Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Overclockaholics Competitive Benchmark Team (http://www.overclockaholics.com/forums/forumdisplay.php?f=100)
-   -   HWBOT Team Cup 2014 (http://www.overclockaholics.com/forums/showthread.php?t=5681)

kikicoco1334 06-21-2014 11:33 AM

HWBOT Team Cup 2014
 
the Team Cup 2014 kicked off about 3 weeks ago, we have 48pts in the bucket right now and ranked 28 out of however many.
50pts each stage and there are 30 stages divided out in 4 stages

SC1: CPU CHALLENGE
Stage #1 CPU-Z % OC Intel
Stage #2 CPU % OC AMD - Geode NX-1500+
Stage #3 Single Core Cinebench R11.5
Stage #4 AMD K6 3DMark2000
Stage #5 Yonah SuperPI 1M
Stage #6 Via SuperPI 32M
Stage #7 Athlon XP PiFast
Stage #8 Pentium II Cinebench 2003
Stage #9 Raspberry PI HWBOT Prime
Stage #10 Q6600 Wprime 1024M

SC2: GPU CHALLENGE
Stage #1 GeForce3 3DMark2001 SE
Stage #2 AMD S939 Single Core NV8000,9000 3DM01
Stage #3 3DMark Fire Strike GTX 780 Ti
Stage #4 GT 610 Cloud Gate
Stage #5 Kabini Catzilla 576P
Stage #6 S3 3DMark03
Stage #7 2x Radeon R7 240 3DMark11 Performance
Stage #8 Aquamark3 AGP - a 775 based motherboard with a AGP slot?
Stage #9 Catzilla 720P GTX 580
Stage #10 Heaven DX11 PCI - GT 610 OR HD5450

SC3: MEM CHALLENGE
Stage #1 DDR3 Memory Frequency
Stage #2 DDR Memory Frequency - I have 2 pairs of GeIL GL5124000DC not sure how far that'll go.
Stage #3 Sandy Bridge Memory Frequency
Stage #4 S462 Memory Frequency
Stage #5 32GB Memory Frequency

SC4: MISC CHALLENGE
Stage #1 Nvidia 780i,790i Reference Frequency
Stage #2 AMD K8 Reference Frequency
Stage #3 Snapdragon 800 HWBOT Prime
Stage #4 Tegra 4 HWBOT Prime
Stage #5 Realbench V2

kikicoco1334 06-21-2014 11:49 AM

I have a few potentially good AMD socket A/462 chips I'll give it a few more try when I get home.

Splave 06-23-2014 01:42 PM

ill do what I can :)

kikicoco1334 06-27-2014 05:48 AM

TBH i am pretty excited about the Q6600 section. I just picked up 2 of those different one C1 and one D0 and I have a DDR3 P45 motherboard ;)

also have a Sempron 140 so single core Cinebench R11.5 wouldn't be too hard either.

Bones 06-29-2014 09:22 AM

I'm afraid a 140 may not be quite enough for that stage, most likely a 145 will rule that with it's extra available multi. However if you have a board capable of cranking out some really high bus speeds, that would help regardless of which Sempy chip you'd be using. Regardless, go for it and see what you can do.


All times are GMT -10. The time now is 06:22 PM.


Copyright ©2009 Overclockaholics.com