Ride or Die OCA4LIFE!
Log In:
Overclockaholics Forums » Hardware Section » Laptops » HP G62-367 dv TIM'S/Fan replacement

Notices

Laptops On The Go...

Reply
 
Thread Tools Display Modes
  #1  
Old 03-26-2013
PhIlLy ChEeSe's Avatar
PhIlLy ChEeSe PhIlLy ChEeSe is offline
OCA Gladiator
 
Join Date: Nov 2011
Location: New York
Posts: 914
Rep Power: 13
PhIlLy ChEeSe is on a distinguished road
Default HP G62-367 DX TIM'S/Fan replacement

I thought I'd post this up here, I know you guru's like to tinker(I only WISH I could like some of you do!!). Well here's to show you that so do I, my cuzing had a sound coming from her fan on the mainboard. I took my time, got the replacement fan and did the TIM'S while I was in there.
I maybe should run some scores with it for da team

Here we go a step by step HOW TO Again this is a HP Lappy model number "HP G62-367dv",
First you got to open her up, remove battery and all screws inside the compartment. Next remove the memory cover and hard drive covers as well.

Next the WIFI card, disconnect the snap in connections to it. Remove the screw and remove it. Remove the memory, keeping them in the order they came out. While your at it, the harddrive has three scews and a dongle. Remove the screws unplug the dongle and remove HD.
Next remove ALL remaining underside screws, again I set them in order of removal. Flip it over face up and the keyboard is the next thing removed, it has to relase from the top then the bottom slides upwards towards the screen. Release the DIN wire cable connected underneath the keyboard(there is a snap relase). The top cover of the Lappy will release with a lil upward pressure, or you can use a credit card along the edges to release the snaps.
Now there is one screw(I use a Sharpie to mark the hole) and three plug in flat cables that need unplugging.

Now there are four flat cables connected to the mainboard and three screws(again I mark them with a shapie).(ill stop here for editing) then continue........
Attached Images
File Type: jpg HP G62-367dv Fan 049.jpg (334.9 KB, 0 views)
File Type: jpg HP G62-367dv Fan 045.jpg (291.9 KB, 0 views)
File Type: jpg HP G62-367dv Fan 043.jpg (321.5 KB, 0 views)
File Type: jpg HP G62-367dv Fan 002.jpg (249.3 KB, 0 views)
File Type: jpg HP G62-367dv Fan 031.jpg (282.6 KB, 0 views)
File Type: jpg HP G62-367dv Fan 027.jpg (283.0 KB, 0 views)
File Type: jpg HP G62-367dv Fan 034.jpg (334.6 KB, 1 views)
__________________
Quote:
Originally Posted by Splave View Post
I always had 75% full pucker of my asshole from fear of it possibly harming my chip


Last edited by PhIlLy ChEeSe; 03-26-2013 at 07:47 AM. Reason: add photos missing
Reply With Quote
  #2  
Old 03-26-2013
PhIlLy ChEeSe's Avatar
PhIlLy ChEeSe PhIlLy ChEeSe is offline
OCA Gladiator
 
Join Date: Nov 2011
Location: New York
Posts: 914
Rep Power: 13
PhIlLy ChEeSe is on a distinguished road
Default

Now the motherboard(mainboard) is ready to come out, you need to pull it up from the narrow side first(CPU side last) and sorta twist it a lil bit. WALA no mo mainboard......


Next remove the HSF from the motherboard with three scews, im here to replace the FAN for the CPU but I'll do the TIM'S while I'm here. as you can see in the photos the factory GOPS it on there, so much so i'm surprised it didn't short out(unless its none conductive)!
You all know what to do here, clean and remove old TIM'S with 90% Alcohol. Watch your fingers as I've gotten tims on them then touched the wrong thing and poof no more powa!!
I used a old tooth brush dipped in the alcohol to remove anything around the chips surrounding the CPU,also did the GPU as well same way.
Attached Images
File Type: jpg HP G62-367dv Fan 001.jpg (236.6 KB, 0 views)
File Type: jpg HP G62-367dv Fan 003.jpg (350.6 KB, 0 views)
File Type: jpg HP G62-367dv Fan 039.jpg (354.1 KB, 0 views)
File Type: jpg HP G62-367dv Fan 038.jpg (233.6 KB, 0 views)
__________________
Quote:
Originally Posted by Splave View Post
I always had 75% full pucker of my asshole from fear of it possibly harming my chip


Last edited by PhIlLy ChEeSe; 03-26-2013 at 06:18 AM. Reason: add photos missing
Reply With Quote
  #3  
Old 03-26-2013
PhIlLy ChEeSe's Avatar
PhIlLy ChEeSe PhIlLy ChEeSe is offline
OCA Gladiator
 
Join Date: Nov 2011
Location: New York
Posts: 914
Rep Power: 13
PhIlLy ChEeSe is on a distinguished road
Default

I'm here to replace the CPU fan, three micro screws and its done........... Now just put everything back lol! Three screws back in the motherboard where you marked the holes with a sharpie, plug flat DIN cables back in.Finish panel goes back over mainboard, plug cables in.I used pompressed air to clean food out of the keyboard assembly, insert the DIN cale into locking plastic fitting, slide keyboard back in(snap it down into place). Flip it OVA, again I keep all scews in the order they were removed. Insert all the surrounding screws on the backside of Lappy(none in the compartments YET). I use an erasier to clean the contacts on the memory, then blow it off with air. WIFI card screw and snap on wires, then the hard drive goes in. Plug snap in plug then three scews for the HD hold down. Both covers on, only thing left is the screws from the Battery opening. I wait to replace them frist i power the unit up make sure EVERYTHING IS WORKING!! Then i power down put in battery compartment screws.
BOOM, fire it up and see..........
Attached Images
File Type: jpg HP G62-367dv Fan 004.jpg (347.6 KB, 1 views)
File Type: jpg HP G62-367dv Fan 006.jpg (311.4 KB, 0 views)
File Type: jpg HP G62-367dv Fan 008.jpg (236.9 KB, 0 views)
File Type: jpg HP G62-367dv Fan 009.jpg (245.8 KB, 0 views)
File Type: jpg HP G62-367dv Fan 011.jpg (247.6 KB, 0 views)
File Type: jpg HP G62-367dv Fan 012.jpg (268.4 KB, 0 views)
File Type: jpg HP G62-367dv Fan 014.jpg (236.8 KB, 0 views)
File Type: jpg HP G62-367dv Fan 020.jpg (220.3 KB, 1 views)
File Type: jpg HP G62-367dv Fan 021.jpg (356.3 KB, 0 views)
File Type: jpg HP G62-367dv Fan 025.jpg (346.0 KB, 0 views)
File Type: jpg HP G62-367dv Fan 033.jpg (281.7 KB, 0 views)
File Type: jpg HP G62-367dv Fan 042.jpg (348.8 KB, 0 views)
File Type: jpg HP G62-367dv Fan 043.jpg (321.5 KB, 0 views)
File Type: jpg HP G62-367dv Fan 046.jpg (254.1 KB, 0 views)
__________________
Quote:
Originally Posted by Splave View Post
I always had 75% full pucker of my asshole from fear of it possibly harming my chip

Reply With Quote
  #4  
Old 03-26-2013
PhIlLy ChEeSe's Avatar
PhIlLy ChEeSe PhIlLy ChEeSe is offline
OCA Gladiator
 
Join Date: Nov 2011
Location: New York
Posts: 914
Rep Power: 13
PhIlLy ChEeSe is on a distinguished road
Default

MODS if you wanna clean this up, or I can latter.......... Thanks!
__________________
Quote:
Originally Posted by Splave View Post
I always had 75% full pucker of my asshole from fear of it possibly harming my chip

Reply With Quote
  #5  
Old 03-26-2013
Witchdoctor's Avatar
Witchdoctor Witchdoctor is offline
OCA Gladiator
 
Join Date: Nov 2009
Posts: 6,039
Rep Power: 21
Witchdoctor will become famous soon enough
Default

Wow,

...............
__________________
You don't need a reason to help people
Reply With Quote
  #6  
Old 03-26-2013
PhIlLy ChEeSe's Avatar
PhIlLy ChEeSe PhIlLy ChEeSe is offline
OCA Gladiator
 
Join Date: Nov 2011
Location: New York
Posts: 914
Rep Power: 13
PhIlLy ChEeSe is on a distinguished road
Default

Quote:
Originally Posted by Witchdoctor View Post
Wow,

...............
Haaaa

I'm ready to zombify a few Video Cards!
I do need a GPU POT though...............
__________________
Quote:
Originally Posted by Splave View Post
I always had 75% full pucker of my asshole from fear of it possibly harming my chip

Reply With Quote
  #7  
Old 03-26-2013
MaadDaawg's Avatar
MaadDaawg MaadDaawg is offline
Beyond Help
 
Join Date: Jun 2009
Location: Chicago
Posts: 4,040
Rep Power: 19
MaadDaawg is on a distinguished road
Default

Good work Bro
__________________

www.maaddaawg.com
Reply With Quote
  #8  
Old 03-26-2013
Witchdoctor's Avatar
Witchdoctor Witchdoctor is offline
OCA Gladiator
 
Join Date: Nov 2009
Posts: 6,039
Rep Power: 21
Witchdoctor will become famous soon enough
Default

man tht shit is so small i would go blind fixing lappy's ....
__________________
You don't need a reason to help people
Reply With Quote
  #9  
Old 03-26-2013
PhIlLy ChEeSe's Avatar
PhIlLy ChEeSe PhIlLy ChEeSe is offline
OCA Gladiator
 
Join Date: Nov 2011
Location: New York
Posts: 914
Rep Power: 13
PhIlLy ChEeSe is on a distinguished road
Default

AHH TOOLS OF THE TRADE USED(IM FAWKING BLIND I SWEAR!)

Notice the magnafiying glasses!
Attached Images
File Type: jpg HP G62-367dv Fan 050.jpg (272.2 KB, 2 views)
__________________
Quote:
Originally Posted by Splave View Post
I always had 75% full pucker of my asshole from fear of it possibly harming my chip

Reply With Quote
  #10  
Old 03-26-2013
Kal-EL's Avatar
Kal-EL Kal-EL is offline
Superenthusiast
 
Join Date: Feb 2009
Location: Krypton, Hawaii
Posts: 11,027
Rep Power: 10
Kal-EL is on a distinguished road
Default

This is gonna be a very handy thread for all those laptop curious people out there.
Its always nice to have someone else go where no noob has gone before.
__________________
What kind of community do you intend to re-build?
tell me your sins and I'll sharpen my knife...(Take me to church)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -10. The time now is 09:01 PM.

Copyright ©2009-2014, Overclockaholics

Designed by: vBSkinworks