thank you sir:blush:

good job buddy! you will notice the higher you can boot fsb wise the better for setfsb

http://valid.canardpc.com/show_oc.php?id=1424587
is my new score and i monna hit to class
i'll be back in a hr

w00t! congrats on the milestone Fu!

awesome kiki! proud of you man!

Keep pushing bud, 6ghz is in your reach :thumbsup:

all right now its time to pop the 6ghz cherry ;)

something i havent done :'(

Thats more like it!
6G is within your reach :)

wow 6ghz...thats a good achievement....grats on milestone kilometerock

thanks guys i just got home and more dice on it's way over to my house right now should =)

just real quick when i am using the clockgen for fine tune should i increase by alot at a time or as little as passable cuz i been doing both just the little as passable worked the best but still am i doing it right?

gonna try my best to hit the 6 tonight
i'll post voltage and settings at the next BSOD

boot at a higher speed so all you need is small jumps

i think i just ran in to a really big FSB hole cuz i can do up to 217 in windows with out BSOD of any kind but when i try to boot at 200 or 205 it will not boot i have not tried anything above that yet
cuz i ran out of dice :ohcrap:
but the highest i ever got it to boot was 190 didn't try anything in between 190 to 200 tho..

but i can normally do 40MHz in FSB in windows
now it seems like i can't go over 5427 and i hit 5440 by pure luck


sorry i just passed out as i was typing this post :laughing: idk how lol i think i am just tired

i am moving everything down to the garage right now

and dice just got here too so i monna be benching my ass off now

what are you mixing the dice with ?

make sure you still have fresh air flow in the room/ garage ;)

100% medical use ethanol :laughing:
went to the lab just grabbed 2 bottles of it :rofl

but here is my voltage setup:
VCore 1.6 just increased it to 1.65
FSB 1.5
NB 1.45

what up

any one know why it's still not booting at 200mhz?
i tried 210

and now when i put it at 1.7 for vcore and now it's saying it's over voltaging
i already maxed out the FSB
and it's really not helping much
did i really already maxed out the chip on dice?
most people are getting 6G on dice with this damn chip!

kiki try a whole range of FSB over 200. Don't be afraid to keep trying up to 250+. Also play with NB volts a little. I'd say as long as you have a fan over it, 1.6v won't hurt just doing CPUZ runs.

pull a stick of ram out and go 1:1 with the fsb:memory

thank you i will give that a try

VCore 1.7
FSB 1.55 (maxed out)
NB VCore 1.55 going to be 1.6
i have a monster 80mm fan on it (3300RPM lol)

will do that too

dose it matter what slot i keep it in?



now i am just crushing the dice...
the box my mom got home today are the round tubeish looking rod kind it's stupid hard to crush it down to dust like lol

somehow i find that' description funny and retarded at the same time but that's like the best way i can put it lol

it's not doing 1:1 at all idk why i changed the voltage from 2.2 to auto and timing to 5-6-6-15 2T
will not even boot...
with one stick of ram is not really doing much ...

and is my video card that's bring me down?
i am using the GTX 260 it's a pci-e not an flat out pci

http://valid.canardpc.com/show_oc.php?id=1425021
here is my new numbers
5713.62 MHz (228.54 * 25)

NEW SCORE!
http://valid.canardpc.com/show_oc.php?id=1425058
5972.76 MHz (238.91 * 25)

AND NOW MY OS JUST CRAPED OUT!
GOTTA REINSTALL THE OS NOW
DAMN IT! I AM SO PISSED!

Boooyah! Nice dude. 6GHz is in your grasp. Oh, what a feeling!

OCM :thumbsup:

dosn't feel that' great right now the os is dead so i just got done reloading the os

but it's getting there so that's good =)

Borked OS is nothing, at least you didn't jack up your board/cpu.

Go for the Gold there brotha.

OCM :thumbsup:

and the os i loaded didn't work ..
will not take os that above 200 fsb

Oh man SOOO close Kiki

Keep at it bro!

reloading the os (tiny xp) and redoing everything right now!
not going to bed before hitting 6!
btw i turned this beautiful sister down just because i got to come home and oc! and NO I AM NOT GAY!
just liking OC more than anything on earth!

well... family and friends comes first... then oc then everything...

http://valid.canardpc.com/show_oc.php?id=1426439
6000.11 MHz (240 * 25)

final score

:ola::club::jumpin::partysmile::wtf:

HAHA I just saw your 6ghz run at the bot. Congrats!

Woooo Hoooo!!! Congrats!!

OCM :thumbsup:

thank you guys so much! for the help!

i worked from 9am till 7pm today, and then came home got something to eat and started benching from 8:30pm till like 10:30 then my Dice ran out..
that's at least 5 hr yesterday and 2 hr today =)

here is my final settings...
CPU - 190 (Max Bootable FSB)
DRAM - 507MHz
CPU VCore - 1.7500V
FSB Termination - 1.55V
NV VCore - 1.600V
Memory Voltage 2.175
SB Vcore (SATA,PCIE) - 1.60V
SB Chipset Voltage - 1.100V

507MHz 5-5-5-15 6 42 10-10-10-11

woooooooooooooooooooooo


awesome!!!

great work man!!!

Nice sharing of your findings, results and settings brudder Tufu :)

i think just found out that what was i maybe doing wrong now!
my ram was set to 1:2 not 1:1
but the prob here is i have no idea how to set it to 1:1 the lowest setting that i can pick is 1:2
i think that may be the prob why is bring me down don't you guys think?

my ram is 800MHz OCZ HCP 4-4-4-15 @ 2.2v
but i am only running at 960 @ 5-5-5-15...
i am so :Dizzy:

it says 1:2 but the FSB is 240X2= 480 which is 1:1 :Dizzy:

:thumbsup:

you have to be over a certain fsb to be able to boot 1:1 :thumbsup:
set dram to lowest speed in bios then increase fsb in the bios.Watch the mem speed will keeep going up till you hit a certain fsb and then it will drop down all of a sudden :)

Congrats on the 6G, Kiko!! :clapping:
Way to rock that sucker.

damn nice kiki, keep the scores coming.....congrats.....:)