Damn nice work there HC!!

Look at the voltage of the 6210Mhz submission hahahahahahahaah

and i really love that Untouchables full pot -180°C + 1.6vGPU +1000Core no ocp or anything else, just fun, needed more powerfull cpuZ

Nice job Chillah

OCP helped but not a lot .... broke 12k in '11 finallyyyyy ...

AND got this 180k in 03 :)

http://overclockaholics.com/forums/a...1&d=1320356185

:thumbsup:Nice work dent and hc

good work guys, 32m results :D not bad. x57 tomorrow with more ram speed.

Holy moly nice Splig .... got any good ram for sale :D

my Classified wouldn't work under ln².

If any OC i applied cards crashes. Even 100Mhz OC.
On Dice it worked good @ 1150Mhz but now it didn't whant to do anything.
As stock clocks it was stable as hell, but minor OC boom.

So no freaking results on ln² with classified's.

That's a real shame.
Need to get a fatpot some day when i have the cash.

nothing that good lol, test 8 more sticks of Dom's tomorrow will let ya know :)

Tearin it up as usual Hybrid and Splave.

Nice freakin 03 Dentmaster.

You guys are making me want to lap some heatsinks and try for 1600 again....

Awesome clocking Bros... I am sooooo envious :D :laughing:

go for it Patch, don't hesitate

y'all are all kicking ass there!
that's awesome!

8gbs are working at 7-8-7 so far w00t finally

NICEEEEEE!!!!!!!

OMG I'm so frustrated this morning!!!!!!!!!!!

Started running Vantage, chip at 5.8 and card at 1400 ... no problem first run over 43k ... moving up on the card, itll pass much higher, and I cant get the cpu to pass!

Wasted some really good gfx scores crashing the cpu before I finally gave up and shut down.

On the plus side I did improve my vantage by 1000 points, but damn what I could have done

hmm i had that before too bro, ended up having water in my socket :( try really drying it out for a bit. I think I ended up reinstalling as well

Just for kicks I bought another 2600k at MC today, and failed lol .... 54x max multi and 5500 max mhz ... blah

Crazy man. You'll have to buy 100 of those suckers to beat the cpu you have now.

I''m thinking of selling the MIVE's and my 5.8 chip to buy more PSUs and start binning SB-E's.

Got 4 cards on the brain again......

134921 '01 and 458k am3 tonight farting around ... soooo close to passing 03 at 1600 core, gotta figure out the perfect voltage to get through trolls and im set.

quick SandY B question for you pros...

BCLK I can not seem to get past 102.7 bootable and ROG connect does not let you BCLK for somereason. Well not in diagnostic mode at least LOL

So I thought I would up the BCLK, and then multi up while in windows to 55x (from 54x)

Instant lockup.

Not to mention 102 BCLK booting at 54X puts me at 5.5 and is just not stable enough for benching. I tried adjusting the skews down like it says in BIOS, even all the way (although did not try positive skew, or for that matter positive skew voltagE)


so is there something I am missing for BCLK ability? Or is that "binnable" too like multis? Or is it that the 55X muli limit (for my chip) is there because that is seriously the limit of the chip?

got my 2D benching done with, but was thinking once I am running a fuller OS for 3D benching I might get the BCLK clocking working via ROG connect, and if I can get 5.6 it would help alot in some of the apps.

Try low pll. I typically use 1.5v. Sometimes up to 1.6. Definately lower than stock most of the time.

Make sure your ram isn't going too high with the multi. But you already know that.

Try shooting past a bit to jump a "bclock hole". They don't happen as dramatically as cedar mills and wolfdales sometimes did, but they do occasionally exist..

It's probably a wall though. And unlike 1366 clocking, post boot overclocking either doesn't work, or doesn't get you further.

My general experience is that SB can pretty much bench anything near its max boot cpu validation if you can keep temps reasonable.

You can also try low SA and IO voltage, like .85v SA and 1.0v IO (or lower even) ... I think in Taipei we were only at 1v IO for 109 bclk.

However, the wall is the wall if its the overall limit of the chip, at 104.0x56 I can run wprime 1024, but 104.1 will not boot, nor can I set it in ROG lol

.. we don't need no education ....

yeah, the fuckin wall. My chip hits it at 51 :thumbdown: Gonna try a few more things cause I gotta save my money for 2011. Hoping something will break this week and I can buy both a new 2600K and the new socket & chip.

Might have a job with my ex companies main competitor .. will know more Monday :shock:

Thanks for the tips guys, did not think to try lower SA/VTT but on this board they are one and the same

I tried try dropping iGPU voltage down too, will give low VTT and BCLK jumping a try. My 2600 (nonK) I can get to around 104.5 IIRC, and ASUS autotune sets this chip to 103.5 after trying up to 104. something... but I cant physically set that high a BCLK at high multis

got 2 sets of these coming, little birdie says PSC is the ram for x79
http://www.amazon.com/Transcend-aXeR.../dp/B00422H6YU

^^ Thank you sir.

Good to know. If nothing else, run those sticks on auto settings and see where it puts your subtimings, and then you could pop in your hypers and loosen them up a little bit there but still keep your tight mains.

Kids are gone, so I nlited an XP OS. stripped out all non essential stuff but left all 3D and media related stuff in as well as most of the networking.

Need to look up a couple of more tweaks, going to try leaving it in IDE mode instead of AHCI, might hurt storage performance, but should reduce CPU load. In theory at least :) )

running out to get a 12 pack now and then on to installing.

Found a little more life in my 2600k, 5850 got me over 135k in '01, and with 1600 core on the lightning, got me 181697 in '03 :D

Turns out SB isn't horrible for 05 either, I got my best score today, 5850 on my SB beating 6300 on a 980x lol (53696)

Awesome chip Dent. Great clocks for sure. Who would have though a quad core could beat out a 6 core at that speed.

Very nice Dent.

Nice work dent, glad your back full force

what kinda voltage you working at for that 03? trolls are pwning me last time i tried

I downclocked to 1575 for one spot in trolls that was giving me hell, and then again at the end of nature when I got paranoid that it wasn't gonna finish lol

1.6v and -160 for the whole thing

Great work bro!

Thanks!

Rockin' all I can get from my loose ram tonight in 32m lol


http://overclockaholics.com/forums/a...1&d=1320719643

Holy balls dent! you have made more boints in the last week or so than me for the last 2 years!

Rock out dude!

Beautiful run bro great bclk

Yikes, Dentman. Beautiful clocking there.

You're about to take the US.

Thanks!!

Trying 54x now, its gonna take 108.3 bclk though :s not sure thats gonna happen.


EDIT:

Yeah not quite, got to 5810 (107.5x54) but that was all, so I might be tapped in 32m till I get some better sticks.

woot axeram will be here today, im convinced some good PSC/hynix? can overtake hypers in 32m on sandy from sheer mhz. we'll see