Reserved: 4U2doLN2 Contest - Page 54

rickss69 · #**531** 09-07-2010

Same problems with different ram tho Honda. I have not taken any measurements on the psu...it is the same PC Power & Cooling 1200 I have had forever.

Hondacity · #**532** 09-07-2010

980x with 1.528v is too much for air/water .....instant degrade...

during bootup....psu isn't stressed much....with aircooling settings..

Splave · #**533** 09-07-2010

Quote:

Originally Posted by rickss69

1.74 - I have noticed it takes a lot more vcore/vtt for me to boot into XP than most others...could that be a sign of a psu losing it's mojo? I just find it odd that I am having the same problem with other mb's and chips as well.

nice you have good sticks, thats not too much volts for ram

if its doing the same thing with different chips and boards it must to be the chips or boards

psu and ram are the only possibilities really.

you are using to much vcore for the 980x though stay under 1.5v unless you start tossing icecubes in

rickss69 · #**534** 09-07-2010

I am so stupid!

It has been the psu all along...plugged in the Antec and she took off like a rocket. Here is a follow up run to show the first wasnt a fluke.

Me so horny that 980X lives!

Hondacity · #**535** 09-07-2010

good thing i never bought that turbocool1200...fukcing expensive and ocz doesn't have money for rma'ing that..lol

i suggest antec hcp1200

HITandRUN · #**536** 09-07-2010

Looks like Rick is rolling hot and it will take a 980X to beat his 980X in SPI. I think I might can squeeze some PiFast passt him (had a low 18.6ties) but no fucking way I can do better than his 980X.

Pretty sad!

kikicoco1334 · #**537** 09-07-2010

i been trying cut down the speed but nothing...
i just can't get this sub 1.40 on super pi 8m at all!

idk why even i lowered the timing it's still high?
would it just maybe the timing is too low?

Witchdoctor · #**538** 09-07-2010

Man I havn't even got my XP partition installed yet .....

kikicoco1334 · #**539** 09-07-2010

FACE?
i was just looking on the FTP and then i just saw the MRI 5.1.1 where did you get that from?
http://www.overclockingalliance.com/...RI5.1.1.ISO.7z

Hondacity · #**540** 09-07-2010

Quote:

Originally Posted by kikicoco1334

i been trying cut down the speed but nothing...
i just can't get this sub 1.40 on super pi 8m at all!

idk why even i lowered the timing it's still high?
would it just maybe the timing is too low?

are you doing wazza?