Will do!

good job on the overclock bro!

+1


Very nice clock and at a good voltage.

very similar to mine. I'm currently doing some tweaking on the voltage, but this is where I'm at now.


http://img.techpowerup.org/091005/Capture069.jpg

whats vtt and nb??? im curiouse i wouldnt mind lowering my cpu some!

yes i need some serious help with voltages, my D0's both seem to need 1.36vcore for 200x20 without turbo. :ohcrap:


:morpheus:

well I had some stability issues when I took the screen shot, and had the clocked lowered slightly from my 24/7 crunching settings. I am back up to 4.3 Ghz and slightly lower vcore. The issues I was having was the RAM. I just relaxed the timings a notch and its LinX stable now. :)

Here is CPU-Z and my voltages, hope this helps :) :clapping:

http://img.techpowerup.org/091005/Capture071.jpg

everything here is right except for VTT. VTT is set at +75Mv and is 1.28v in windows. NB is at default 1.100v

http://img.techpowerup.org/091005/Capture072.jpg

ahhh... your using an evga board... i thought you were using a EX58-UD5

I got this board when X58 came out. I was bashed. It had lotta bug issues, this and that, memory issues left and right. So everybody ditched EVGA, they went most of them to The GB UD4's or 5's. They are great boards, but I seemed to be one of the few people that sticked around with these EVGA boards and I will tell you, I wouldn't swap it out for any other board. I've done 223BLCK just like any other board at 4650 MHz or somewhere around that clock. Memory issues, well I haven't had any. The BIOS releases really helped this board mature a lot and honestly if I needed another x58 board, it'll be another EVGA :clapping::clapping:

good to hear since i work there :ohcrap:


:morpheus: