Overclockaholics Forums
Page 15 of 28 « First 511121314 15 1617181925 Last »
Show 40 post(s) from this thread on one page

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   ATI (http://www.overclockaholics.com/forums/forumdisplay.php?f=42)
-   -   Lightning Strikes (http://www.overclockaholics.com/forums/showthread.php?t=2097)

Dentlord 03-17-2010 04:04 PM
Quote:
Originally Posted by Splave (Post 31655)
intersting,

Our very own steponz came through with some great intel, he spoke to MSI and they said you need 1.5.1 afterburner which is unavailable at the moments. Its a known bios issue with the current one lol they didnt put that on the box did they ;)

Dent you sure you are getting the voltages to change, or maybe you just have a great clocker. Would you mind dumping your card bios and I can compare it to mine?

I am very sure, had the dmm hooked up to vgpu measure the entire time, dmm reflected exactly what I set in AB every time (with slight overvoltage as mentioned earlier)

I cant dump the bios right now, the card is swimming in melt-off lol

Jor-El 03-17-2010 04:21 PM
Quote:
Originally Posted by Dentlord (Post 31657)
I am very sure, had the dmm hooked up to vgpu measure the entire time, dmm reflected exactly what I set in AB every time (with slight overvoltage as mentioned earlier)

I cant dump the bios right now, the card is swimming in melt-off lol
Yeah I sent a gpu-z Ss to compare BIOSes, maybe you got one with new bios already...

ReverendMaynard 03-17-2010 04:51 PM
Quote:
Originally Posted by MaadDaawg (Post 31643)
NO VOLTAGE CONTROL ON THE FERMI CARDS :ohcrap: :keeporder: :thumbdown:

Say it ain't so Joe, say it ain't so :wtf2:
Last I read, vcore control was a given on the 470 and 480.

Source Rom?

RomDominance 03-17-2010 05:07 PM
5 Attachment(s)
Not this Rom, not sure bout fermi. I am sure that the lightning sucks with this AB and its current bios. Prepped it properly, got ABE installed and no voltage control.
Still pushed thru a vantage at 1250 on the core with 1.14v so if I ever get votage control, this card looks promising. Pics are the only thing I got out of the mini-session, que sera.
Attachment 1769

Attachment 1770

Attachment 1771

Attachment 1772

Attachment 1773

Hondacity 03-17-2010 05:13 PM
rom

you didn't get the ramsink? or u just decided to use your own kit? nice pixies

Dentlord 03-17-2010 05:17 PM
1 Attachment(s)
Here is my bios version according to gpu-z
http://overclockaholics.com/forums/a...1&d=1268882133


Any chance it would be ok to fire it up with an empty pot long enough to save the bios??

RomDominance 03-17-2010 05:19 PM
honda
I use my own sync's, they allow me to insulate better. Thanks.

Jor-El 03-17-2010 05:23 PM
Very nice pics RomDom! Man that is a lot of eraser, how many per card?

So far the results are only with the card scaling with cold. Can't wait to see it scaling with cold & Voltages.

RomDominance 03-17-2010 05:49 PM
Me too! and thanks Jor. I used three blocks of eraser per side. I don't usually insulate all the way out, but I figured this card would be very cold for longer than usual bench times, so wth. Good news is no cb at -150, so with some V she should perform well. btw did you get my response that I was in Tucson?

Neuromancer 03-17-2010 08:38 PM
Quote:
Originally Posted by RomDominance (Post 31668)
Me too! and thanks Jor. I used three blocks of eraser per side. I don't usually insulate all the way out, but I figured this card would be very cold for longer than usual bench times, so wth. Good news is no cb at -150, so with some V she should perform well. btw did you get my response that I was in Tucson?
OMG 3 blocks perside?

I used 2 blocks on my mobo... damn I gotta learn how to insulate i guess :ohcrap:

Then again my pot don even get frosty... you are in a desert arent you? Why the hell you frosting at all? Its 30% humidity here I got no frost with DIce.....


All times are GMT -10. The time now is 03:07 PM.
Page 15 of 28 « First 511121314 15 1617181925 Last »
Show 40 post(s) from this thread on one page


Copyright ©2009 Overclockaholics.com