[DOM]

okay im back from running after work


D5 pump, 480 Rad, 7970 full wb, enzotech wb, t-line

[Witchdoctor]

That's awsome Dom ..............

Thanke bro

Ambient temp ?

Ambient water 1.408v 4899Mhz (75) (83) (85) (78)

Ambient temp = 21C

Cool it Boreas 1.408v 4889MHZ (67) (69) (67) (58)

So on average across all 4 cores we are looking at 80.25C on ambient water and 65.25 on the Cool it

15C better, that is actually not to shabby

that is only $ 33.33 a degree based on what I pad for it, worth every penny ....

This is promising to say the least. What will better blocks and pumps do, Possibly a rad,can it get me the 5 to 10 degrees I was hoping for as my origional thought going into procees saw me getting 20C better than ambient water, this may be acheivable after all.
I will test tonight with the setting Rick gave me and see if I can improve the staock results before tearing it down and adding componets

[Gunslinger]

Jesus that's nice, on "high end" water, similar ambient temps, I'm seeing peak temps touch 88F on my 3770K. 4C/4T at 4.6 and 1.3V

Cooling loop consists of a Swifty MCP-355 with Acetal top, 2x MCR320's and an EK Supreme LTX, 6x low speed yate loons.

[rickss69]

My bet is you will see more improvement once those settings are applied.

[Witchdoctor]

Originally Posted by Gunslinger

Jesus that's nice, on "high end" water, similar ambient temps, I'm seeing peak temps touch 88F on my 3770K. 4C/4T at 4.6 and 1.3V

Cooling loop consists of a Swifty MCP-355 with Acetal top, 2x MCR320's and an EK Supreme LTX, 6x low speed yate loons.

Wow that seems high at those voltages, great block and pump, has to be the rad preformance. High speed fans or move to a rad around 7 to 8 FPI

Coolgate has a nice product that is not the best at anything but actally performs well under many different fan speeds and at 8FPI the low speed one's work really well

Either that or the pump may have lost a step ....


Hope your right Rick, will know in a few hours .............

[DOM]

70F Ambient

[rickss69]

I already know what it is capable of as far as the cpu goes. I'm more interested in what it might do for gpu's...never tested it in that fashion.

[Witchdoctor]

Set the Boreas to these settings

Coolant Target Temp - 0
Max Chiller power - 100
Min Chiller power - 100
Max allowed - 0
Min allowed - 0


Ambient temp 21.1C

Ambient water 1.408v 4899Mhz (75) (83) (85) (78) = 80.25C

Ambient temp = 21C

Cool it Boreas on stock settings 1.408v 4889MHZ (67) (69) (67) (58) = 65.25C

The following tests are with new Boreas settings above

Ambient temp = 20.5C

Cool it Boreas Stock fans 1.408v 4889MHZ (64) (67) (65) (56) = 63C
The settings Rick provided are win as temps across all cores dropped overall dropped 2.25C with only .5C difference in test conditions for an overall gain of 1.75C






Now it is on to seeing what is the best possible fan to use with this unit

Ambient temp = 21C

Cool it Boreas Y&S 138 CFM cut your finger off fans 1.408v 4889MHZ (65) (68) (65) (57) = 63.75C

As you can see not much gain here other than decibals. Even know ambient went up .5C three of the cores gained a full degree, probably within the margin of error for Realtemp so I have to call this a tie








Ambient temp = 21C

Cool it Boreas Y.L. 38MM low speed 49CFM fans 1.408v 4889MHZ (67) (70) (68) (65) = 65.75C

Here are the Y.L. 38mm low speed fans. some significant temp gains here 2.75 average that with the testing condition being .5C higher still ends up being a gain of 2.25C, but wait a minute, were they running, I don't know as all I could here was the stock POS pump that they obviously did not spend any extra money on....
Seriously though unaudable .... (((side note, Does anyone know that static pressure of these fans ? Yate Loon D12SL-D12 , if over 1.3 mm/H2O I mat go with these for my rads on this build)))
On point again I may live with this increase as both the stock and high speed fan are obtrusivly loud and with a good pump this system would be undetectable .... stealthin FTW






To sum up tonights testing I would say Cool it has found a sweet spot with the fans as higher speed fans don't help and low speed fans loose ground. Have to think on if it worth it for silence ....

Also Rick's settings for the Boreas are WIN ..................

And last but not least the pump that comes with it is loud and it rattels but never noticed until the Yates Loon fans were on it ........

[Splave]

sweeet

[MaadDaawg]

NICE WD