[MaadDaawg]

Obvious typo -Q9550

Anyone have settings and volts for a 775 cpu on a 791 Utltra board? Trying to help a friend out who wants to go from 3.8 to 4.0. I only had a Q9450 on a 780i at 3.6 (gee.. it seemed fast then )

[DOM]

Never used one of those mb's but heard they weren't that great to oc quads and don't think its worth the trouble for 200 mhz more lol

[MaadDaawg]

Originally Posted by DOM

Never used one of those mb's but heard they weren't that great to oc quads and don't think its worth the trouble for 200 mhz more lol

Yeah DOM, that's basically what I told him too He wipes the floor with me in UT3 at 3.8, what does he need 4.0 for

[Kal-EL]

His UT3 Wizardry is strong?

[MaadDaawg]

His UT3 wizardry is stronger than mine

We've been playing on TS and RIIP servers. Deathmatch, Team Deathmatch, and CTF. You should come join in some time

[Kal-EL]

Originally Posted by MaadDaawg

His UT3 wizardry is stronger than mine

We've been playing on TS and RIIP servers. Deathmatch, Team Deathmatch, and CTF. You should come join in some time

I've been laying some hat from time to time on the RIIP Greed server

[Witchdoctor]

Here are some pretty solid Q6600 settings for an Asus board

With an 8 multi though you will need to get 500 FSB, that board should do it

It should also have a .67 GTL option mine did not , I would use it, vtt at 1.4 is about as high as I would take it .... High vtt on those = death



CPU Ratio = 9
FSB Frequency = 440
PCI-E Frequency = 100
FSB Strap to North Bridge = 333
DRAM Frequency = 1069
DRAM Timing Control = Manual - 5-5-5-15
DRAM Static Read Control = Auto
DRAM Read Training = Auto
Memory OC Charger = Disabled
AI Clock Twister = Lighter
AI Transaction Booster = Manual - Performance 12
CPU Voltage = 1.595
CPU GTL Voltage Reference = .65x
CPU PLL Voltage = 1.60
FSB Termination Voltage = 1.40
DRAM voltage = 2.2
Northbridge Voltage = 1.50
Southbridge voltage = 1.20
PCI-E SATA voltage = Auto
Load Line Calibration = Enabled
CPU Spread Spectrum = Auto
PCI-E Spread Spectrum = Auto
CPU Clock Skew = Auto
NB Clock Skew = Auto
CPU Margin Enhancement = Optimized Mode
C1E = Disabled
Max Cupid Value Limit = Disabled
Intel Virtualization Mode = Enabled
CPUTM Function = Disabled
Execute Disable Bit = Enabled

[MaadDaawg]

Thanks WD, I passed them along. I'll let you know what I hear back (if anything )

[GFDuke]

3.8, 4.0 no difference. If mhz made the gamer better then i would be at rank 100 in BF3.

[MaadDaawg]

yep, told him that too rofl