boot at a higher speed so all you need is small jumps

i think i just ran in to a really big FSB hole cuz i can do up to 217 in windows with out BSOD of any kind but when i try to boot at 200 or 205 it will not boot i have not tried anything above that yet
cuz i ran out of dice :ohcrap:
but the highest i ever got it to boot was 190 didn't try anything in between 190 to 200 tho..

but i can normally do 40MHz in FSB in windows
now it seems like i can't go over 5427 and i hit 5440 by pure luck


sorry i just passed out as i was typing this post :laughing: idk how lol i think i am just tired

i am moving everything down to the garage right now

and dice just got here too so i monna be benching my ass off now

what are you mixing the dice with ?

make sure you still have fresh air flow in the room/ garage ;)

100% medical use ethanol :laughing:
went to the lab just grabbed 2 bottles of it :rofl

but here is my voltage setup:
VCore 1.6 just increased it to 1.65
FSB 1.5
NB 1.45

what up

any one know why it's still not booting at 200mhz?
i tried 210

and now when i put it at 1.7 for vcore and now it's saying it's over voltaging
i already maxed out the FSB
and it's really not helping much
did i really already maxed out the chip on dice?
most people are getting 6G on dice with this damn chip!

kiki try a whole range of FSB over 200. Don't be afraid to keep trying up to 250+. Also play with NB volts a little. I'd say as long as you have a fan over it, 1.6v won't hurt just doing CPUZ runs.

pull a stick of ram out and go 1:1 with the fsb:memory

thank you i will give that a try

VCore 1.7
FSB 1.55 (maxed out)
NB VCore 1.55 going to be 1.6
i have a monster 80mm fan on it (3300RPM lol)

will do that too

dose it matter what slot i keep it in?



now i am just crushing the dice...
the box my mom got home today are the round tubeish looking rod kind it's stupid hard to crush it down to dust like lol

somehow i find that' description funny and retarded at the same time but that's like the best way i can put it lol

it's not doing 1:1 at all idk why i changed the voltage from 2.2 to auto and timing to 5-6-6-15 2T
will not even boot...
with one stick of ram is not really doing much ...

and is my video card that's bring me down?
i am using the GTX 260 it's a pci-e not an flat out pci

http://valid.canardpc.com/show_oc.php?id=1425021
here is my new numbers
5713.62 MHz (228.54 * 25)