Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Overclockaholics Competitive Benchmark Team (http://www.overclockaholics.com/forums/forumdisplay.php?f=100)
-   -   March Madness 2011 (http://www.overclockaholics.com/forums/showthread.php?t=4197)

kikicoco1334 03-15-2011 03:12 PM

Quote:

Originally Posted by Splave (Post 73287)
fellow OC'r grabbing me 2x2600ks from a microcenter to save me some coin :) $297 instead of $330 ftw! sno.lcn rox!

I have to say this is my last 2 tries for a sandy bitch, then its focus on quad sli and 990x :)

splave i just wanna you to know that you are my hero and you the man! :Hi:

Neuromancer 03-15-2011 04:44 PM

Quote:

Originally Posted by kikicoco1334 (Post 73290)
thanks guys,
i was using LN2
32L used most of it trying to learn how to do vmod on the commando and trying to hit the 8ghz mark witch worked very well so it was worth it too bad i ran out before i can fine tuning the cards and the 970 :( idk why but my 970 will not boot in to os when it's around 220bclk i think i didn't give enough juice but the weird thing is if i just leave my chip around stock or something it'll run somewhere around 20C on air and if i clock it like around 5G it heats up so fast i have to give some LN2 every min or so and oh did i tell you guys i don't think there is a cb or cbb on this chip?! ROFL! or maybe just i never hit it


You using the F1EE? IF no CB, try filling up the pot maybe?

OC Maximus 03-15-2011 05:43 PM

2 Attachment(s)
7950GT on H20
2600k on H20 @ 5.3-5.5GHz +

Aquamark - 194508 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @670/830MHz) 2.9 points
3DMark06 - 7383 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @680/830MHz) 3.5 points
3DMark05 - 12457 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @680/830MHz) 1.2 points
3DMark03 - 28750 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @680/830MHz) 3.1 points
3DMark2001 SE - 78562 marks - OC Maximus (OCAlliance) - (Nvidia GeForce 7950 GT @680/830MHz) 7.2 points

Not a 100+ bointer but fun never the less. She will go under the soldering iron tonight.

Finally figure this chip out. Profiles make life so much better ;)

kikicoco1334 03-15-2011 06:09 PM

Quote:

Originally Posted by Neuromancer (Post 73298)
You using the F1EE? IF no CB, try filling up the pot maybe?

it may have but i just never ran in to it this time :laughing:
lucky me!

F1EE!!!

Neuromancer 03-15-2011 08:56 PM

Quote:

Originally Posted by kikicoco1334 (Post 73304)
it may have but i just never ran in to it this time :laughing:
lucky me!

F1EE!!!

Nice homey. Got another few weeks before I try DIcing a Sandy bridge. I miss i7, but a little old koolance ain't going to do that :ohcrap: 'specially a hexa

for SB though.. might be the perfect pot :)

Splave 03-16-2011 04:54 AM

nice job ocm :)

Kiki! Im flattered :D did you try raising pci-e MHZ to get more stability at 220+

kikicoco1334 03-16-2011 06:04 AM

Quote:

Originally Posted by Neuromancer (Post 73312)
Nice homey. Got another few weeks before I try DIcing a Sandy bridge. I miss i7, but a little old koolance ain't going to do that :ohcrap: 'specially a hexa

for SB though.. might be the perfect pot :)

hahaha :taunt: yeah i do like i7 a lot! but sandy is so easy and her slutty sisters that's coming out (2011) could be even scarier :scared: hahaha

Quote:

Originally Posted by Splave (Post 73341)
nice job ocm :)

Kiki! Im flattered :D did you try raising pci-e MHZ to get more stability at 220+

i did raise the PCIE up to 105 should it be higher than that?
i am still learning :'(

crio 03-16-2011 06:25 AM

115 at least...;)

Just uploaded a buch of scores with the SS...:p

E6400 ~ 70 boints
d805 ~ 5 boints

Splave 03-16-2011 06:42 AM

:D awesome

kikicoco1334 03-16-2011 07:12 AM

sweet bro!
thanks haha that's why! i monna go fuel prob tomorrow again hahaha
the place is gonna give me a free 32L fuel for fixing there computers yay me!


All times are GMT -10. The time now is 10:53 PM.


Copyright ©2009 Overclockaholics.com