[Mr.Scott]

Originally Posted by ny_driver

UPDATE#2: the new memory is no good...............OCZ Gold VX pc4000 2 x 512MB 2-2-2-8@3.3v garbage.

What do you want for it?

[ny_driver]

It's trash....tried it on another system and all I got was the bad memory beep out of each and both sticks. I only was able to run memtest on them on the SLI-DR because it's built into the BIOS.

I'll test further later because I'd really like to get them to work, but if I can't crank them up then what's the point? I'll get a refund I think.....and I'm sure they are lifetime guaranteed, but they wouldn't have any worthwhile replacements.

Maybe at least 2 of the 4 x 256MB Geil pc4000 I got for $1.25 will be good.

EDIT: not sure Mr.Scott......it's possible that they will work after freezing.

[Bones]

Yes, you can try that to see how it goes.

Good luck and at least you know someone out there will give 'em a good home if you decide to be rid of them for whatever reason - I know I could use them for something (Maybe).

[ny_driver]

I sure picked a cold night to set up on the back porch, but should have some pretty good results unless the chips are duds. I have a sweet spot outside next to fireplace, but it's snowing a little. Maybe it'll be clear tomorrow.

I think I'm going to get a waterblock for my chipset so I can chill it down to ambient like my GPU......I guess I could insulate that area also and freeze the chipset, I just need a way to chill the high voltage memory I bought that doesn't work. The plan is ever changing.

[Jor-El]

I tried to power the DFI Nf4 Sli I gt from Cecil today and no luck all I get is lit 4 red leds and fans at full speed no post.

You know what that is?

Sorry for high jacking your thread buddy.

[ny_driver]

I personally don't know, haven't encountered that problem yet. Have you looked in the manual at the post led codes. I'll look into a little later today.

[ocgmj]

Press down on the BIOS chip.

[ny_driver]

This picture belongs in this thread also. Going to be many more pictures in the near future. I have 4 more boards coming in shipments from all over the country. I'm going to keep the Expert, the SLI-DR, and 1 Ultra-D.....plus my dead one for parts. I'll have 2 Ultra-Ds for sale if they both work.

[Mr.Scott]

Originally Posted by Jor-El

I tried to power the DFI Nf4 Sli I gt from Cecil today and no luck all I get is lit 4 red leds and fans at full speed no post.

You know what that is?

Sorry for high jacking your thread buddy.

That's the 4 LED's of death. You can try a new bios chip, sometimes it works, most of the time it means the board is shot.
I forgot, make sure the ram is in the orange slots.

[ny_driver]

btw...that new BIOS chip I got didn't fix the Ultra.

EDIT: nice new Ultra will be here tomorrow.