3dmark 06 1st try Overclcok
 

Thats one of my 1st tries to overlock in 3dmark 06. Here is is my results ;)
What do you think ?

Looking good Spank! Just keep pushing it harder. :)

Looks nice, what cooling you using?
Looks like you can get more out of both cpu and gpu ;)

Im using the Thermalright TRUE Black 120 with push & pull fans :)

Pretty stellar for the clocks, what kinda tweaking did you do?

Workin it out bro ............ :thumbsup:

Quick run on my 24/7 rig:
23528marks
sm20:8404 (bottlenecked by cpu)
sm30:11449 (bottlenecked by cpu)
980x@3471
gtx470@802/1000
Win7 32bit
Nvidia 258.96 drivers
Attachment 4960

Im using there settings for now and its stable so far for daily use

Multiplier x32
Fsb 134
CPU Voltage 1.375
QPI/DRAM Core Voltage : 1.60

Ram speed : 1880mhz (i have corsair dominator gt 3x2gb)
DRAM Timing Control :8-8-8-24 2t
DRAM Bus Voltage : 1.65


Everything else is on auto.

As for temperatures according core temp on idle im at 43.42.40,39c per core and at full load 3dmark unigine 2.5 and crysis 2 70 71c

Update : its 61c on crysis 2

You should be able to coax a little better score with your current cpu clock speed and a slight gpu clockspeed increase. Based off my card here, it'll run 820 core @ between 1040mv and 1087mv with the memory running at 1050. Temps ramp up to about 75c on the flying dragon on air. You won't need much more clocks beyond that until you increase your cpu speed again. Looks like its up against the cpu bottleneck again right here at 820/1050 @ 4.2ghz:
28015marks
Attachment 4961

Doesnt get much better at 850/1025: (around 80c load temps give or take)(ran at 1087mv)
Attachment 4962

hey man xp will give you cpu score a huge boost and therefore increase overall score :) lookin good though keep it up