Overclockaholics Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Intel (http://www.overclockaholics.com/forums/forumdisplay.php?f=40)
-   -   Core i7 Memory Overclocking "Madshrimps" Article (http://www.overclockaholics.com/forums/showthread.php?t=792)

karmakazi 09-20-2009 06:37 AM
Yeah, Ihave asked shamino to pass along the idea to the evga bios gods to have it in a new classi bios.

karmakazi 09-28-2009 04:53 AM
Quote:
Originally Posted by karmakazi (Post 14772)
Yeah, Ihave asked shamino to pass along the idea to the evga bios gods to have it in a new classi bios.
Looks like my suggestion worked! Newest classified bios has B2BCL settings, and better boot up bclk abilities!

http://www.evga.com/forums/tm.asp?m=100919516

Kal-EL 09-28-2009 05:00 AM
It certainly has better boot up in my experience. I couldn't swing even a 210 blck boot up prior to the 224 bios.

The latency b2b setting evades me tho so I haven't touched it.

karmakazi 09-28-2009 06:27 AM
Quote:
Originally Posted by Kal-EL (Post 15197)
It certainly has better boot up in my experience. I couldn't swing even a 210 blck boot up prior to the 224 bios.

The latency b2b setting evades me tho so I haven't touched it.
Its best to experiment. When your pushing RAM clocks to the edge of stability jsut leave it on auto. But if your running more modest clocks, try using 10 and test bw. Then tighten to 8. If it will handle 6 is where some monsterous bandwidth kicks in.

Kal-EL 09-28-2009 06:30 AM
Auto is set to 0

ReverendMaynard 09-28-2009 07:49 AM
eVGA 758 SLI has this option as well now.

punx223 09-28-2009 08:35 AM
I am reading this now.... as i am listening to customers :Dizzy::ohcrap:

:morpheus:

Chicken Patty 09-28-2009 01:57 PM
Quote:
Originally Posted by ReverendMaynard (Post 15209)
eVGA 758 SLI has this option as well now.
really? Time to flash then :)

karmakazi 10-06-2009 03:09 AM
Quote:
Originally Posted by Kal-EL (Post 15205)
Auto is set to 0
Yes which also is "disabled." Usually if your on the edge messing with B2B will = instability/bsod/crash/freeze


All times are GMT -10. The time now is 01:42 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page


Copyright ©2009 Overclockaholics.com