Modded P5B-Deluxe with P4 631 Cedar Mill
 

Finally got a hold of a P5B-Deluxe for cheap, that just so happens to have vcore and vdimm mods already done. Also got a couple sets of Gskill HZ D9s for cheap as well.
Have a P4 631 for testing. Wasnt sure where to start first since Ive never toyed with P4s, so I bumped up to 266FSB, 1.45vcore, 2.1vdimm, 1.45NB. That went smoothly, so now trying 280FSB, same volts. Ram is at 933Mhz 4-4-4-12. Testing with Intel burn test to see where Im at. 52C load so far.
Going to see where I can get with air, then put it under water. Once Im tapped out, Ill try it out with DICE when I get a chance.

Here is my bench setup till I get a loop going. When I do, the rad will be mounted to the AC.

DFI SLI-DR in the pics.
http://s864.photobucket.com/albums/a...hing%20Setups/

what multi you using? cpuz please :D

Just using the stock x15. I dont know if its the board, or the BIOS, but there is no option to change the multi :thumbdown:

Got up to 286x15 with the same volts as above to pass burn test. Im aiming for 333 for 5Ghz air :)

Here is a 32m wprime I ran at 4.2HT. Its nuts how slow it is :blink:

it is old technology...but with dice 6ghz is possible...hmmm multi should be higher though

Wow... and I thought ATOM sucked.. I forgot about Pee4 LOL

http://hwbot.org/community/submissio...min_39sec_46ms

1m 39 seconds at 2GHz atom processor


geez man.. new props for a smart phone processor i guess.

Its a 631 3Ghz, 15x is right.

Might be getting another Cely 356, NIB. Not sure yet.

347s are what ya want!

4.5HT benchable with air :clapping:
Still slow as balls, but it seems like a good OCing chip. 1.48vcore, 1.4vtt, 1.45nb, 2.25vdimm. Ram is at 1000 4-4-4-12, definitly the best DDR2 Ive run. Will post benches once Pi 32m is done.

EDIT: Pi 32m BSOD :(

Cedar Mill 631 max multi is 15 :)