz)

[Witchdoctor]

Do I hear 5 ?

What are you cooling it with ?

[rickss69]

Using the Boreas TEC - If I can't get cpu-tweaker to run I'm wasting my time.

[Witchdoctor]

did you try lowering bclk to get more multi ?

Doesn't Asus have any program like Eleet for eVGA ?

What BIOS did you settle on ?

[Hondacity]

did you try lowering bclk to get more multi ?

Doesn't Asus have any program like Eleet for eVGA ?

What BIOS did you settle on ?

this is the counter part of rog

[Witchdoctor]

Any good ?

[Hondacity]

yes i tried that on the asus h67.....i was way over 1.5v on the vaxg(v igpu)

here a result

http://hwbot.org/community/submission/2106642_hondacity_3dmark03_gma_hd_3000_15963_marks

[Witchdoctor]

:rofl

Rock the onboard .......... :thumbsup:

[Hondacity]

i was beating subzero guys with my tweaks :D

[rickss69]

Piece of junk will not even boot into windows now, even with defaults loaded.

Edit: SSD corrupted...swapping to hdd.

[rickss69]

Anyone else getting this error trying to run cpu-tweaker?

[Hondacity]

cpu tweaker should be in the root folder..

[rickss69]

Well, let me put it this way...is anyone using Cpu-Tweaker with a P67/2600K rig?

[OC Maximus]

Sorry, haven't tried it yet.

[rickss69]

I'm almost down with you even at 4700MHz. If I could figure out how to get this thing clocked and get cpu-tweaker to work I could do some damage.

[OC Maximus]

http://i464.photobucket.com/albums/rr4/383HEMI/snaphsot0004-1.png

http://i464.photobucket.com/albums/rr4/383HEMI/snaphsot0003-1.png

I'm still working it, can't get waza to run right. Can do 6m40s with no waza.

[rickss69]

Still hung at 4700MHz...

[thebanik]

Read somewhere there is a way to make these chip like cold?? Any idea how and what is that???

[Witchdoctor]

Man that blows, Have you tried the Asus Suite.

I still don't have a cooler. This dude was supose to ship it this week but nothing yet. Should have just bought a new.

PM'd him. If I don't get a responce will be hitting the buy button on a new one soon.
Was hoping to be up this weekend to help out with this and see if this board is a POS or if something else is going on

you one the 804 or did you go with the 1053 ? hope 1253 is out soon for the Revolution.

Their was a dude on XS rthat used to make custom BIOS's for ASUS back in the day but can't remeber his name, but was night and day for my Asus P45 board

think is was Ket ??? anyone remeber this dude ???

[DrNip]

Yep he still does or at least he has been for ASRocks.

[Witchdoctor]

Kool, I will search around over there for him, and see if he has anything yet although it is early in the game with these boards

[DrNip]

Here ya go. A thread by him for BIOS mod requests. :D

http://www.xtremesystems.org/forums/showthread.php?t=253583

[Witchdoctor]

No EFI support ....... :shock:

Thansk for the help bro .......... :thumbsup:

I will see what happens, would love to get 5GHz or a bit better and hit some benchies hard, but if not the real purpose of my build is for a no holds bar prtable gaming rig. I was thinking 4.4 to 4.5 24/7 would be way awsome teamed with 2x 580's both on 16x bandwidth.

[Neuromancer]

Piece of junk will not even boot into windows now, even with defaults loaded.

Edit: SSD corrupted...swapping to hdd.

Wow that is odd.

I added a little PCH voltage to run 104 BCLK on the deluxe...

I did get some HDD corruption when mem tweaking though.

[Splave]

No EFI support ....... :shock:

Thansk for the help bro .......... :thumbsup:

I will see what happens, would love to get 5GHz or a bit better and hit some benchies hard, but if not the real purpose of my build is for a no holds bar prtable gaming rig. I was thinking 4.4 to 4.5 24/7 would be way awsome teamed with 2x 580's both on 16x bandwidth.

4.8 or so 24/7 should be cake for ya buddy!

[Neuromancer]

rick

Disable EPU in the BIOS and make sure the switch is off. If you are still getting that 16-33x in CPUZ, then set EPU to high performance.


Either in BIOS or with EVO. Even disabled you can still control it with software :S

Also.. UEFI always remembers the last settings unless you CMOS reset. Stupid design flaw. so you can set High performance.. restart, disable EPU and it should stick.

CPU core offset voltage will let you pass 1.525 volts without erroring, but again offset remembers your last voltage settings.. so if you were auto volting or manual volting at 1.4v already.. adding offset adds to that 1.4v. NOT stock VID.

Stupid stupid.

I do not have time to test cputweaker for yah right now buddy, maybe I can get back home tomorrow.

[rickss69]

I'll try that neuro - I blew out another OS this morning on a hdd. :scared:

[DrNip]

No EFI support ....... :shock:

Thansk for the help bro .......... :thumbsup:

I will see what happens, would love to get 5GHz or a bit better and hit some benchies hard, but if not the real purpose of my build is for a no holds bar prtable gaming rig. I was thinking 4.4 to 4.5 24/7 would be way awsome teamed with 2x 580's both on 16x bandwidth.

Looking for 4.5 ghz 24/7 too teamed up with a 580. Wifey had me convinced into getting a 570 but went back with the 580 thought.

[Neuromancer]

580 is nice :)

4.5 Should be real easy to get. I set mine to 4.475 for a 24/7 OC.

I went in with deliberate max voltages though 1.0v SA, 1.2v IO and 1.3v Vcore.

RAM at 2000 ish 104BCLK * 1866 multiplier.

[Witchdoctor]

1053 works bro ............ :thumbsup:

[DrNip]

580 is nice :)

4.5 Should be real easy to get. I set mine to 4.475 for a 24/7 OC.

I went in with deliberate max voltages though 1.0v SA, 1.2v IO and 1.3v Vcore.

RAM at 2000 ish 104BCLK * 1866 multiplier.

Nice! Great results too Neuro. :cool3:

[rickss69]

Another OS explosion...I can't believe I got rid of a 980X for this junk.

Btw, Jack Lalanne died today at the age of 96. :bench:

[Splave]

toast some carrot juice in his honor

hey rick you are just increasing multi right now right?

[Neuromancer]

Another OS explosion...I can't believe I got rid of a 980X for this junk.

Btw, Jack Lalanne died today at the age of 96. :bench:

Yah know its funny, I was just thinking something similar... this SB stuff is based on the same shoddy arch that 980X was.

I mean great arch... but full of failure too for overclockers. How many died here? How many lost cores? I don't recall that on previous Intel chips and just never heard of it on AMD. I killed a Q6600 though and those were tanks :)

My first 920 ran 4.65 its entire life... second ran it and beyond and then became a desktop cruiser.. so hard to say if it was a tank... I could still pull 4.7Ghz when I needed to... so yes?

My first extreme OC boot on SB was 52X... first blue screen I got when pushing BCLK... 51X was new max multi...

(I only just realized it or I would have posted it sooner)

[rickss69]

Every time I get up to 4.8GHz it seems everything gets unstable. Is there a setting that controls video somewhere like pci-e frequency? Somehow I think that is what is holding it up. Once over 4.7GHz during boot up the screen goes haywire...after that I can never get the OS to boot again.

http://i434.photobucket.com/albums/qq69/rickss69/WSRevolution001.jpg
http://i434.photobucket.com/albums/qq69/rickss69/WSRevolution002.jpg
http://i434.photobucket.com/albums/qq69/rickss69/WSRevolution003.jpg

[Hondacity]

bios settings?

[rickss69]

Uploader would not work - had to use Photobucket.

I have tried full auto to full manual on nearly all settings and still come up against this wall. I have not yet flashed the bios...I don't understand why this mb acts the way it does and don't want to flash until I understand the reason. To even try again I will have to re-install a OS. (#6 and counting)

[ocgmj]

Have you tried Load-line calibration at the low setting?

[Hondacity]

try pll 1.75v

and cpu voltage manual instead of offset and set to 1.5v

[OC Maximus]

Smack it with a hammer a few times to loosen up them jiggahurtz :taunt:

j/k

hmmmmmmmmm............

LLC "Ultra High"????

Is there a "Ludricous High" setting?

[rickss69]

I have probably tried most all those settings to no avail...can no one else do 4.9GHz with the settings I have shown?

[Hondacity]

i just booted 49x 100

4c/8t

wprime32m 8.xxx seconds

fully stable...

[rickss69]

Just flashed bios two times in a row with the Asus utility and it is still showing as 804. Seems anything related to Asus is always a pain in the ass for me. Never had any problems with Evga or Gigabyte.

[rickss69]

i just booted 49x 100

4c/8t

wprime32m 8.xxx seconds

fully stable...

Did you use the settings I have shown?

[Neuromancer]

VCCSA should help with PCIE flaking as the system agent handles PCIE/DMI/Power controller etc.

There is no separate PCIE control which is why the systems are BCLK limited.

Mysettings for 5.2GHz (everyones will be differnt and I seem to need more vcore than others) This is a little flaky.. same settings drop BCLK to 100 though and its very stable...

1st page

Manual
100
All Cores 51x
PLL OVervoltage enabled
2133 mem divider
EPU disabled
9-11-9-27-2T
CPU power management
Ratio Auto
EIST disabled
Turbo Enabled
Primary Plane Current Limit Auto (can bet set up to 1023Amps though)
LLC High/UltraHigh
VRM Manual 500 (this does not really seem to make a differnce TBH)
Phase control Extreme
Duty Control Extreme
Current 140%
1.525 manual
1.675 vdimm
1.1625 SA
1,,28 IO
1.5-2.0 PLL (Placebo effect?)
PCH 1.15
Manually set all DRAM refs to .5
Spread Spectrum disabled

pg 2
Ratio Auto
Thermal disabled
Active Cores ALL
Limit CPUID Disabled
XD Enabled (should be disabled I suppose)
VT Disabled
EIST Disbled
Turbo enabled
C1-c6 disabled

PCH-HPET Enabled

Onboard
Up to you. I have ethernet enabled and USB3... Serial port must be enabled for Bluetooth to communicate

APM All to disabled except PO by PCIE Enabled. (supposed to prevent Double boot when retrieving PCH pageS)

3rd page
Qfans disabled
Ignore CPU voltage (thanks Splig) DOH!

4th page
Numlock off (if you want it on in windowS)
Fullscreen disabled
Option ROM Keep current... (this speeds up boot as you dont get the Intel/Marvell RAID splash screens)
Setup- Advanced


At 5GHz that is very stable upping the BCLK to 102.. its 75% it boots. When it does boot it runs any benchmark...


If CPUZ is showing CPU speed as 16x, try setting EPU to low power saving mode. restarting and then disabling it and restarting again. Set High Performance in windows as well. (Obviously)

[OC Maximus]

can no one else do 4.9GHz with the settings I have shown?
With my settings yes. But I'm on a gigabyte board which does a few things differently.

[Neuromancer]

Clear CMOS helps too with BIOS issues. The UEFI seems to like remembering old settings.

[Neuromancer]

I have probably tried most all those settings to no avail...can no one else do 4.9GHz with the settings I have shown?

Just booted those settings at 4.7 with LLC to AUTO and less core trying 4.9

I have a 2500K though...

wPrime 1024 is running now at your setting minus some vcore and lower LLC.

Is running warm though at 52-54C missing that arctic snap we had :(


If you cant update the BIOS I would say that is the BIG issue right there.

Return it and get a GB board :)

EDIT: Crashed wPrime with a x101 (too low a vcore, more likely too low a LLC)

[Hondacity]

i forgot....

[rickss69]

I'll try those settings this evening Neuro thanks - If I can't get it going still I will take a hammer to it for sure. Off to work...

[rickss69]

i forgot....

Well I can see right there you didnt use my settings...thanks for the effort.

[Hondacity]

bios version?

[Hondacity]

i copied your settings

[thebanik]

Another OS explosion...I can't believe I got rid of a 980X for this junk.



Agreed those 5.5G threads/submissions made my head swirl, dunno how many chips have to be gone through to get chips of those caliber.

Mine is stuck same as OCM at 5.2X Ghz. Nothing I do is helping it further. Worst is that the feeling that even putting LN2 wont help in getting more clocks out of the setup, :(

[rickss69]

If I could just see a stable 5GHz I would call it even at this point.

[Hondacity]

what are your temps?

[rickss69]

Not much...I figure if everyone is doing it with air or water surely my Boreas TEC can foot the bill. It held the 980X up to 4.7GHz benching.

[Hondacity]

how many remounts?

[rickss69]

Even with no thermal paste it will wipe the floor with any wc set-up lol...temps are not the issue here I am sure.

[Hondacity]

update the bios... to 1253

[thebanik]

update the bios... to 1253

+1, on the GB board, I was trying to OC on stock bios and was failing miserably. Only after I updated it to the latest (tried a few in between) was I able to reach my current clocks.

[Witchdoctor]

update the bios... to 1253

Can't find it for the Revolution.

Link a brother up ........ :thumbsup:

1053 is what I am on now.

Just got my new 580 and holding out for eVga to get one in stock so I can swoop on the free 3D11 .....

Waiting on my RAM to get in from RMA, I will be working some single channle this week end. I will let you know how I make out Rick.

see if this board is just a POS or if your CPU is a dud ...

[DrNip]

Ya'll are lucky. The pro micro is still on the initial release bios. :(

Also if I disable EIST on the micro i can't clock the mult past 34 in EUFI or windows. It takes away the option for turbo mode, turbo ratio, and by all cores. WTF? So I get into windows and my cpu is constantly down clocking!!!! Only work around I see is there is an adjustment for it to stay at max clock in bios from 1 to 32 seconds and I adjust it to 32 seconds. After 32 seconds it drops multi to 16.

[Witchdoctor]

:ohcrap:

I have not played with it yet, but thanks for the tip. Prolly the same on my board, unless it has been addressed in the 1053 BIOS

I have just hit the auto clocking for the fun of it to see where it lands

4.533 using that. Will be playing with it a bit this weekend though.

Just wish I had my stix :shock:

[DrNip]

Wait a minute, wait a damn minute. Just went to power management in control panel, set it to high performance and wammo. Problem fixed. Max multi at all times with EIST enabled. Now I feel better in life. Was wondering how I was going to bench with cpu down clocking. Now just waiting on better cooling and I should be off to the races. :D

[Witchdoctor]

Kool ........... :thumbsup:

Rip it up Doc

[DrNip]

Thanks for the linky to the 414 BIOS. Asus still only has the 404 on their website.

[69_Goat]

If you're looking for a bios, check this link.

http://hwbot.org/forum/showthread.php?t=15952

[DrNip]

If you're looking for a bios, check this link.

http://hwbot.org/forum/showthread.php?t=15952

Here is the link Witchdoctor hooked me up with for Asus P67 mobos. Not only does it have BIOS's but all the rest of your current drivers.

http://www.overclock.net/intel-motherboards/910402-asus-p67-series-information-thread-drivers.html

[rickss69]

This is just maddening...I still have been unable to flash the bios on this board by an means.

[rickss69]

Jesus! Asus can kiss my Assus! Finally managed to load bios 1007...still seems flakey tho.

[Witchdoctor]

I have not seen that BIOS for this board ?

is it on their site, I have 1053

How are yo flashing it ? b oot or software

Installed the AI suite and flashed it with that. Flawless

Sounds like something be effed up there ???

5 Ghz FTW ............... :thumbsup:

[thebanik]

Congos Rick, you finally managed 5G, :P. Is that the volt you require for 5G or you are just testing still and overvolting it??? Would be waiting for new Bios, if that doesnt improve the clocks, I am gonna dump 2600K and get back to x58 platform. Though it does seem like a good platform for hardware/video card grinders for boints.

[rickss69]

Without a clue atm...I have work to do.

[rickss69]

Points to be made if I can get these cards flashed.

[Witchdoctor]

Nice,

Clocking down ? turning off all the power savings crap does not help ?

[DrNip]

This is just maddening...I still have been unable to flash the bios on this board by an means.

That's strange because Asus has always been the easiest mobo for me to flash. :Dizzy:

Very nice though. At least your chip can do 53 multi. Maybe even more once you get the wrinkles ironed out. :thumbsup:

[rickss69]

I'll put you my bios screens up before I leave for work Brian.

[thebanik]

awesome news there Ricks, so you havent got a dud of a CPU, :P, But its so frustrating to know that, whatever you do from this point onwards it wont improve your clocks other than maybe Bios update.

[rickss69]

I am just starting fresh here so all is a mystery. These were the settings from the two bench's posted.

[Neuromancer]

Wait a minute, wait a damn minute. Just went to power management in control panel, set it to high performance and wammo. Problem fixed. Max multi at all times with EIST enabled. Now I feel better in life. Was wondering how I was going to bench with cpu down clocking. Now just waiting on better cooling and I should be off to the races. :D

Yeah I have been saying that. Shit seems to do whatever it wants. I have EPU disabled still have to load up the software in windows and force it to High Performance :S

Glad you are finally pushing the 5+ GHz mark :)

[DrNip]

Coolit ECO water cooler shows up today but new fans prolly not until Monday or Tuesday. Damn snail mail. Going to have to strip the whole computer back down just for install. Damn hurry up and wait game got me again! Was reading a post at some foreign forum of a guy with same batch as me. He was hitting 5.3ghz. Hope I'm that lucky at least. Can't wait to get this going to see if the micro atx can hang with the atx.

[Hondacity]

1253

http://91.121.148.119/downloads/BIOS/P8P67-WS-REVOLUTION-ASUS-1253.rom

[Witchdoctor]

1253

http://91.121.148.119/downloads/BIOS/P8P67-WS-REVOLUTION-ASUS-1253.rom


Your be the man Honda .......... :thumbsup:

will be flashing to this weekend

Where is my thumb drive ???

DOE

[Hondacity]

it took them awhile to effin release it...

its stable as nuclear power plants...

not sure if you'll have 3d01 err ..when displaying details..haven't tried 3d01 yet

[rickss69]

5.3GHz is bootable but not stable enough to bench yet. I must start experimenting with these settings.

I'm just going to gloss over 3D benchs until I mod the cards. Hoping to be able to get Tai Server loaded for 2D and see what I can do with it this w-end.

[DrNip]

Here is RealTemp 3.67 from UncleWebb. It is compatible with SB.

http://www.xtremesystems.org/forums/showpost.php?p=4718998&postcount=4324

Is your CPU down clocking or just misreading in cpuz? If down clocking set your performance to high in the control panel.

[rickss69]

Thanks Nip - It is kinda flakey displaying the frequency...of course speedstep is enabled because that is the only way overclocking options will show up in bios. This is a strange bird for sure and nothing works as it should in or out of bios.

I'm going to have to call kiki shortly to try to get this Tai Server installed...

[Neuromancer]

Yeah ASUS screwed the pooch on UEFI I think.

On one hand... UEFI will be great once we get more tools that take advantage of it. On the other hand if everyone does not implement it now we won't get those usefool tools. *sigh.

[Witchdoctor]

Think I like just the standard BIOS

Been working with it so long it only takes a few seconds to set up

I guess I will get used to this though,

Just need to get XP installed on this POS

[rickss69]

Without the use of CPUTweaker for SPI 32M I might as well be running a 3D bench. Maybe kiki will be able to help me with Tai Server this evening and I can dip into the 5's...


http://i434.photobucket.com/albums/qq69/rickss69/SPI_32M.jpg

[Witchdoctor]

Nice ,,,, looks like you are working it out bro

Welcome to the Revolution .......... :laughing:

[rickss69]

I will not be denied in SuperPi... :D

[rickss69]

No tweaks...if I get off my ass I can pick up a cup in '01. (Details will not open for me)

[Hondacity]

pos...lmao

[rickss69]

It truly is a pos...I'm afraid to make a game rig out of it for fear of losing all my data. It tears more shit up than it gains. I have to email myself each run to save the screenshot...the OS or hdd is liable to blow up without any warning.

[rickss69]

Meh...

[Witchdoctor]

Work it bro

I still can't get the freaking down clocking to turn off :Dizzy:

[Splave]

hey rick it wont boot x53?

[rickss69]

Work it bro

I still can't get the freaking down clocking to turn off :Dizzy:

You won't be able to Brian.

[rickss69]

Work it bro

I still can't get the freaking down clocking to turn off :Dizzy:

You won't be able to Brian.

hey rick it wont boot x53?

Boot yes - Bench no.

[rickss69]

Lol! Silver cup...:taunt:

[Witchdoctor]

gotta love that,

This could be an epic grinding chip

grats on the hardware ............. :thumbsup:

[OC Maximus]

Your rams are flying in the spi32m run. Mine are still stuck at 1866mhz pullhair

[Hondacity]

asus :)

gigabyte release a new bios...with better ram compatibility

[rickss69]

With no luck getting past 5.3GHz with two different cpu's/mb's I think I shall forgo the rma and just put one of these in the gamer and call it done. Maybe later I can buy a known good chip from one of the members.

[Splave]

2 at 5.3 is nice though man, mine where 5150 5200 5287

[kikicoco1334]

i was just wondering...
i been looking on the bot and why is there only like a VERY few people is putting there CPU under LN2?
wouldn't that help with the clocking?

[Splave]

Alot of them dont respond to cold and are actually worse kiki, most on ln2 or phase etc are to try to lower voltage to keep the chip alive longer

[kikicoco1334]

Alot of them dont respond to cold and are actually worse kiki, most on ln2 or phase etc are to try to lower voltage to keep the chip alive longer

hmm... that's really different!
i was really hopping some LN2 action going on with the new chip :laughing:
thanks splave! :thumbsup:

[rickss69]

Intel 2600K back on site at the Egg - I don't know why they pulled them in the first place.

[Splave]

goodluck buyers!

[OC Maximus]

Needs to get me a #3..........

[kikicoco1334]

aren't you guys losing a lotta of money like this?
buy chips1 chip2 and chip3 or are you guys just returning it and RMAing it?

[rickss69]

I've bought two and still have them both. Not buying another unless it has seen 5.5GHz or above.

[kikicoco1334]

I've bought two and still have them both. Not buying another unless it has seen 5.5GHz or above.
smart man...

wait! 2 at the sametime?!@ :blink:

btw is snowing at the boro yet?

[Splave]

I have 4 sitting here :D

1 goes back to the egg tomorrow, the other goes to tigerdirect :D full refunds ftw
Intels fuckup makes things easy on us

[DrNip]

Intel 2600K back on site at the Egg - I don't know why they pulled them in the first place.

I checked and it shows it to be deactivated?

[kikicoco1334]

I have 4 sitting here :D

1 goes back to the egg tomorrow, the other goes to tigerdirect :D full refunds ftw
Intels fuckup makes things easy on us


NICE! :thumbsup: