it was the stable setting back when i had all that gigabyte boards:ohcrap:
this is the bios setup and everything around it
and now it's still NOT stable
http://img684.imageshack.us/img684/9963/96645465.th.png
http://img192.imageshack.us/img192/8204/57727542.th.png
http://img401.imageshack.us/img401/3038/13638026.th.png
http://img8.imageshack.us/img8/9909/75375627.th.png
http://img219.imageshack.us/img219/4469/89761633.th.png
http://img251.imageshack.us/img251/9072/20321158.th.png
http://img593.imageshack.us/img593/8439/79193786.th.png

whats your bclk?

201

yeah! i know it's not even alot!

4.2@1.4 that's not even alot

try 180...181...find the stable bclk...going up...

will do!

but is all my other setting looking fine?

ram subtimings are too tight...

kk!
now it's 8-8-8-20 1T and still not stable =(

try one stick of ram....

8-8-8-24-72....

changed the settings around and now it's working good =)
and the cpu was overheating a little due to forgot putting thermal compound on it ...

yeah yeah yeah i am retarded!
oh well....


btw dose celeron chips have cb or cbb?
and what is the diff bewteen cb and cbb? for the longest time i though it was the samething

cold bug ....cpu freezes during operation...

cold boot bug...cpu can't boot from off state....too cold...warm it up ..until no cbb condition..

our bad celeron didn't have a cold bug.....but it has a cbb of -100(cb was gone after applying a slightly higher voltage)

you need a torch and a thermometer for these...