GooLUck splaver, still waitin on ups truck :), nice load up on the launcher :P

x55 pass 1.58v :)

Hey is 4300 kinda high for the NB on this 920?

ss or it didnt happen :taunt:
higher the better.... how much qpi/vtt are you using ?

I'm using ~1.55v qpi.

How come when I set the qpi link to full speed, the mouse freezes up at ~226 bclk until I back down? Tried increasing the qpi voltage which didn't help.

wuts the pci-e at ?

but the qpi craps out at high blck thats why... i used slow mode for 2d when i had a 920

pci-e at 115.
Splave said to use full speed except for cpu-z so I was trying it, plus I see many results with it at full speed. I wonder what's the deal?
I figured full speed would be better, but it seems to be benching pretty well in slow mode. Only 4 seconds behind Splaves time:)

might be mb then... i can get 250 on the 980 at full speed but never benched it haha but it does drop points in 3d after qpi 4100mhz

wuts the ioh volt ? think that the nb volt

You think ioh is the NB?

It's at 1.195v anyways.

idk wut it is lol im guessing do you know ?

i know thats one is there ich ?

I have 5 checkpoints on the board, but many other voltages in BIOS. I've got cpu, qpi, ddr, ioh, and ich on the board.

Who knows....slow mode is working fine.

First chip looks like crap @ x49 multi, gonna play with it more after work but it looks like a crapper. I hope chip#2 (same batch)turns out to be a miracle chip.

1st chip was good :) x55 max multi does 5.6ghz booting though which is strange nice low voltage chip
http://overclockaholics.com/forums/a...1&d=1302176031

http://overclockaholics.com/forums/a...1&d=1302176031

2nd chip is a socket protector, x52 max 5.2ghz


3rd chip still testing running 32m at 5.5ghz 1.61v so far 5.4 to 5.5 took .07v extra so its probably near maxing out.
http://overclockaholics.com/forums/a...1&d=1302176031

EDIT: Chip 3 passed 5.5ghz now running 5.6 1.635v :bench:

Better than the average, wish it was a 6ghz chip bro :)

.... ..... .... ..... Status update .... ..... .... ..... Status update .... ..... .... .....

Chip and board are fine. Gskills are fubar. They need 1.7v to boot now. Luckily I had a second set of the better gskills to test and things seem to be back on track. Currently in the process of redoing all 3d profiles. Boy I'm so glad the chip is still alive. Had to jumper the cmos switch to get it to clear but now the switch is working again. Working on getting this board RMA'd for a B3 model.

Sorry for all the man down, man down drama. I'm such a noob, lmao.

I remember when that 5770 went down for no apparent reason I was very worried about everything else.

I'm glad all is well.;)

Already have an RMA number from Gskill. Man, they are fast.

http://hwbot.org/community/submissio...tx_33201_marks
33201 marks
that's the only good thing i did this week

wish my 970 didn't just stop clocking...
it was doing so much better... oh well

trying chip #3 on some cold :) gotta use up my dewar to fill it on my luncher

GL bro. :clapping: Sure wish I had LN2 for my 920......I'm almost kicking ass and taking names with just my chiller.

from my experience batches don't matter at aaaalll. super unstable sandy's >_<

i had L051A163 mine did 5.65.
my friend did 5.1
other friend 5.0
other friend 4.8
all same batch.

my new batch,
LO41B213
1st one, 5.3
second one 5.7

curse sandy binning. atleast it's not called 2600X, then we we're screwed!

No doubt,

binning 990x is insanity, 2600K's are at least in the realm of being some what sane. :Dizzy:

its nice not spending so much on ln2 though ;)

i can get 2x in ur name for wut i pay lol

but now i can use my ss again its been lonley :hug:

going to set it up this weekend

chip 3 likes cold :) boots 5.72 and counting at 0c :D muahahhaah benches pf and 1m havent tried for more yet, gotta take the girl out for dinnah

not 1 but 3.... congrats on the triplets :laughing:

was it on ln2 @ 0c ? multi ?

i hope i can blck mine up off the x55 or get x56 to boot past 5.6:P

so you taking her out so you can bench att night ?

wukka wukka

Back benching 3D @ 5.6GHz w00t!

Water Temps:
6c air blowing on rig
13c water loop temp at idle
15c water loop temp at full load
(CPU 1.65vcore, x2 vGpu 1.55v, vMem 1.75v)

3DMark2001 SE - 124309 marks - OC Maximus (OCAlliance) - (Ati Radeon HD 4870X2 @965/1000MHzhttp://hwbot.org/img/trophy-medal.gif) 4.8 + 29.1 points
3DMark03 - 128995 marks - OC Maximus (OCAlliance) - (Ati Radeon HD 4870X2 @950/1000MHz) 0.9 + 24.3 points
3DMark05 - 49140 marks - OC Maximus (OCAlliance) - (Ati Radeon HD 4870X2 @920/1000MHz) 4.9 + 24.2 points

love the vmods :thumbsup:
way to go bro!
seems like the rest of us need to get our a game on! :good:

btw we are 249.6 boints behind Hellas
http://hwbot.org/community/team/h.o.t.

BTW we did lost about 50 boints today...

nice haul ocm :)

your 5mhz short of 5.6 :taunt:

but still nice mods/scores :thumbsup:

Thanks men :good:

Spent more time on these 3 benches than I'd like to admit but sure learned a lot today ;)

x56 multi ln2 0c 1.68v 75% llc

Will see how high she will go today :keeporder:

http://valid.canardpc.com/show_oc.php?id=1758180

That's pretty amazing you have the 2x gpu and the cpu in the loop and the water stays that cold. :thumbsup: How hot does the cpu get fully loaded, and what waterblock are you using? I need to get a new top of the line block, like the EK supreme HF probably.

31K has been breached

Great work everyone............ :thumbsup:

She sure knows how to take a load :taunt:

CPU is not fully loaded since its 3D with no cpu test. I'll bench 06 today and see what water temp gets too. I do have one rad shoved in the a/c so its getting the coldest air forced through it. Three triple rads total so its a nice amount of water to take the heat load.

Hehehe.........

When I was using the A/C to chill my loop I only had a single rad 120 x 240mm. More water makes a big difference I'm sure, but I need the best block out there also.

Taking the block apart to check for any residual buildup from 2 days usewith a strainer/screen from a paint gun on it.......it's not cooling nearly as well as the night I first installed the stock base plate.

EDIT: I need to design my own base plate that won't get all filled with cat hair etc.....I have a couple nice big copper passive HS. I could make 1 base-plate out of each one. I'll have to get it machined square and flat with 6 holes.......probably be a failed experiment.

Cat hair?

I'm using a Koolance CPU-360

......the hair gets everywhere, but I'm keeping my cats. The 360 looks real nice, but the EK supreme is slightly cheaper. Debating....might get an EK supreme LT if I can find one.

Hopefully I will be able to just strain out all the crap and keep using what I have.

EDIT: going to try adding a stretched stocking screen around the paintgun strainer in the reservoir, hopefully it'll still flow ok. The temps were very good the first night I reinstalled the cat-hair/lint free stock base plate.

I'd hate to have to remove the waterblock for cleaning daily.

EDIT: it still flows fine....

Knock Knock on our brothers from Greece's Door :D