i don't think there is uncore for the p55....

only qpi multi...

i'll dig bits about that..

The default uncore on this is x18, with no way of changing it. I thought it would be the same as 1366, maybe not. Havent messed with 1156 before really.

Whats the max safe vcore and vtt for these 24/7? Im up to 1.275vcore, 1.27VTT. At 190x21 Linx fails after the second run. Is there a reason to mess with PCH and PLL, or just try more VTT? Ram is only at 1520 7-8-7 1.64v.


EDIT: Went ahead and jacked the volts a bit more. Got to try to lower them some before moving on to keep under 75c.

Im certainly a lot happier. That extra rad knocked 11C off my idle temps, at least. About to start testing out 4.2 again.

Heres the pics, all done.
http://s864.photobucket.com/albums/a...0Main%20Gamer/

Ram is giving my issues going over 1600, guessing the mem controller is just really weak.

Man I love the LCDs! :thumbsup:

The voltage increase needed past 4Ghz just doesnt seem worth it for daily use. 1.3Vcore/1.29VTT for 4, but needs about 1.33/1.33 for 4.1. Plus 4.1 has a lower ram speed if going with 195x21 apposed to 200x20 for 4Ghz.

Got both my 470s running Kombuster at 800/3500 stock .987 volts, 50C load.