Hes is talking about changing resistors to up the voltages Id assume, I read forward from the past to find it. Pretty much what you need is in that link, the resistors they use are adjustable(usually)
Quote:
1. changing the resistor should bring increased vMEM to max safe limit.. manufacturer did not realize gains past new voltage limit- so my guess is its not going to benefit.. VR should do just fine though.
2. OCP overall- as stated..overall GPUv OCP control/disable... OCP phase = OCP limit per phase - must for high vcore
3. vGPU is only VID, by default.. can still bump with software though, it just sets new default per VID mod.
hope that helps.
*vDDCI mod is must too... folks not seeing gains beyond ~1.25v though. I have not been able to monitor vDDCI for droop under load yet, but suspect capping might boost FPS in the same fashion PLL mod/cap works for 470/480
|