[GeorgeStorm]

I know I'm not in your team, but thought I'd post here to let you guys know what I'm up o, and duke might like to know how his card is getting on
Some testing on air (daily rig)
http://hwbot.org/community/submissio...marks?new=true

[DOM]

nice George

[GeorgeStorm]

Well, you gotta start somewhere :p
Having a go at 3D, but haven't really got the cpu power to make it worthwhile, am hoping to get to know the limits of the various cards I've got, and then I'm doing a SB build for a friend, so will 'test' his build before I give it to him :p

[GFDuke]

Nice job George. Looks like you're doing well with that card. Get yourslf some cold for sure.

[GeorgeStorm]

Yeah I'm liking it
Looking at getting DI to star with, having never used a card cold before, and so I can have a go with it before I use it with the SB (hopefully)
Will then use LN2 if all goes to plan
480 will be getting the same treatment

[Kal-EL]

Yah, freekin nice card pumpin it up, good work G

[GeorgeStorm]

Thanks, don't think it's fully maxed out, might try pushing the voltage a bit more (was at 1.125v for that run)
Might try pushing the cpu a little more aswell, have benched at 4.4 before.
Need to get the fan to 100%, is a BIOS flash the only way?

[GeorgeStorm]

Have been getting less than 30k in 05 which I thought was rather poor, (i7@4.2, 580@900/2200)
Looked at afterburner afterwards, seems like the card wasn't clocking properly for the 3rd test, remained at 2D clocks (400/800) :/
What version of afterburner will let me increase voltage for the 580?
Tried a couple, including a voltage unlock, but nothing seems to work? Am using inspector instead.
Or is afterburner just misreading clocks?
Tried to run it at stock, got pretty much the same score, because afterburner says that it stayed at 400/800 all the way through :/

[Splave]

05 is a cpu test though too so low cpu speed = low score

whats OS?

[GFDuke]

Did you go into the AB config file and change the enableofficialverclocking to 1 instead of 0? But yea as Splave said. 05 is highly cpu and uncore dependant.
[Properties]
ShowGeneralTab = 1
ShowFanTab = 1
ShowMonitoringTab = 1
ShowOnScreenDisplayTab = 1
ShowScreenCaptureTab = 1
ShowProfilesTab = 1
ShowUserInterfaceTab = 1

[Settings]
Skin = default.usf
StartMinimized = 0
StartWithWindows = 0
RememberSettings = 0
FirstRun = 1
FirstUserDefineClick = 1
FirstServerRun = 1
HwPollPeriod = 1000
MMIOPageSize = 4
PCIBusFilter = -10h
ShowTooltips = 1
ShowHints = 1
PauseInSuspendedMode = 1
CurrentGpu = 0
Sync = 1
AttachMonitoringWindow = 1
MonitoringWindowOnTop = 1
ShowPerformanceProfilerStatus = 0
LCDFont = font4x6.dat
LCDScrollTimerPeriod = 30
UnlockVoltageControl = 0
UnlockVoltageMonitoring = 0
ShowOSDTime = 0
RestoreAfterSuspendedMode = 0
StartupViaTaskScheduler = 0
StartupDelay = 0
MinMonitoringGraphHeight = -1
LocalizationDebugFlags = 0
EnableLog = 0
RecreateLog = 0
LogPath =
DontStopLoggingOnWriteFailure = 0
LogLimit = 10
ForceConstantVoltage = 0
AllowCaptureVoltageDefaults = 0
Link = 1

[ATIADLHAL]
EnableUnofficialOverclocking = 1
AccessibilityCheckingPeriod = 0

[NVAPIHAL]
ClockDomainIdWorkaround = -1