Sandy noob need P67 UD4 OC help guys
 

Brand spanking new to sandy and looking for some tips and links to overclocking on gigabyte.
Up to 4.6ghz atm with everything on auto but cpu is downclocking.....

Should i be bios clocking mostly or software?
Using a 2600k.

i use the bios and soft for raising the blck

i use auto on most and just set vcore and mem volts

I just press lots of buttons really fast and hope something eventually works :)

@ DOM are you keep load-line cal on auto?

@OC button mashing ftw haha

Any thoughts to what kind of voltage gap SB like for 5ghz? Also what is the danger zone for voltage on these guys....

Depends on cooling.

W/Cing temp controlled chiller set to 22C

LLC 1

new f3 bios just had lvl 1-10 i used 5 on that one

also i was on ss

but on water i still got x55 multi

so check the max multi first see wut kind of chip you got ;)

do the new bios allow for bios template saving be chance....

5.4 = 1.64 on mine using an H70

multi clocking

LLC 100%

vtt 1.25-1.5

PLL overvolt

mem what ever you need to get the timings you want I use 1.75 for 6-9-6-26 1T on my ripjaws

all the CPU garbage off

Max power power settings

tubo on

bclk is very limited ...

then you stick any old card in the slot and it starts raining boints :laughing:

Thanks guys first night with it.
WD i'll try those in morning and post back results of my chip