|
just one :P I got none :laughing:
|
Quote:
|
Quote:
|
DOM how many times do i have to tell you stop day dreaming! no matter how hard you dream, it's never gonna happen. so stop for your own sake!
|
Nice Splave so whats ETA on Zombie mod muhahaha
|
waiting for epower 2.0 from KPC and tinbo
|
that big epower thing from Vince? that thing is like pure hacks on crack!
|
Looks like the original 480
EDIT: Missed the second page. I was referring to the pic splave put up |
1 Attachment(s)
Tryin to catch Doms 2500k. Getting better with the ghost os but I need some better ram i think. Plus the imc on this chip sucks. This isn't the chip i was supposed to get when i bought it. I can tell cause there is no way this chip will do this.........http://www.hwbot.org/submission/2246...00k_6sec_140ms
Prolly need a different motherboard. |
have you tried the bios his on ?
|
Its a different board. He's on the Extreme Z board. But maybe they're compatable. I have to check around on that.
On another note...I am probably to cold on my single stage. Alot of these chips (like this one) do not like the cold. They bench better at around -20 for 6ghz. I am at -45 @ 5978mhz. This is actually a pm he sent me when i bought it that i just found in my mail over at his forums. So i guess things are on spot. I really just need to get my bus speed up and my ram speed up. I think. Some Elpida Hypers that will do 7-8-7-20 @ 2200mhz would be nice. lol Of couse this board probably couldnt handle them with my luck. It can run up to -70C (don't tried more) but optimal temp is -18C...-20C. 0C = 5900 (cold air) -20 = 6000 (LN2) -50 = 5950 (single stage) So you can use single stage for some test runs at 5950 MHz, but for final score (5880-5890 MHz) you need only LN2 and good copper pot (2+ kg mass) to keep CPU temp as close to -18C...-20C as possible. Sometimes it can go to -25 under load and -15 idle. Optimal voltages for LN2: Vcore = 1.69V-1.71V (be careful on MSI board) VCCIO = 1.20V-1.25V VCCSA = 1.20V-1.25V CPU PLL: 1.50V-1.85V (I used 1.60V for SuperPi runs on ASUS) PCH Voltage: Auto or 1.20V DRAM DATA/CTRL Ref VOltage: 0.425V-0.495V (only for Elpida Hyper based RAM and 32M, Auto for other RAM) |
doh XD
|
I told you. Ur the one that kept buggin my ass to put it on the SS.
|
go get some ln2 then :P have you tried wprime ?
my ss gets down to -55c I never tried mine on ln2 maybe I should have :( |
Keepin it mild gents.
|
push push push
|
3 Attachment(s)
Here you go Splave http://www.youtube.com/watch?v=Ivhcgskr4Yc
But ill be pushin a lot harder now! Just came in today from KP. |
ooo0o000ooooooh :) shiny!
|
NICE :D
|
Managed to pull one off, my system dont like to run benches or my Raid 0 is fubard. :ohcrap:
Got 5 BOINTS :hug: http://hwbot.org/submission/2368836_ |
|
Well,
I know its nothing extreme, but no local dry ICE. I have to drive an hour to get some, so I used the window today cold outside!!:thumbsup: Got us a couple messily bionts http://hwbot.org/user/PhIlLy%20ChEeSe%20StEaK/ |
Nice going Philly any and all boints are good ones!
|
1 Attachment(s)
Quote:
TY! :Hi: Had to post this.. |
Good going Philly! :)
|
nicely done dude! rock it!
|
TY GENTS! :Hi:
Im slowly getting it back...................:good: |
DOM you going to bench that mofo or what :P shit or get off the pot lmao
|
Quote:
I been busy with trying to sleep and been working early all week but should have some time to play with it tomorrow, its ready :keeporder: |
http://valid.canardpc.com/show_oc.php?id=2747630
Failed 4 loops into 32m here XD http://hwbot.org/submission/2369397_...70k_5sec_157ms BEEEEast |
:shock:
sweeeeeeeeeeet :trophy: |
Damn Splave thats one nice chip you got there!!! 7GHz :shock:
|
ffs great going splave.
|
thanks men, turns out I blew it on the mount....lmao maybe over 7ghz next time lol
http://i.imgur.com/JS0SYqY.jpg |
little higher
http://hwbot.org/submission/2369581_...0k_7027.81_mhz |
Quote:
:clapping: |
:good:
|
well so far got two gold with 4850 CF aq3 and crushed 01 with stock no mods on the cards :laughing: wanted to test cpu first and it so much fun with no cbb or cb :D
|
Nice job Dom good to hear new CPU is working out for you.
|
|
| All times are GMT -10. The time now is 11:06 PM. |
Copyright ©2009 Overclockaholics.com