Originally Posted by kikicoco1334 (Post 54122)

so SSDs helps with this bench>?!

Originally Posted by Neuromancer (Post 54127)

SSDs make the differnce in the time it takes to copy waza. The idea behind copy waza (copy technique) is that you do not access the HDD for the bench. So no... SSDs do not make a differnce except in the time it takes to prep for superpi.

Waza makes 0 to -15% differnce in pifast when i tried it....(IE actually caused it to slow down a few times for me. But I did not try it alot.)

Originally Posted by kikicoco1334 (Post 54122)

so SSDs helps with this bench>?!

Originally Posted by HITandRUN (Post 54134)

Well SSDs are just faster but I can't generally say every bench will be faster since I didn't tested it. What I can say is that I tested my Intel X25-E drive vs. my WD Raptor 10K drive running SPI1M and the SSD was always faster.

Also my game plan of using the Maximus P55 board for some PiFast action is pretty much dead. I can't boot any ram in the first channel. I think it needs to go home back to mama for a RMA. :D ;)

Originally Posted by kikicoco1334 (Post 54137)

hmm.. i may just run to work sometime this weekend and get a SSD and see if there is anything i can do with it :D

Originally Posted by DOM (Post 54120)

i got me a R3E coming in next week :D tired of this mb cant clock mem for crap

i got a 18.67 pifast but nothing better :(

Originally Posted by Hondacity (Post 54141)

whats your existing mobo? and rams?

18.67 is fasttttttt

Originally Posted by DOM (Post 54143)

fast ? not fast enough lol

asus p6x58d premium

gskill trident 2000 cas 9

i just ordered a R3E today cuz i cant run cas 7 2000+ for nothing tryed 1.8v , 1.65v qpi volt

so hope its the mb that sucks cuz i ran 18.67 like 5 times in a row ill post it tomorrow kind of waiting for the R3E :D

Originally Posted by Neuromancer (Post 54144)

Faster than me :( I tried 5-6-5 at 1440, 6-6-6 at 1740ish and 7-7-7 at~2000 (I forget...exactly) and cant get faster than 18.78 :(

Run uncore to 4250, and QPI craps itself after ~3800+..

I thought disabling link fast would help since QPI is not 2D specific but MAN did that hurt my scores...

Hmm I have not tried over 1.5 QPI PLL yet though...

Originally Posted by DOM (Post 54145)

what xp are you using ?

and my mb doesnt have qpi pll volt its qpi dram something lik that

Originally Posted by DOM (Post 54145)

what xp are you using ?

and my mb doesnt have qpi pll volt its qpi dram something lik that

Originally Posted by Kal-EL (Post 54148)

qpi/dram is vtt as far as I know on the RE3

Originally Posted by Hondacity (Post 54146)

thats fast ...even with those slow rams LOL. you'll be in pain once you use the r3e :D

for r3e guys....skip 704 801 901....based on splave's screenshot he's using the next bios from the original 3...

Originally Posted by Hondacity (Post 54147)

same..my qpi is 36xx or so 38xx is just too high....if you make 38xxqpi ..you're running subzero......

as dom hinted..its the os....

Originally Posted by Kal-EL (Post 54148)

qpi/dram is vtt as far as I know on the RE3

Originally Posted by Hondacity (Post 54149)

1.65vtt ....is killer...just a warning

Originally Posted by Neuromancer (Post 54150)

Was using winFLP w/ SP3, then I installed chuch's 130MB XP.

Not seeing any difference, except XP has more stuff running in the background ;) (only 1 more process IIRC)

Still not home, I definitely will be tomorrow to watch my sister's kids that night, so after 830 EDT I should get some more play time.

Was really hoping to get home tonight but stopped working at 10PM and it was too late to run to the 'pot and get more caulk.:thumbdown:




Yeah dunno why but that happens on intel and AMD... people call the BUS clock on intel the QPI clock. and on AMD the hypertransport clock.

(AMD is kind of close, it is actully HTREF )

Originally Posted by DOM (Post 54151)

i dl xp rev9 ;)

Originally Posted by thebanik (Post 54152)

from where DOM???

Originally Posted by rickss69 (Post 54153)

I am using Tiny XP v9 available under my name in the ftp. Here are my bios screens for the Classified/Gulftown if it is of any help to anyone. I know the vcore is a little high...I need to do some voltage adjustments since I found that defective psu.

Originally Posted by Hondacity (Post 54157)

ok ok 980x with 1.65vtt...........KILLLAAAA

Originally Posted by rickss69 (Post 54164)

^ Gawd! The worlds tiniest screenshot! :taunt:

Originally Posted by DOM (Post 54139)

make sure you got one for me ;) lol

what rev of tiny xp are you using ?

Originally Posted by rickss69 (Post 54166)

10 more days and I may have some memory to put in the gamer... http://www.benchtec.co.uk/forums/showthread.php?t=6951 :D

Originally Posted by rickss69 (Post 54166)

10 more days and I may have some memory to put in the gamer... http://www.benchtec.co.uk/forums/showthread.php?t=6951 :D

Originally Posted by HITandRUN (Post 54171)

Ohh yeah I forgot all about it. ;)

Originally Posted by DrNip (Post 54175)

I'm not going to win this but still going to tweak the hell out of it and polish up my skills in the mean time. Shaved another 1 1/2 sec off my time.

Updated:

http://www.overclockaholics.com/foru...64&postcount=4

Originally Posted by DrNip (Post 54175)

I'm not going to win this but still going to tweak the hell out of it and polish up my skills in the mean time. Shaved another 1 1/2 sec off my time.

Updated:

http://www.overclockaholics.com/foru...64&postcount=4

Originally Posted by DOM (Post 54202)

CPU-Tweaker doesnt work for me also :( tryed older bios 1.3,1.5 nothing same lock settings

Originally Posted by DOM (Post 54202)

CPU-Tweaker doesnt work for me also :( tryed older bios 1.3,1.5 nothing same lock settings

Originally Posted by kikicoco1334 (Post 54211)

what about my?
i can't get SetFSB or ClockGen to work on my board at all.. =(

Originally Posted by rickss69 (Post 54207)

It must be a mb issue DOM.

Originally Posted by HITandRUN (Post 54214)

"memory configuration protect: disabled" on a R3E will unlock it.

Originally Posted by HITandRUN (Post 54214)

"What is your problem exactly? What mobo?