Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Extreme Overclocking (http://www.overclockaholics.com/forums/forumdisplay.php?f=82)
-   -   3D Adventures of a 2D Guy! 3D01 (http://www.overclockaholics.com/forums/showthread.php?t=2928)

Chuchnit 07-02-2010 03:37 PM

You are on the wrong driver bud. You need to load up 182.50 and you should be set :)

Jor-El 07-02-2010 03:38 PM

Quote:

Originally Posted by Chuchnit (Post 46629)
You are on the wrong driver bud. You need to load up 182.50 and you should be set :)


Ahhhh I knew you would shed me some 3d01 light!!!

Thanks Chuch I will try this weekend!

Chuchnit 07-02-2010 03:39 PM

hehe, sorry I didn't catch it sooner. I just "assumed" you were on the right driver ;)

Splave 07-02-2010 04:23 PM

also PCI-E helps if you havent jacked it up

good eye chucher :)

RomDominance 07-02-2010 04:58 PM

I got him on the 185.85 Chuch because the 182.50's don't give you voltage control with AB...at least not for me.

Chuchnit 07-02-2010 05:00 PM

Quote:

Originally Posted by RomDominance (Post 46641)
I got him on the 185.85 Chuch because the 182.50's don't give you voltage control with AB...at least not for me.

Oh I see.... I had no clue about that. evga voltage tuner not give enough voltage? Does it work with 182.50?

Patch 07-02-2010 06:00 PM

Great stuff, Jor. Rounding out your boints nicely.

Wish I had some wise tips for ya, but I suck at 01.

Splave 07-02-2010 06:05 PM

rom you can use riva tuner to up voltage with those drivers :) worked for me (although I was overvolting it like a mad man @ 1.425v) What are you using volt wise jor

http://www.xtremesystems.org/forums/...d.php?t=217002

Jor-El 07-02-2010 07:20 PM

Thanks Rom
 
Quote:

Originally Posted by Splave (Post 46650)
rom you can use riva tuner to up voltage with those drivers :) worked for me (although I was overvolting it like a mad man @ 1.425v) What are you using volt wise jor

http://www.xtremesystems.org/forums/...d.php?t=217002


I'll give it a try guys, I was using what Mr. RomDom recommend for this card: 1.31vgpu and that's it.

Big thanks to him he gave me all the GTX280 sweet spots from cold to volts. :thumbsup:

Chuchnit 07-03-2010 06:19 AM

Quote:

Originally Posted by Jor-El (Post 46652)
I'll give it a try guys, I was using what Mr. RomDom recommend for this card: 1.31vgpu and that's it.

Big thanks to him he gave me all the GTX280 sweet spots from cold to volts. :thumbsup:

Hey man Rom won't steer you wrong. Obviously that driver isn't very weak. :) Plus he was the only one here that knew which one to use that AB would work with ;). By far one of the most knowledgeable and helpful guys around here. :good::Hi:


All times are GMT -10. The time now is 12:50 PM.


Copyright ©2009 Overclockaholics.com