Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Intel (http://www.overclockaholics.com/forums/forumdisplay.php?f=40)
-   -   ASUS Rampage Extreme III testing thread (http://www.overclockaholics.com/forums/showthread.php?t=2447)

GFDuke 07-02-2010 11:50 AM

Any specific changes with the new bios that you know of?

Splave 07-02-2010 02:32 PM

not quite sure what they changed

Hondacity 07-06-2010 07:13 AM

xxxxxxxxxxxxxx


Quote:

Note - Uncore setting will now scale with BCLK settings when set to Auto. Manual settings will be required when running BCLKs over 220 to ensure stability and improved BCLK rates.

Note - LN2 Modes might need to be adjusted to improve cold clocking capabilities. Auto = LN2 mode 2, setting to LN2 Mode 1 will result in potentially better overclocking below -140C. This is dependent upon CPU quality and cooling.

Splave 07-06-2010 07:15 AM

good lookin out honda

Jor-El 07-06-2010 09:33 AM

My cpu liked 704 better.

"Note - Uncore setting will now scale with BCLK settings when set to Auto. Manual settings will be required when running BCLKs over 220 to ensure stability and improved BCLK rates.

Note - LN2 Modes might need to be adjusted to improve cold clocking capabilities. Auto = LN2 mode 2, setting to LN2 Mode 1 will result in potentially better overclocking below -140C. This is dependent upon CPU quality and cooling. "

Wish I had one that would get that cold. On my second GT now both 3003B and 3005F CBugged around -110 to -113 I can barely bench at those temps.

Will have to try a 3rd time :thumbdown:

Hondacity 07-06-2010 09:38 AM

did you try only 2 sticks of ram?

cb is somehow affected by ram....

ram voltage.....steponz is using 1.8v+ on his gtx2....lmao...it seems to help
ram channels....we used channel 2 and channel 3...and it sorta removes cb

Jor-El 07-06-2010 09:48 AM

Quote:

Originally Posted by Hondacity (Post 46836)
did you try only 2 sticks of ram?

cb is somehow affected by ram....

ram voltage.....steponz is using 1.8v+ on his gtx2....lmao...it seems to help
ram channels....we used channel 2 and channel 3...and it sorta removes cb

Yep I tried 1x2x&3x no luck ram doesn't help my CB only my CBB. Tried all BIOSes too.

I don't wanna kill my good old i5 ram's (GSkill perfect storm) w/ 1.9vdimm they are rare I might try with my new sticks.

After a certain vdimm I'm sure they will throw errors.

Hondacity 07-06-2010 10:06 AM

we tried slot 2 and slot 3.(4gb)...no cb

Jor-El 07-06-2010 10:12 AM

Quote:

Originally Posted by Hondacity (Post 46839)
we tried slot 2 and slot 3.(4gb)...no cb


Will give that a shot only tried 1&2... (closest to the cpu and the middle slot).

Does S.pi32m lose a lot of performance from triple channel to dual channel?

Hondacity 07-06-2010 10:15 AM

yes...

sp32m creates large files....it utilizes big big ram...

if you check moa eu finals..they onlly had 3gb..and their results were bad...


i'll try 12gb for sp32 :D


All times are GMT -10. The time now is 07:37 PM.


Copyright ©2009 Overclockaholics.com