March Madness 2011

[Kal-EL]

Bench Bench Bench! in the name of Splave! :thumbsup:

[Splave]

http://images2.memegenerator.net/ImageMacro/5026729/cant-stop-wont-stop.jpg?imageSize=Medium&generatorName=Foul-Bachelor-Frog

[Jor-El]

^^^

[Splave]

tried 2nd chip and its my best yet
http://valid.canardpc.com/show_oc.php?id=1688473

i'll try it on phase then sell these off... not a bad set though 1 did 5587 other did 5677


Sorry for win7x64 pf run :X my XP doesnt work with TurboV as its my x58 install...reinstalling right now

Enough to take back 5th though ftw!

[Witchdoctor]

sick .

glad to see you got a hot rod after as many as you have had.

You have like a bubble gum machine full of those things ................ :laughing:

[Neuromancer]

Sorry for win7x64 pf run :X my XP doesnt work with TurboV as its my x58 install...reinstalling right now

Enough to take back 5th though ftw!

Did you install Intel ME drivers?

Got some cheap bointers at my house :) I am not home though :(

[Splave]

yeah but I have OCstation drivers etc that mess it up :X re running pifastR faster rofl!
Jesus, you need dotnet FX 3.5 as well....250mb later :(

[OC Maximus]

Popped my AM3 400k cherry today. Much work still to be done.......

[Splave]

^ awesomeness

shaved a little with new OS :) Try to bring my ram up tomorrow but think Im near max for 6-9-6

[thebanik]

Awesome work OCM, and congrats on 5th rank splave.

Can any1 let me know what difference would 2 x 1GB would make when compared to 2 x 2GB for 3D benches???

[OC Maximus]

Awesome work OCM

Thanks bro, I'm having a blast :D

[OC Maximus]

Geforce GTX580 vgpu mod on H20
2600k @ 5.32GHz on H20

3DMark Vantage - Performance - 33125 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @990/1203MHz) 14.8 + 1.7 points
3DMark06 - 38433 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @930/1150MHz) 15.4 points
3DMark05 - 48372 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @930/1150MHz) 9.8 + 0.1 points
3DMark03 - 132106 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @970/1150MHz) 16 + 2.7 points
3DMark2001 SE - 115076 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @1001/1150MHz) 15.9 + 1.5 points
Aquamark - 401186 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @980/1150MHz) 8.6 + 0.1 points
Unigine Heaven - Xtreme Preset (DX11) - 1713.96 DX11 Marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @980/1203MHz) 11.5 + 0.1 points

Wow! Global FTW! Although I need to freeze this card to compete with the best it sure helped my global point deficient ass, lmao. My motivation to get a gpu pot now has gone through the roof. Great card to overclock. FPS were much higher than I'm use to, lol. Wow!

Will bench again for sure, need a pot :thumbsup:

[thebanik]

Geforce GTX580 vgpu mod on H20
2600k @ 5.32GHz on H20

3DMark Vantage - Performance - 33125 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @990/1203MHz) 14.8 + 1.7 points
3DMark06 - 38433 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @930/1150MHz) 15.4 points
3DMark05 - 48372 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @930/1150MHz) 9.8 + 0.1 points
3DMark03 - 132106 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @970/1150MHz) 16 + 2.7 points
3DMark2001 SE - 115076 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @1001/1150MHz) 15.9 + 1.5 points
Aquamark - 401186 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @980/1150MHz) 8.6 + 0.1 points
Unigine Heaven - Xtreme Preset (DX11) - 1713.96 DX11 Marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @980/1203MHz) 11.5 + 0.1 points

Wow! Global FTW! Although I need to freeze this card to compete with the best it sure helped my global point deficient ass, lmao. My motivation to get a gpu pot now has gone through the roof. Great card to overclock. FPS were much higher than I'm use to, lol. Wow!

Will bench again for sure, need a pot :thumbsup:

Damn nice OCM, arent you trying to get a better CPU as well???? A chip in the range of 5.5Ghz would get the scores through the roof with a GPU on Dice/LN2

[Splave]

I sold him my 5.58 chip ;) I though it would be good for the team. He should have it by the end of the week

[Splave]

2 more 2600ks comming........ :X must have 5.7+ also ordered the BBSE ripjaws kit for p67 see how that turns out

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231450

kudos to witchie for the mem coupon code

[crio]

GTX275 Lightning Found and Baught fellas....I am so excited....:D:D

The goal now is 130+ 3Dmark2001 SE....

Wish me luck....


Splave man you are on fire....Go go go...

(kal i got a surprise for you later tonight)


Edit :

VGA is capable of this with Ceramique

http://www.hwbox.gr/images/imagehosting/4824d6fc24ba9abf.png

[kikicoco1334]

(kal i got a surprise for you later tonight)

i wanna make this so dirty right now :rofl

[Kal-EL]

Hehehehehe, ME LIKES SUPRISES! :D

[Chuchnit]

Uh oh crio gonna do some damage.... Good luck man.

[DrNip]

Popped my AM3 400k cherry today. Much work still to be done.......

Damn default GPU clock of 17928! ROFL

Going to have to see if i can pop mine this month as well.

[thebanik]

I sold him my 5.58 chip ;) I though it would be good for the team. He should have it by the end of the week

Nice, so more Global boints coming OCM's way, :thumbsup:

You gotta help me get that board Allen, me wants some global which can stay up for atleast a few months, :D

[kikicoco1334]

i was talking to ocm last night lol the man can't wait

[OC Maximus]

I check the mail ten times a day if thats any indication :D

[Splave]

Am I wrong? tell me if I am
http://hwbot.org/forum/showthread.php?t=21234

[DOM]

no not imo like the ones with the gig oc mb also like u had to wait i think they should also

but since that never made it to the market i say no points also ;)

[OC Maximus]

So say we all.

[Splave]

I guess Im the only one over there that thinks so. Maybe I should make a poll...Im not being a dick but come on. even if it was $500 to buy one I would but I cant even do that. I was told when its on newegg I could submit the x5687 scores....xpander is not on newegg nor is the RIIIE black or gigabyte OC board....Seems it depends on who does it :X and im not important enough to be on that list.

[Neuromancer]

Awesome work OCM, and congrats on 5th rank splave.

Can any1 let me know what difference would 2 x 1GB would make when compared to 2 x 2GB for 3D benches???

I generally run 1GB modules for benching as it is the only way I can afford good sticks. 2GB modules seem to be better though.

Technically, maybe 2GB modules saturate the bandwidth better

Economically, maybe because companies develop sets that people will buy for 24/7 use more?

Just guesses though.

[Neuromancer]

Am I wrong? tell me if I am
http://hwbot.org/forum/showthread.php?t=21234

I commented it. Very succinct for me too :)

[Patch]

Am I wrong? tell me if I am
http://hwbot.org/forum/showthread.php?t=21234

So say we all.

I guess Im the only one over there that thinks so. Maybe I should make a poll...Im not being a dick but come on. even if it was $500 to buy one I would but I cant even do that. I was told when its on newegg I could submit the x5687 scores....xpander is not on newegg nor is the RIIIE black or gigabyte OC board....Seems it depends on who does it :X and im not important enough to be on that list.

A few guys get to game the system without breaking the rules.

We know it. They know it.

While I think to be scored hardware must be available for purchase SOMEWHERE, I don't think it's practical for the bot to try to determine how retail retail is. Drawing the line would be impossible. Especially when our brothers from India and South America chime in on the issue.

[Kal-EL]

Chew has an expander, maybe he'll let you guys borrow it ;)

[Splave]

hahaha

[Splave]

back to benching enough BS lately :) my fault!

Alright this ram is epic, 6-8-7-24 2133 boots at 1.7v :X not stable but... Even 7-8-7 will be nice for 32m

[Kal-EL]

Naw man, its all my fault with my excessive negativity towards scared sore pussys. I really should watch what I don't say around the other forums, its somehow turning into something else.

Guess people get scared when new blood is in the water, they might have to share their happy meals or sumtin, dunno.

[Splave]

benching 03 :) passed 1600/1300 ftw, going for more as we speak

EDIT: pitcher was empty at 59s in to gt4 rofl, foze 59.99 then spit out bad score lol oops. running again now with 2 pitchers ready

[Kal-EL]

LOL, nub :P

[Patch]

LOL, nub :P

Lemme know if you need some tips on how to pour one pot through a bench.

[Splave]

Think I figured it out guys ;) mah mah mah monster card card card

Rofl just enough boints to leap frog stummerwinter again

Fastest card clocks on the bot! Just need a 5.8 sandy now...

[crio]

Splavezowner RULEZZZZZZZZZZZZZZZZZZZZZZZZZZZZ

[Chuchnit]

Woot Splavezowner! Rip it up mang.

[Splave]

SPZ ! lol thnx men

[Witchdoctor]

Splavezowner RULEZZZZZZZZZZZZZZZZZZZZZZZZZZZZ

+1

Aip619LJMDo&feature=related

[Neuromancer]

Nice Allen,

Since you are running 100 FSB even, than you are not limited by the 99.5 nonsense... any chance of maybe running 55X and 102 bus?

That will increase all bus speed, including PCIE...

[Bones]

Damn Splave - Just running along, kicking azz and all that....... You'll get the next spot before long. :thumbsup:

[Splave]

Nice Allen,

Since you are running 100 FSB even, than you are not limited by the 99.5 nonsense... any chance of maybe running 55X and 102 bus?

That will increase all bus speed, including PCIE...

It started to get funny at 101x56 so I just kicked it back to 100 but yes I do need more cpu speed!

Thanks bones!

Just had a nice fail session in 06, SM3.0 scores were really bad. Using my other card without PLL mod...It really needs it bad to accept more coldage. :X


FINALLY 2K HW BOINTS w00t OCA FTW

[Chuchnit]

^ killer man.

[Kal-EL]

My niggah! :cool3:

[OC Maximus]

Splave, I'm speechless :shock:

[Neuromancer]

It started to get funny at 101x56 so I just kicked it back to 100 but yes I do need more cpu speed!

Thanks bones!

Just had a nice fail session in 06, SM3.0 scores were really bad. Using my other card without PLL mod...It really needs it bad to accept more coldage. :X


FINALLY 2K HW BOINTS w00t OCA FTW

you are complaining.

LOL

Stop being the man for a while okay :Hi:

Word to the muthfutha gee:)

1600+ on a 580 is pure sickness!

Grats!
BTW I was not saying up bus for more CPU speed. Talking more bus for more bus sake :) PCIE, QPI, LSD, Lady Gaga whateber :)

EDIT: unless you sitting on a better score ;)

[crio]

Well done on reaching No5 again bro..
4699

[DrNip]

you are complaining.

LOL

Stop being the man for a while okay :Hi:

Word to the muthfutha gee:)

1600+ on a 580 is pure sickness!

Grats!
BTW I was not saying up bus for more CPU speed. Talking more bus for more bus sake :) PCIE, QPI, LSD, Lady Gaga whateber :)

EDIT: unless you sitting on a better score ;)

Yeah, his fail sauce sessions would be win for the rest of us! lol

[Patch]

On air, the new 990x boots into Windows at 4.8 Ghz with 1.375vcore with a mild QPI bump and ram at 1.65v, but takes 1.49v to boot at 5 Ghz.

No idea if that's good because I've never tried one on air before.......

[Witchdoctor]

Pretty sick on air,

Some preperation for Global domination ,,,,,,,,,,,, :thumbsup:

[Neuromancer]

On air, the new 990x boots into Windows at 4.8 Ghz with 1.375vcore with a mild QPI bump and ram at 1.65v, but takes 1.49v to boot at 5 Ghz.

No idea if that's good because I've never tried one on air before.......

Hmm thats pretty much what Sandy Bridge does too. Interesting...

[Kal-EL]

On air, the new 990x boots into Windows at 4.8 Ghz with 1.375vcore with a mild QPI bump and ram at 1.65v, but takes 1.49v to boot at 5 Ghz.

No idea if that's good because I've never tried one on air before.......

Interesting Patch, are you gonna be doing much testing on air or you headed for frostland soon?

I bet its a temperature scaler.

[Splave]

Yuck time to start binning 990's :X Total CPU bottleneck in game tests GT1 and GT2 at 190x33 then 184x33 for CPU and GT3 GT4 (kept freezing in GT3 and GT4 randomly at 190x33) I really dont like 06 lol I will stick to the others for now. Going to Try sandybridge SLI in 03 tonight :thumbsup:

[Witchdoctor]

6Ghz, Things could be a lot worse ..... :ohcrap:

That's dam nice as a matter of fact .................................................. ..... :thumbsup:

[Patch]

Splavezoner, you'll be binning for a looooong time to get a 6.2 ghz+ 3D06 CPU test chip. Since you can't go back up to 190X33 for GT3 or GT4, are you staying at 184X33 for convenience after the CPU tests? Should still be able to bump up base clock at least a little for the last 2 graphics.

@Kal: Hope it scales with temps and voltage.....
Gonna dink around on air for a while and try to figure out why my efficiency sucks hairy ones in everything lately.

[Splave]

Patch the new strategy seems to be not using HT in order run games test higher. IE 6.5ghz whole test. The cpu is not strong enough to climb back to 190 for the last 2 test. Tried it twice and failed both times. Left it at 184 and passes no issues.

[GeorgeStorm]

I think patch was suggesting trying 186 or something similar for the last 2, get a bit more cpu speed back.

[OC Maximus]

Damn default GPU clock of 17928! ROFL

Wow, how did I miss that :laughing:

Kept getting 398, 399, and 400 but fudged the screen shot due to system freeze. Dropped the bclk by .1 and popped a 401k :D

[thebanik]

Going to Intel Distributor to test atleast 20 2600K's that have landed for my city. I hope atleast 1 of them can do 56 multi. Keeping my fingers crossed.

[thebanik]

Duplicate Post

[Neuromancer]

GL Banik!

[OC Maximus]

Going to Intel Distributor to test atleast 20 2600K's that have landed for my city. I hope atleast 1 of them can do 56 multi. Keeping my fingers crossed.

Outstanding Bro Mang!! Hope you get a 59x chip :D

[DOM]

Going to Intel Distributor to test atleast 20 2600K's that have landed for my city. I hope atleast 1 of them can do 56 multi. Keeping my fingers crossed.

Outstanding bro mang!! Hope you a 59x chip :D
70X OR KILL THEM ALL :laughing:

[OC Maximus]

70X OR KILL THEM ALL :laughing:

Don't hate on SB :D

.
.
.

:P

[DOM]

Don't hate on SB :D

.
.
.

:P
WISH I HAD THE CASH FOR SB :blush:

[Kal-EL]

Good luck Banik :D

[thebanik]

Thanks a lot guyz, looks like I am the most stupid guy in the world. I got a whole lot to test, http://img135.**********.us/f/p3080106.jpg/, but was still not able to pick a winner.

Best I have been able to get is 5450. Though while testing and even now, it doesnt get stuck with Post Error Code '4E' for multi even up to 57(with 99.5 Bclk, only 54 multi with 100.2 Bclk) but cannot go into windows vista/7. So I am hoping disabling cores or putting it under DICE/LN2 might do the trick, but the types of weird and varied errors I am getting above 54 multi seems to me that the CPU is not upto the task.

[Splave]

blinking command prompt?

[thebanik]

blinking command prompt?

blinking command prompt is to Asus as 4E code is to Gigabyte.

So I can get past 4E = blinking command prompt even at 99.5 x 57 multi (hence I thought I had a winner when I was testing at distri's place)

But now once I got home and started testing the chip, the problematic symptom is that, I can boot properly into Windows only at 99.5 x 55 or 100.2 x 54(with this Bclk I get 4E or the blinking cursor with 55 multi).

[Splave]

2 more sandy bitches L045B005's 0331 and 4328...from tiger cause I get down like that

[Witchdoctor]

Awsome suace bro ........ :thumbsup:

Got mine today, and checking the sites evey 30 minutes for a UD7 or M4E ..... :laughing:

Anyone out there see either of these boards retail, please hit me with a PM

[Kal-EL]

2 more sandy bitches L045B005's 0331 and 4328...from tiger cause I get down like that

The leader of the Retail Army has spoken, all hail splavezoner :morpheus:
(no knob-ware or suckle-ware were used during this post)

[Chuchnit]

The leader of the Retail Army has spoken, all hail splavezoner :morpheus:
(no knob-ware or suckle-ware were used during this post)

No suckles? :laughing: Hoping you found a x58 err I mean x59 chip Splave. :good:

[Splave]

0331 does 5475....4328 does 5250 shiot

[OC Maximus]

0331 does 5475....4328 does 5250 shiot
pullhair

[Splave]

2 more maybe? ;) NEVER GIVEEE UP

http://media.ebaumsworld.com/picture/krail969/SandyVagina.png

[OC Maximus]

LMAO!!! :laughing:

[thebanik]

So the chip it seems can do 5.5Ghz,http://hwbot.org/community/submission/2137823_

but not able to figure out the chip at all. Some of the SB chips IMC is so bad that it cannot handle 2 sticks after a certain CPU speed???, even when they are running at like 1333Mhz??? Have tried Vtt upto 1.36V, and System Agent upto 0.975. I am ready to pull out my hair at this point, air overclocking seems more difficult than LN2 overclocking at the moment to me. No point in having a chip which cannot clock memory.

[Kal-EL]

Ack, that sucks banik, I haven't touched this platform yet maybe splave has some hints?

[Splave]

So the chip it seems can do 5.5Ghz,http://hwbot.org/community/submission/2137823_

but not able to figure out the chip at all. Some of the SB chips IMC is so bad that it cannot handle 2 sticks after a certain CPU speed???, even when they are running at like 1333Mhz??? Have tried Vtt upto 1.36V, and System Agent upto 0.975. I am ready to pull out my hair at this point, air overclocking seems more difficult than LN2 overclocking at the moment to me. No point in having a chip which cannot clock memory.

not that I have seen, sandy bridge IMC is amazing. you are at 6-6-6 900+ and calling it bad IMC?!$@#? Use 2133 and 7-7-7 is faster though. Def need dual channel, maybe you have a bad stick or the board doesn't like 1gb sticks of hyper

my settings for binning

1.575vCore
0.875vCCSA
1.1875vCCIO
1.7vDIMM
1.15vPCH

Starting at 52, increase multi by 1 and boot. Hit a wall and increase vCore, still walled, decrease bclk...then throw it in the garbage with the 20 other chips suck ballz

[thebanik]

not that I have seen, sandy bridge IMC is amazing. you are at 6-6-6 900+ and calling it bad IMC?!$@#? Use 2133 and 7-7-7 is faster though. Def need dual channel, maybe you have a bad stick or the board doesn't like 1gb sticks of hyper

my settings for binning

1.575vCore
0.875vCCSA
1.1875vCCIO
1.7vDIMM
1.15vPCH

Starting at 52, increase multi by 1 and boot. Hit a wall and increase vCore, still walled, decrease bclk...then throw it in the garbage with the 20 other chips suck ballz

Looks like 2 of my mobo pins got bent which was causing all kind of different problems. Got fed up and opened up the setup, and have tried bending them straight, looks ok to me now. Setup is behaving the way its supposed to be now.

[Splave]

binning some 7600gt's rofl! I found that I have 3 of them wtf? didnt know I had 1

[Witchdoctor]

Cleaning out the closets FTW ......... :thumbsup:


Just hit the buy button on a M4E ....

Impacience got the best of me, so I gave up a bit of PCIe bandwidth :ohcrap:

[Splave]

shammy backed board gotta be win

[OC Maximus]

Just hit the buy button on a M4E ....

Thats awesome news! :thumbsup:

[DOM]

where did u find the M4E ?

so is the ud7 the only one with two x16 pci-e with 2 cards ?

[Splave]

yes but lose 2d performance with nf200

[OC Maximus]

UD5 FTMFW ;)

[DOM]

im not really a fan of 2d but dont run dual cards that much also :(

but wifes going to kill me if i get sb cuz only ways is to add it on my newegg account that i just payed off :P

and babys due next month :scared:

[OC Maximus]

Get SB

Enough said

:P

[Splave]

modded all 3 7600gt's last night rofl! wtf right? :D

Also played a bit with my new G.skill 8 9 8 2133 kit and it does nicely 984 6-8-6-24 at 105x48. Wonder if thats faster then 6-9-6-24 2133 in 32m?

[DOM]

splave wut mb u using on 1155 ?

neweggs got some in but idk crap about sb lol

[Splave]

p8p67 deluxe, if I could do over would get a ud5 or MIVE

[DOM]

thats not wut i wanted to hear :laughing:

i was going to get that one cuz m4e is way to much imo

and theres no ud5 that i saw

[Splave]

if you p8p67 just get the evo or pro they all clock the same

[DOM]

but none like STT hypers right ?

hc said that the m4e has a bios for hypers that shammy released :P

[Witchdoctor]

Don't know, but I can try it out when mine gets here.



Just reading if you populate slot 1 with a sound card or what ever slots 3 & 5 will run at 16x each, can anyone confirm this ???

[DOM]

Don't know, but I can try it out when mine gets here.



Just reading if you populate slot 1 with a sound card or what ever slots 3 & 5 will run at 16x each, can anyone confirm this ???
think your the only one with a m4e :P

[Splave]

fail session, sli at 1300/1325 in vantage....runs half way through gt1 and kicks my breaker every time lol. Guess I gotta take it over to the office :X

[DOM]

fail session, sli at 1300/1325 in vantage....runs half way through gt1 and kicks my breaker every time lol. Guess I gotta take it over to the office :X
or put in a bigger breaker :laughing:

[OC Maximus]

Sub 6 or bust!

Couldn't get waza to run without erroring out. :argh:

So here is my no waza run in normal mode on winFLP

SuperPi 32m - 6min 3sec 616ms - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5534MHz) 19 + 13.7 points

[kikicoco1334]

i should have a few boints coming in tho lol
been benching 6pm tennessee time and now it's been 1:32 am

[kikicoco1334]

well here is how this night went...
i started benchin 6pm and now it's prob sometime aroud 2 now?
and only got 12 boints out of it

http://hwbot.org/community/submission/2139271_kikicoco1334_cpu_z_core_2_e6600_2.4ghz_460 4.94_mhz?new=true

[OC Maximus]

^^^Great job Tu^^^


Well, no sub 6min spi32m tonight. Keep getting "not exact in round" if I waza. So I'm gonna call it quits before I kill her. Still can't drop tRCD to 9. Maybe a new set of sticks are in order, we will see.

Rig shut down, she lives to fight another day ;)

SuperPi 32m - 6min 0sec 531ms - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5587MHz) 22.7 + 15.4 points
SuperPi - 6sec 625ms - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5587MHz) 10.3 + 13.8 points
PiFast - 13.16 sec - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5594MHz) 18.8 + 10.3 points
CPU-Z - 5598 mhz - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5598MHz) 5.1 points

Thanks for the great chip Splaveman :thumbsup:

[kikicoco1334]

^^^Great job Tu^^^


Well, no sub 6min spi32m tonight. Keep getting "not exact in round" if I waza. So I'm gonna call it quits before I kill her. Still can't drop tRCD to 9. Maybe a new set of sticks are in order, we will see.

Rig shut down, she lives to fight another day ;)

SuperPi 32m - 6min 0sec 531ms - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5587MHz) 22.7 + 15.4 points
SuperPi - 6sec 625ms - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5587MHz) 10.3 + 13.8 points
PiFast - 13.16 sec - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5594MHz) 18.8 + 10.3 points
CPU-Z - 5598 mhz - OC Maximus (OCAlliance) - (Intel Core i7 2600K @5598MHz) 5.1 points

Thanks for the great chip Splaveman :thumbsup:
good work bro!

[thebanik]

Hey ocm/splave, need help man, how much Vtt are you guyz passing through the chip. i am not able to clock my rams much. they can do 1000 CL7-7(on the same mobo, different chip) but right now cannot do above 930 CL 8-8. passing 1.36vtt and 1.7V dram. should I bump vtt to 1.45V range???

[OC Maximus]

I'm using 1.24 qpi/vtt and 1.76 vdimm.

[Kal-EL]

@ocm, you finding better times with FLP?

[thebanik]

I'm using 1.24 qpi/vtt and 1.76 vdimm.

Yeah I was using only 1.2 qpi earlier, but bumped qpi and system agent up hoping it will help but with 2 sticks i am simply not able to clock up, maybe its still due to bent pins, :(

[OC Maximus]

@ocm, you finding better times with FLP?
Better than xplite. I've never tried the Tai Server.

Yeah I was using only 1.2 qpi earlier, but bumped qpi and system agent up hoping it will help but with 2 sticks i am simply not able to clock up, maybe its still due to bent pins, :(
Also, I'm now undervolting system agent and pll. Hope that helps ;)

[kikicoco1334]

new score guys...
http://hwbot.org/community/submission/2139313_

CPU-Z - 7286.49 mhz - kikicoco1334 (OCAlliance) (http://hwbot.org/community/submission/2139313_kikicoco1334_cpu_z_celeron_lga775_352_7286 .49_mhz) - (Intel Celeron LGA775 352 @7286.5MHz)
15 + 6.3 points (http://hwbot.org/rankings/overclocker/) http://hwbot.org/img/icons/comment.png (http://hwbot.org/forum/newthread.php?do=newthread&f=21&tag=result_2139313&subject=kikicoco1334+-+Celeron+LGA775+352+%40+7286.5MHz+-+7286.49+mhz+CPU-Z)

i am still in the cb right now but i'll try kick in to the 100th before the sun comes up

i been benching for a long ass time now and yeah...

[Witchdoctor]

WoW that awsome Kiki .......

Rick Congrats breaking 1K ........... :clapping:

:ola:

[Kal-EL]

Holy Hell, Rickster cracked the coveted 1K boint barrier!!!!
Congrats Homie :D
I gotta find a nice 1K boint badge for all our 1K guys to wear under their usernames ;)

[Splave]

Hey ocm/splave, need help man, how much Vtt are you guyz passing through the chip. i am not able to clock my rams much. they can do 1000 CL7-7(on the same mobo, different chip) but right now cannot do above 930 CL 8-8. passing 1.36vtt and 1.7V dram. should I bump vtt to 1.45V range???

wtf?!@$? 1.36vtt? that will kill chips :x

I use 1.15v :eek: then again im not using hypers.

[kikicoco1334]

CPU-Z - 7286.49 mhz - kikicoco1334 (OCAlliance) (http://hwbot.org/community/submission/2139313_kikicoco1334_cpu_z_celeron_lga775_352_7286 .49_mhz) - (Intel Celeron LGA775 352 @7286.5MHz) 15 + 6.3 points (http://hwbot.org/rankings/overclocker/)
CPU-Z - 4604.94 mhz - kikicoco1334 (OCAlliance) (http://hwbot.org/community/submission/2139271_kikicoco1334_cpu_z_core_2_e6600_2.4ghz_460 4.94_mhz) - (Intel Core 2 E6600 (2.4Ghz) @4604.9MHz) 12.4 points (http://hwbot.org/rankings/overclocker/)
^^^^ why can't i make that red?


idk why i was keeps on hitting cb and cbb when i bench this 352 chip... it's like when i clock it it heats up so fast that i can to give some love every 30 sec or so. but when it get to a sweet spot it'll beable clock some then hits cb cbb asap! it's like this chip hates my ass

this is the only two good submission i made yesterday during the 12hrs of benching
i had a live stream going and all but no one ever poped on, i know OCM was on and thanks to our Superman get me setup and all that :thumbsup:

i just got a screen that's gonna beable to do 1280 x 1024 for me to do some sweet 3dmark (btw sorry about last time i was running the 3d didn't know that i had to set the screen rez)

WoW that awsome Kiki .......

Rick Congrats breaking 1K ........... :clapping:

:ola:
thanks man!

[OC Maximus]

3D01 cruising at 5.57Ghz, waahoooo! lmao

3DMark2001 SE - 104708 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 9800 GT @783/1102MHzhttp://hwbot.org/img/trophy-bronce.gif) 13.2 points

[Chuchnit]

Nice push today gents!! Really outstanding benching.

[Neuromancer]

wtf?!@$? 1.36vtt? that will kill chips :x

I use 1.15v :eek: then again im not using hypers.

I have been running up to 1.28 Vtt, but I had to for stability.

[rickss69]

WoW that awsome Kiki .......

Rick Congrats breaking 1K ........... :clapping:

:ola:

Holy Hell, Rickster cracked the coveted 1K boint barrier!!!!
Congrats Homie :D
I gotta find a nice 1K boint badge for all our 1K guys to wear under their usernames ;)

Thanks guys - A lot of bullshit benching going on here but I am beginning to finally run '01 in the proper order lol. :blush:

[Neuromancer]

OOOOO Grats ricks!

[rickss69]

I may give this one a shot... http://www.newegg.com/Product/Product.aspx?Item=N82E16813157231

I will be getting a new WR Revolution from RMA/NewEgg if anyone has a need for that type board.

[Witchdoctor]

I was looking at that one,

Don't know a lot about that company though.

Seems like all the boards can tear it up though

itseems to eb in the chip or not, so features seems to be the difference

Confirmed I can get dual 16x by throwing a sound card in slot 1 on the M4E :thumbsup:

This is going to be fun benching but ultimantly will be my gaming platform

[Chuchnit]

I was looking at that one,

Don't know a lot about that company though.

Seems like all the boards can tear it up though

itseems to eb in the chip or not, so features seems to be the difference

Confirmed I can get dual 16x by throwing a sound card in slot 1 on the M4E :thumbsup:

This is going to be fun benching but ultimantly will be my gaming platform

Where did you find that nice little tidbit out? Why does it enable the nf200 when a sound card is installed? Do you have to use the top pci-e x1 slot and therefore leave the pci-e_1 slot empty and use the bottom two, or are you talking about just throwing the sound card in one of the bottom pci-e x16 slots?

[Neuromancer]

Don't know a lot about that company though.

AsRock is ASUS budget line.

Except over the last couple of years they don't exactly rate "budget" anymore.

However you can get some killer boards from them in resale value (asrock has no resale value) so I would never buy it new unless it was on mega sale.

x58 boards at $100 for instance (open box) as happened a lot on newegg...

[kikicoco1334]

AsRock is ASUS budget line.

Except over the last couple of years they don't exactly rate "budget" anymore.

However you can get some killer boards from them in resale value (asrock has no resale value) so I would never buy it new unless it was on mega sale.

x58 boards at $100 for instance (open box) as happened a lot on newegg...

dude asrock is like the baby line of ASUS..

i had an AsRock 478 board and it's still up and running... it's been like 4 years rofl

they are not bad really tho

[OC Maximus]

Chip maxes out at 5.594GHz in 3D so far.

Bone stock 4870x2

3DMark2001 SE - 116213 marks - OC Maximus (OCAlliance) - (Ati Radeon HD 4870X2 @880/980MHz) 2.2 + 18.5 points

[Witchdoctor]

Where did you find that nice little tidbit out? Why does it enable the nf200 when a sound card is installed? Do you have to use the top pci-e x1 slot and therefore leave the pci-e_1 slot empty and use the bottom two, or are you talking about just throwing the sound card in one of the bottom pci-e x16 slots?

I was reading an artical on the NF200 used in the ROG Maximus 3

After reading I looked at the specs of the R4E and they are configed identical

this is the way it worked

4x 16x slots top to bottom

the other ones are not even in the equasion

Slot 1 occupied = 16x
Slots 1 & 2 occupied = 8x8
Slots 2 & 3 occupied = 8x8
Slots 2 & 4 occupied = 8x8
Slots 1, 2 & 4 occupied = 8x16x16x
Slots 1, 2, 3 & 4 occupied = 8x8x8x8

So what I am going to do is throw my creative card in slot 1 and the 580's in 2 & 4 for full 2x 16x lanes

It only supports 3 way SLI/CF but it will accomidate physicscard, controloer card or sound card even with three cards in the slots



Wow I did not know Asrock was Asus .....
They have some really good pricing and their boards seem to get better and better

[Chuchnit]

OCM - Looks great mang. Try 9.11-10.3 Cats for 01. I think I'm close to right hehe. One of those older drivers will boost ya scores a little. :)

Witchdoctor I see what you did there. Smart thinkin.

[Neuromancer]

OCM u r my hero

[rickss69]

You can be my hero if you sell me that chip when you are done. :taunt:

[Chuchnit]

OCM is a freaking man on a mission.

[thebanik]

Some scores from yesterday, benched sub-zero after a few months, felt good, :D. Also tried GPU sub-zero finally for the first time, but didnt have cold slow bios, that marred everything, :(. So guyz without that bios you cannot do any thing at all??

wPrime 1024m - 2min 17sec 749ms - thebanik (OCAlliance) - (Intel Core i7 2600K @5593MHz) 21.8 + 13.2
wPrime 32m - 4sec 374ms - thebanik (OCAlliance) - (Intel Core i7 2600K @5593MHz) 18.7 + 12.2 points
3DMark03 - 130729 marks - thebanik (OCAlliance) - (Nvidia GeForce GTX 580 @940/1200MHz) 14.5 + 0.8 points
3DMark05 - 49433 marks - thebanik (OCAlliance) - (Nvidia GeForce GTX 580 @940/1200MHz) 11.6 + 1.4 points
3DMark06 - 38770 marks - thebanik (OCAlliance) - (Nvidia GeForce GTX 580 @940/1200MHz) 15.6 + 7.8 points
3DMark2001 SE - 119043 marks - thebanik (OCAlliance) - (Nvidia GeForce GTX 580 @940/1200MHz) 23.4 + 6.8 points
Aquamark - 392004 marks - thebanik (OCAlliance) - (Nvidia GeForce GTX 580 @940/1200MHz) 5.8 + 0.1 points

[Witchdoctor]

Nice work bro

Mod labs is a resiliant bunch. :Hi:

[OC Maximus]

OCM - Looks great mang. Try 9.11-10.3 Cats for 01. I think I'm close to right hehe. One of those older drivers will boost ya scores a little. :)
Thanks. I'll play the old driver game in a few. Then i'll put a waterblock on her and vmod :good:
OCM u r my hero
No, no, no, your my hero :D
You can be my hero if you sell me that chip when you are done. :taunt:
:taunt:
OCM is a freaking man on a mission.
Trying to bench as much as I can before I have to go back to work.
http://t1.gstatic.com/images?q=tbn:ANd9GcT6veVKq5J06_KXbtqNRMNpkK4wOSnZ9 CGnL3n50sSB56icYHCZ
Some scores from yesterday, benched sub-zero after a few months, felt good, :D. Also tried GPU sub-zero finally for the first time, but didnt have cold slow bios, that marred everything, :(. So guyz without that bios you cannot do any thing at all??

wPrime 1024m - 2min 17sec 749ms - thebanik (OCAlliance) - (Intel Core i7 2600K @5593MHz) 21.8 + 13.2
wPrime 32m - 4sec 374ms - thebanik (OCAlliance) - (Intel Core i7 2600K @5593MHz) 18.7 + 12.2 points
3DMark03 - 130729 marks - thebanik (OCAlliance) - (Nvidia GeForce GTX 580 @940/1200MHz) 14.5 + 0.8 points
3DMark05 - 49433 marks - thebanik (OCAlliance) - (Nvidia GeForce GTX 580 @940/1200MHz) 11.6 + 1.4 points
3DMark06 - 38770 marks - thebanik (OCAlliance) - (Nvidia GeForce GTX 580 @940/1200MHz) 15.6 + 7.8 points
3DMark2001 SE - 119043 marks - thebanik (OCAlliance) - (Nvidia GeForce GTX 580 @940/1200MHz) 23.4 + 6.8 points
Aquamark - 392004 marks - thebanik (OCAlliance) - (Nvidia GeForce GTX 580 @940/1200MHz) 5.8 + 0.1 points
Fawkin Outstanding work Banik! Global domination is the name of the game eh :thumbsup:

[Splave]

8800gtx
2x7900gs
x1900xt + x1900 crossfire card
2600 pro
5x celeron 352s

Inbound. HW trolling is the new game ;) Time to make some noise

[Splave]

hitting some heaven :) midnight session ftw

[Patch]

I can't seem to get any efficiency in that bench for some reason.

Borked a pansy OCZ vertex 2 trying. Put PCIE frequency at 110 and the crybaby promptly died. Makes no sense - my older generation vertex does 120+ PCIE without trouble.

[Splave]

sandy bridge pwns heaven and 03 :)

[crio]

Lost 4 runs with gtx275 lightning today at the last test....CPU pot wasn't attached properly and CPU was doing crazy sh@t...:(

One of em would have been 129K 01 :(

[Kal-EL]

oh snap

[ocgmj]

Nice work everyone and Happy Pi day (http://en.wikipedia.org/wiki/Pi_Day)!

[Patch]

Bummer Crio.

Happy pi day to you all!

[Splave]

4 of 5 352 that just came in are china :D

Going to play cpu-z im getting burnt out with direct CU II, its frustrating when you cant increase your scores further with what you have

[DOM]

got me a gigabyte ud5 :scared:

[Splave]

w00t :)

[DOM]

but looks like i have to sell the 980/r3e :(

goin to try the stt project x on sb see how they do

need to make a braket for my wb and new chamshell for the ss :P

[Splave]

had some fun with 4850 tonight :) card is decent.
couldnt get 05 and 03 to run, will reinstall os tomorrow

3DMark2001 SE - 110089 marks - Splave (OCAlliance) - (Ati Radeon HD 4850 @1100/1200MHz...33 points BRONZE
Aquamark - 388843 marks - Splave (OCAlliance) - (Ati Radeon HD 4850 @1122/1251MHz...25.4 points BRONZE

[thebanik]

4 of 5 352 that just came in are china :D

Going to play cpu-z im getting burnt out with direct CU II, its frustrating when you cant increase your scores further with what you have

Yeah, go go go splave, and do put the best as socket protector on the mobo, :P

[kikicoco1334]

i am no OCM that's able to get half million boints in less than 5 sec but here is what i got :P

PiFast - 16.08 sec - kikicoco1334 (OCAlliance) (http://hwbot.org/community/submission/2140943_kikicoco1334_pifast_core_i7_970_16.08_sec) - (Intel Core i7 970 @5079MHz)
0.5 points (http://hwbot.org/rankings/overclocker/)
(http://hwbot.org/forum/newthread.php?do=newthread&f=21&tag=result_2140943&subject=kikicoco1334+-+Core+i7+970+%40+5079MHz+-+16.08+sec+PiFast)
SuperPi - 7sec 890ms - kikicoco1334 (OCAlliance) (http://hwbot.org/community/submission/2140945_kikicoco1334_superpi_core_i7_970_7sec_890m s) - (Intel Core i7 970 @5079MHz)
0.4 points (http://hwbot.org/rankings/overclocker/)
(http://hwbot.org/forum/newthread.php?do=newthread&f=21&tag=result_2140945&subject=kikicoco1334+-+Core+i7+970+%40+5079MHz+-+7sec+890ms+SuperPi)
SuperPi 32m - 7min 44sec 313ms - kikicoco1334 (OCAlliance) (http://hwbot.org/community/submission/2140951_kikicoco1334_superpi_32m_core_i7_970_7min_ 44sec_313ms) - (Intel Core i7 970 @5079MHz)
0.5 points (http://hwbot.org/rankings/overclocker/)
(http://hwbot.org/forum/newthread.php?do=newthread&f=21&tag=result_2140951&subject=kikicoco1334+-+Core+i7+970+%40+5079MHz+-+7min+44sec+313ms+SuperPi+32m)
wPrime 1024m - 1min 37sec 109ms - kikicoco1334 (OCAlliance) (http://hwbot.org/community/submission/2140961_kikicoco1334_wprime_1024m_core_i7_970_1min _37sec_109ms) - (Intel Core i7 970 @5079MHzhttp://hwbot.org/img/trophy-medal.gif)
2.1 + 0.8 points (http://hwbot.org/rankings/overclocker/)
(http://hwbot.org/forum/newthread.php?do=newthread&f=21&tag=result_2140961&subject=kikicoco1334+-+Core+i7+970+%40+5079MHz+-+1min+37sec+109ms+wPrime+1024m)wPrime 32m - 3sec 155ms - kikicoco1334 (OCAlliance) (http://hwbot.org/community/submission/2140956_kikicoco1334_wprime_32m_core_i7_970_3sec_1 55ms) - (Intel Core i7 970 @5079MHzhttp://hwbot.org/img/trophy-medal.gif)
2.5 + 0.6 points (http://hwbot.org/rankings/overclocker/)
(http://hwbot.org/forum/newthread.php?do=newthread&f=21&tag=result_2140956&subject=kikicoco1334+-+Core+i7+970+%40+5079MHz+-+3sec+155ms+wPrime+32m)3DMark06 - 15453 marks - kikicoco1334 (OCAlliance) (http://hwbot.org/community/submission/2140897_kikicoco1334_3dmark06_geforce_9600_gso_gdd r3_15453_marks) - (Nvidia GeForce 9600 GSO GDDR3 @760/1008MHz)
4.8 points (http://hwbot.org/rankings/overclocker/)
(http://hwbot.org/forum/newthread.php?do=newthread&f=21&tag=result_2140897&subject=kikicoco1334+-+GeForce+9600+GSO+GDDR3+%40+760%2F1008MHz+-+15453+marks+3DMark06)

[OC Maximus]

LMAO :laughing:

Outstanding work, keep pushing :thumbsup:

[kikicoco1334]

i just realize that i beat all my 2D benches tonight
me am happy!

[Splave]

^nice! what cooling?

[Neuromancer]

i just realize that i beat all my 2D benches tonight
me am happy!

That always feels good. 'grats Kiki :)

[69_Goat]

Very nice, kico!

[Splave]

fellow OC'r grabbing me 2x2600ks from a microcenter to save me some coin :) $297 instead of $330 ftw! sno.lcn rox!

I have to say this is my last 2 tries for a sandy bitch, then its focus on quad sli and 990x :)

[OC Maximus]

Fawking Awesome!

[kikicoco1334]

thanks guys,
i was using LN2
32L used most of it trying to learn how to do vmod on the commando and trying to hit the 8ghz mark witch worked very well so it was worth it too bad i ran out before i can fine tuning the cards and the 970 :( idk why but my 970 will not boot in to os when it's around 220bclk i think i didn't give enough juice but the weird thing is if i just leave my chip around stock or something it'll run somewhere around 20C on air and if i clock it like around 5G it heats up so fast i have to give some LN2 every min or so and oh did i tell you guys i don't think there is a cb or cbb on this chip?! ROFL! or maybe just i never hit it

[kikicoco1334]

fellow OC'r grabbing me 2x2600ks from a microcenter to save me some coin :) $297 instead of $330 ftw! sno.lcn rox!

I have to say this is my last 2 tries for a sandy bitch, then its focus on quad sli and 990x :)

splave i just wanna you to know that you are my hero and you the man! :Hi:

[Neuromancer]

thanks guys,
i was using LN2
32L used most of it trying to learn how to do vmod on the commando and trying to hit the 8ghz mark witch worked very well so it was worth it too bad i ran out before i can fine tuning the cards and the 970 :( idk why but my 970 will not boot in to os when it's around 220bclk i think i didn't give enough juice but the weird thing is if i just leave my chip around stock or something it'll run somewhere around 20C on air and if i clock it like around 5G it heats up so fast i have to give some LN2 every min or so and oh did i tell you guys i don't think there is a cb or cbb on this chip?! ROFL! or maybe just i never hit it


You using the F1EE? IF no CB, try filling up the pot maybe?

[OC Maximus]

7950GT on H20
2600k on H20 @ 5.3-5.5GHz +

Aquamark - 194508 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @670/830MHz) 2.9 points
3DMark06 - 7383 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @680/830MHz) 3.5 points
3DMark05 - 12457 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @680/830MHz) 1.2 points
3DMark03 - 28750 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @680/830MHz) 3.1 points
3DMark2001 SE - 78562 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @680/830MHz) 7.2 points

Not a 100+ bointer but fun never the less. She will go under the soldering iron tonight.

Finally figure this chip out. Profiles make life so much better ;)

[kikicoco1334]

You using the F1EE? IF no CB, try filling up the pot maybe?

it may have but i just never ran in to it this time :laughing:
lucky me!

F1EE!!!

[Neuromancer]

it may have but i just never ran in to it this time :laughing:
lucky me!

F1EE!!!

Nice homey. Got another few weeks before I try DIcing a Sandy bridge. I miss i7, but a little old koolance ain't going to do that :ohcrap: 'specially a hexa

for SB though.. might be the perfect pot :)

[Splave]

nice job ocm :)

Kiki! Im flattered :D did you try raising pci-e MHZ to get more stability at 220+

[kikicoco1334]

Nice homey. Got another few weeks before I try DIcing a Sandy bridge. I miss i7, but a little old koolance ain't going to do that :ohcrap: 'specially a hexa

for SB though.. might be the perfect pot :)
hahaha :taunt: yeah i do like i7 a lot! but sandy is so easy and her slutty sisters that's coming out (2011) could be even scarier :scared: hahaha

nice job ocm :)

Kiki! Im flattered :D did you try raising pci-e MHZ to get more stability at 220+

i did raise the PCIE up to 105 should it be higher than that?
i am still learning :'(

[crio]

115 at least...;)

Just uploaded a buch of scores with the SS...:p

E6400 ~ 70 boints
d805 ~ 5 boints

[Splave]

:D awesome

[kikicoco1334]

sweet bro!
thanks haha that's why! i monna go fuel prob tomorrow again hahaha
the place is gonna give me a free 32L fuel for fixing there computers yay me!

[Kal-EL]

115 at least...;)

Just uploaded a buch of scores with the SS...:p

E6400 ~ 70 boints
d805 ~ 5 boints
Wow, thats a hunka chunka. :thumbsup:

[crio]

Gotta give more to the team.....
In the next couple of weeks i might get ahold a 990X + X58A-OC

[kikicoco1334]

oh lord! 990 + Giga-OC rofl!

this should be fun to watch bro! have fun man!

[Witchdoctor]

Gotta give more to the team.....
In the next couple of weeks i might get ahold a 990X + X58A-OC
:eek2: Can't wait to see how it hangs with the R3E ....

[Splave]

running some 32m at the work bench rig :X 5.5 so far, god I cant wait to run some hypers with sandy bridge....deluxe will be a frisbee

[OC Maximus]

Nice work Crio!

7950gt vGpu mod on H20
2600k on H20 @ 5.3-5.5GHz +

3DMark2001 SE - 80342 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @725/870MHzhttp://hwbot.org/img/trophy-bronce.gif) 10.5 points
3DMark03 - 30042 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @725/870MHz) 4.3 points
3DMark05 - 12815 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @720/870MHz) 2.6 points
3DMark06 - 7630 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @720/870MHz) 4.9 points
Aquamark - 210852 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @760/850MHz) 5.9 points

Weird vmod, it wasn't variable. Pegged at 1.65v but hey, it got the job done. :thumbsup:

[Splave]

she likes the volts! nice work

[Patch]

Nice benching fellas.

Finally tried the 990x cold last night. 100% humidity (stormy weather benching ftw) cut things short.

CB might be around -130, but could just be that condensation became my enemy at the same time I got around to hitting those temps.

Looks like core clocks might be a little better than my 980x, but unless something magical happens in the 1.7v+ range it isn't gonna be a chip to chase records with.

[kikicoco1334]

damn i was hoppin there are something super awesome that 990 can kick sandy's ass :P

[Splave]

mine was happy to go up to 1.95v so dont worry patch ;) try dual and single channel?

[Chuchnit]

running some 32m at the work bench rig :X 5.5 so far, god I cant wait to run some hypers with sandy bridge....deluxe will be a frisbee

bullshit! RMA for B3 and sale that fooker to ME :hug:


Speaking of hypers, what P67 are playing nice with hypers now?

[Splave]

ud5-ud7 I think ASROCK extreme and MIVE

[rickss69]

Sneakin up on Rom in his absence...:blush:

[Splave]

get em' rick!

PS. Its like christmas morning, very excited to get MIVE w00000t

[Witchdoctor]

I'm making a come back




soon :laughing:

Did you get the 4890 ?

[Splave]

riddin dirty on the deluxe lol
ripjaws 2133 8 9 8 stuff is decent :)

[DOM]

nice alllen is that on just normal water ?

i get 2 today but mb tomorrow :P

does the batch# mean anything on SB ?

[HybridChiller]

nice score

[Kal-EL]

Yah, hella nice score nutterz :)

[Splave]

nice alllen is that on just normal water ?

i get 2 today but mb tomorrow :P

does the batch# mean anything on SB ?

nope this is on a venemous-X air cooler :thumbsup: and its 73F in here :thumbsup:

5m55 in the bag

[Witchdoctor]

riddin dirty on the deluxe lol
ripjaws 2133 8 9 8 stuff is decent :)
^ SICK ^

[OC Maximus]

Splave, you are magical!!

[Splave]

zOMG mive is epic looking (fanboy much)

Also this weird device that lets the Re3 use 4 cards showed up ? anyone heard of that? :X

[OC Maximus]

and here I was thinking it was a myth :D

[Splave]

only if you cry like a little bitch about it does it appear rofl!

[DOM]

send it to me when ur done with 4 x 580 lol

so u going to try the hypers today on it ?

[Splave]

tomorrow :)

[DOM]

booooooooooooooo :P

i get the ud5 tomorrow cpus where just droped off but im at work wife doesnt know i got 2 :scared:

so have u tryed any on sub zero ?

thinking about drilling the holes for 1156/1155 on the ss :D

ocm gave me the link to the bot on the batch #'s

have u gone off that list ?

[Splave]

not at all batch seems to mean very little.

my 5.6 air chip wont do 5.4 on SS :X hates cold

[kikicoco1334]

so didd anyone you nice people figured out what's up with sandy at this point?
cuz some like ^^^ just hates cold? and how older chips just loves cold or voltage?

[DOM]

do they like the stock cooler ?

hope i find a way to put the wb on with out the right hardware

[Patch]

zOMG mive is epic looking (fanboy much)

Also this weird device that lets the Re3 use 4 cards showed up ? anyone heard of that? :X


Did the tooth fairy drop it off?

[Splave]

nope some gangster dhl guy rofl

[Splave]

having some issues lol whatever I set in bios timmings wise its reverts to 6-6-6 lol dual channel wont boot because of this.

http://valid.canardpc.com/show_oc.php?id=1717835

[DOM]

http://overclockaholics.com/forums/attachment.php?attachmentid=4789&stc=1&d=1300461041


so you got the new shammy bios ?

[Splave]

yeah tried that and same, found out that if I put any pressure at all on my HS I it wont boot in dual channel :X so I have a half screwed down venomous-X on it.....

2133 7-8-7-24-88 is instant fail in 32m so far lol...running it at 1600 7-8-7 ftl starting from the floor up I guess.

[Witchdoctor]

having some issues lol whatever I set in bios timmings wise its reverts to 6-6-6 lol dual channel wont boot because of this.

http://valid.canardpc.com/show_oc.php?id=1717835


What are you using hypers or the skills ???

1298 availible

http://hwbot.org/forum/showpost.php?p=100437&postcount=334

Let me know, planning on finishing up tonight and see what I can get out of it tommorow

[Splave]

im on 1298, this is with the STT hypers

[Witchdoctor]

Keep us posted,

I will be dicking around tommorow with some settings as well

I have only played with this for a week before I sent my last board back so any pointers are appreciated .......... :thumbsup:

I have the ripjaw 2133 7-10-7 sticks

[Splave]

well its boots dual channel 2133 7-7-7-21-68 and runs everything but 32m lol wtf

[Chuchnit]

What vdimm splig? Didn't raja say that SB requires more vdimm because it stresses the dimms more?

[Splave]

Ive been up to 1.825v set which is 1.835 real :X

[kikicoco1334]

dude i don't get it! what's making sandy so fragile or dose it just have mind of it's own?

[Witchdoctor]

well its boots dual channel 2133 7-7-7-21-68 and runs everything but 32m lol wtf


seemed with my old 2600K 32m is harder to pass than 1024 prime :Dizzy:

total oppisite of 1366 cpus for me .... ?

[Splave]

lol alright so seems to be a mem divider issuse? 2133 wont run 8 8 8 24 either. Swapped out a stick, and moved em all around, doing the ram hokey pokey but getting 32m to work is fucking jokey

[Neuromancer]

seemed with my old 2600K 32m is harder to pass than 1024 prime :Dizzy:

total oppisite of 1366 cpus for me .... ?

Yup I mentioned that before.

1.3v to pass wprime at 4.5GHz.

1.35 to pass Superpi

[Splave]

couldnt be more frustrated with this board then I am right now :Z

[OC Maximus]

eek!

[kikicoco1334]

CPU-Z - 7680 mhz - OC Maximus (OCAlliance) (http://hwbot.org/community/submission/2142728_oc_maximus_cpu_z_celeron_lga775_352_7680_m hz) - (Intel Celeron LGA775 352 @7680MHz) 32 + 10.3 points (http://hwbot.org/rankings/overclocker/)
CPU-Z - 7421 mhz - OC Maximus (OCAlliance) (http://hwbot.org/community/submission/2142729_oc_maximus_cpu_z_celeron_lga775_347_7421_m hz) - (Intel Celeron LGA775 347 @7421MHz) 12.3 points (http://hwbot.org/rankings/overclocker/)
(http://hwbot.org/forum/newthread.php?do=newthread&f=21&tag=result_2142729&subject=OC+Maximus+-+Celeron+LGA775+347+%40+7421MHz+-+7421+mhz+CPU-Z)

[OC Maximus]

Another Supercajafrajalistic Day at Kal's :thumbsup:

And some awesome beef stew to boot :D

[OC Maximus]

well its boots dual channel 2133 7-7-7-21-68 and runs everything but 32m lol wtf
Just like mine.

[Splave]

supertalent sucks? but someone has gtx2 and dominators that wont either

[OC Maximus]

My Super Talents are on ebay. Want to get another set of Gskills to try or going to wait for something better.

[OC Maximus]

8800gts512 vgpu mod on H20
2600k on H20 @ 5.3-5.5GHz +

3DMark2001 SE - 111458 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 GTS 512 Mb @929/1134MHz) 24 points
3DMark03 - 57968 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 GTS 512 Mb @929/1134MHz) 18.1 points
3DMark05 - 38314 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 GTS 512 Mb @929/1134MHz) 23.4 points
3DMark06 - 22301 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 GTS 512 Mb @929/1134MHz) 23.1 points
Aquamark - 382783 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 GTS 512 Mb @936/1145MHz) 23.7 points
3DMark Vantage - Performance - 9193 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 8800 GTS 512 Mb @936/1145MHz) 9.1 points

Not much to say, decent card on H20 + a 240 cfm delta blowing on the card can't hurt :D

Broke 2000 points overall today. Working on 2000 hw points now. :thumbsup:

[Neuromancer]

Holy shit OCM, way to go!

[Splave]

nice job OCM :)

working on 32m atm should be 5m53 territory if this one passes. who needs hypers when $125 rip-jawsX are available

[Witchdoctor]

5770's in the slot ............. :thumbsup:

Will need some time with this board to realize it's potencial, it was kicking my ass all morning :ohcrap:

[Splave]

get em witchie


6 hours of 32m tweaking is starting to pay off

[Witchdoctor]

Dammm, tear um up Splig ...... :thumbsup:

[Kal-EL]

Stellar tweak grindage splaver :)

[OC Maximus]

Awesome stuff Splaveman!

Working on SLI. Putting second card on water and vmodding this weekend :D

[Witchdoctor]

Looks pretty sick OCM

I started the day out with good intensions, but sold some local dude a motherboard, memory and a chip,

he called when he coludn't get it going so I had to run down ther and basically build it for him......... :Dizzy:
what a PITA ............. :ohcrap:

managed to get some benching in though ........... :thumbsup:

[OC Maximus]

Thanks bud :good:

8800gts512 SLI vGpu mod on H20/Air
2600k on H20 @ 5.3-5.5GHz +

3DMark2001 SE - 116746 marks - OC Maximus (OCAlliance) - (2x Nvidia GeForce 8800 GTS 512 Mb @864/1102MHz) 2.3 + 5.9 points
3DMark03 - 96521 marks - OC Maximus (OCAlliance) - (2x Nvidia GeForce 8800 GTS 512 Mb @864/1102MHzhttp://hwbot.org/img/trophy-bronce.gif) 9.3 points
3DMark05 - 47046 marks - OC Maximus (OCAlliance) - (2x Nvidia GeForce 8800 GTS 512 Mb @864/1102MHzhttp://hwbot.org/img/trophy-bronce.gif) 3.7 + 10.4 points
3DMark06 - 33300 marks - OC Maximus (OCAlliance) - (2x Nvidia GeForce 8800 GTS 512 Mb @837/1044MHzhttp://hwbot.org/img/trophy-medal.gif) 2.8 + 14 points
Aquamark - 360445 marks - OC Maximus (OCAlliance) - (2x Nvidia GeForce 8800 GTS 512 Mb @929/1166MHz) 3.7 points
3DMark Vantage - Performance - 16027 marks - OC Maximus (OCAlliance) - (2x Nvidia GeForce 8800 GTS 512 Mb @864/1134MHz) 1.7 points

Modded the second card but kept it on air since temps were good. SLI FTW.

[Witchdoctor]

think I just wasted my Intel 25M ............ :ohcrap:

[Splave]

filling up my dewar tomorrow, looks like I have to bench heaven with a new wallpaper!
Im hoping to break 5m52s tonight as well

[OC Maximus]

GTX580 vGpu modded on H20
2600k on H20 @ 5.5GHz +

3DMark2001 SE - 119059 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @1000/1200MHz) 22.3 + 6.6 points
3DMark03 - 134242 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @980/1200MHz) 15.7 + 4 points
3DMark05 - 50033 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @980/1150MHz) 13.1 + 3.9 points
Aquamark - 414108 marks - OC Maximus (OCAlliance) - (Nvidia GeForce GTX 580 @982/1150MHz) 12.2 + 3.5 points

Swapped out vreg heatsinks and rebenched with better CPU.

[Kal-EL]

Nice scores Mr. SB!

[Kal-EL]

BTW, we nudged Team MXS back down a spot ;)

[OC Maximus]

w00t!

8800gt512 in SLI next on the bench :D

[Chuchnit]

OCM you have turned into one hell of a bencher!! Great going everyone

[kikicoco1334]

^ +1

[OC Maximus]

Thanks guys. Its been a weekend full of non-stop benching. Kicked off at Kal's house on Friday benching Celerons and ended tonight setting up a pair of 8800gt512's in SLI to bench throughout the week.

Looks like we've moved back up a spot on the Bot this weekend, great work Men. :broomstick:

[crio]

Testing E8600 @ SS at -50C

http://www.hwbox.gr/images/imagehosting/4824d8701afdf70f.jpg

http://www.hwbox.gr/images/imagehosting/4824d8701afce7d1.jpg

[Kal-EL]

Is the the ONE crio? LN2 time!!!! :D

[crio]

The one and Only...Pobibly wednesday is the day.....;)

01-1M-32M and of course the primes.

[Witchdoctor]

Nice chip .... 5.6 on single stage .............. :thumbsup:

[Splave]

sup booooise :)

2 new 2600ks from micro center Georgie
L050A853's #1476 and #0702

[crio]

Splave on fire...
How many chips have you tried buddy?

[Splave]

this is 16 !!!

[Witchdoctor]

:laughing:


Insane .........