Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Intel (http://www.overclockaholics.com/forums/forumdisplay.php?f=38)
-   -   Gulftown Overclocking/Performance Thread (http://www.overclockaholics.com/forums/showthread.php?t=2101)

Splave 04-07-2010 03:50 AM

haha thanks, yeah should be today. Not much ln2 left maybe 2 liters, will play some aq3 if it does. 400k?

EDIT: I was told bios 44 was the best for the classy, but shammy said a52 will be released soon.

ReverendMaynard 04-07-2010 04:21 AM

nice work splave!!

rickss69 04-07-2010 05:55 AM

Just bid a max of $500 on a ES chip on ebay due to end in 10 hours. Figure if I win it I can play and sell it later at little to no loss.

rickss69 04-07-2010 07:43 AM

Auto notify at the Egg - in stock and one on the way.

Splave 04-07-2010 08:10 AM

ownage :)

Dentlord 04-07-2010 09:31 AM

Much better results this afternoon with the 762 ...

pifast @ 6100 and wprimes @ 5530, was just getting started when things got weird though ... evbot stopped working, could barely get it to post let alone get into windows ...

Nothing is wet, insulation is good, so Im hoping itll be ok once it thaws outl

Screenies when I can pull them off that hdd

ALSO:

CB has changed, now CB and CBB are the same ... -132

Jor-El 04-07-2010 09:52 AM

Quote:

Originally Posted by Dentlord (Post 34524)
Much better results this afternoon with the 762 ...

pifast @ 6100 and wprimes @ 5530, was just getting started when things got weird though ... evbot stopped working, could barely get it to post let alone get into windows ...

Nothing is wet, insulation is good, so Im hoping itll be ok once it thaws outl

Screenies when I can pull them off that hdd

ALSO:

CB has changed, now CB and CBB are the same ... -132

So what's the verdict: sell all 760 boards?

Splave 04-07-2010 10:41 AM

Quote:

Originally Posted by Dentlord (Post 34524)
Much better results this afternoon with the 762 ...

pifast @ 6100 and wprimes @ 5530, was just getting started when things got weird though ... evbot stopped working, could barely get it to post let alone get into windows ...

Nothing is wet, insulation is good, so Im hoping itll be ok once it thaws outl

Screenies when I can pull them off that hdd

ALSO:

CB has changed, now CB and CBB are the same ... -132

saweet! great results, x33 multi? what kinda vtt and vcore. details :) Set the signal options or left at 0 ?

I would check the closest ram slot to the pot maybe got a drip or something?

Dentlord 04-07-2010 10:49 AM

Quote:

Originally Posted by Splave (Post 34533)
saweet! great results, x33 multi? what kinda vtt and vcore. details :) Set the signal options or left at 0 ?

I would check the closest ram slot to the pot maybe got a drip or something?

33x multi yes ... ram and uncore were low, just testing the limits

vtt +300 ... it HATES any more than this, and less might be helpful (will test next time)

vcc 1.85v for 6ghz, 1.9v for 6.1ghz (2c2t, pifast and am3 ran without issue)

Wprimes would run 5530 @ 1.75v, seemed to be fine for more but when I tried to set 5600, that is when the shizz hit the fan and never recovered.

This A batch eats voltage, with the exception of vtt it scaled very well every time I bumped it until I hit the wall @ 6.1

I think Vantage and 06 @ 5.5ghz, and the other 3d at 5.9 is about what it looks like this one will do.

More testing to come.

Splave 04-07-2010 11:32 AM

did you happen to try spi 1m at all?


All times are GMT -10. The time now is 03:18 PM.


Copyright ©2009 Overclockaholics.com