[ny_driver]

I benched this @225bclk with 1.65 VTT....haven't really tested max bclk yet. Tomorrow for sure.

With this chip and turbo enabled for max multi....how do I get a validation when it jumps back to 12x while idling?

[OC Maximus]

Load the cpu.

[ny_driver]

That doesn't seem like a very good idea when about to go for max cpuz.

Just noticed the little "XS Bench" button at the bottom of realtemp. It only loads the cpu @ ~13% for ~10 seconds. I guess that will work.

[Hondacity]

1.65vtt for 225mhz is too much...even 1.5 should work....im just guestimating..

[GeorgeStorm]

Yeah I'd say it was too much, haven't had the chance to test my 920 cold (probably won't as the board only does 220 apparently)
But I can get 200 at 1.34ish, so 1.65 seems very high.

[Neuromancer]

heh heh I thought I was a juicer

way to high a VTT for that speed. And if you are dropping to 12x multi disable EIST and CSTATES in the bios.

[ny_driver]

Thanks guys.

I was just going by what I thought Splave said....but what he actually said was "1.6vtt (board has bad droop, this will equal low 1.5's)" .....it just showed 1.65 in the s/c.

I'll definitely go lower today on the VTT(for starters anyways).

I have eist enabled so I can have Turbo enabled for max clock speed.

[Splave]

Originally Posted by ny_driver

Thanks guys.

I was just going by what I thought Splave said....but what he actually said was "1.6vtt (board has bad droop, this will equal low 1.5's)" .....it just showed 1.65 in the s/c.

I'll definitely go lower today on the VTT(for starters anyways).

I have eist enabled so I can have Turbo enabled for max clock speed.

check it with a dmm you will be shocked

Im tellin ya guys you need eist lol I just benched it for 2 hours to get him some settings xpower is almost as ass backwards as this deluxe p8p board...
What bios you on NY

[Neuromancer]

Originally Posted by Splave

check it with a dmm you will be shocked

Im tellin ya guys you need eist lol I just benched it for 2 hours to get him some settings xpower is almost as ass backwards as this deluxe p8p board...
What bios you on NY

We believe you splave, just never heard of it before SB. Last MSI board I ran was the X58 platinum 222BCLK wall but was very solid up to that and disabling turbo opened up the 21X multi for all 4 cores in BIOS IIRC.

[ny_driver]

Which one on the board is VTT....is it QPI? If so I get 1.13v at stock settings. The others are CPU-.95v, DDR-1.49v, IOH-1.09v, and ICH-1.48v

I have BIOS V1.4B8 according to cpuz.

WOW.....assuming QPI is VTT at this point...I set it to 1.5v and get 1.28 on the meter. I'm running wprime1024 now and the cpu is not getting too nhot at all like last night. Max temp is only 43C today and it hit in the 90s quickly last night with 1.65VTT.

Wprime is still going, 30% now 44C max. Guess 1.65 isn't necessary at only 220 bclk/4620 cpu.

EDIT: that was only 1 thread..oops, with 4 threads it hit 80C pretty quickly and I stopped. What is too hot.