last chip max's at 7850mhz :) not too bad. FSB wall, what can ya do.

WE GOT 22K :rockon:

Total Points: 22,003.50 :thumbsup:

i ran my E6400 it sucks but it did it :laughing:

Skirting the edge of 8 is maddening, ain't it?
Nice DOM!

wow 22k

congrats team.oca

Nice work DOM! :)

now where back down to 21,988.90 :Dizzy:

im about to put the E8500 on the ss see what i can get out of it im sure ill get 20+ points :D

rofl just submitted my q6600 cpu-z from yesterday when I Was playing around 17 points brings us to........21999 lol

Total Points: 22,000.10 :thumbsup:

i need to work on this E8500 i hate how the GA-EP45-UD3P needs to have the right settings or you cant get crap :thumbdown:

i deleted all the saved settings in the bios for my x3350 and e8500 cuz i had rmaed it didnt want them to see the 600x9 setting on the e8500 lol

then i think i had them on the usb stick then that got wet so lost evey thing on it :scared:

21,997.50 hwbot doesnt want us to get past 22k :laughing:

FlameOn
 

Nice benching Splave (still pounding the i5's) and DOM!

I had many hardware points lined up for this week but as I was setting up first benches with my good old Q6600@5050Mhz the board just burst into flames:

http://img841.imageshack.us/img841/3267/img0029w.th.jpg.. ..http://img827.imageshack.us/img827/4494/img0030g.th.jpg

Wow El, thats some funk bro, never had that happen before, congrats on your burn braggin rights! ;)

eww that had to suck balls :(

what mb was it ?

over overloaded mosfets..thats a true hardcore damage:thumbsup:

It probably overheated because the mosfet sink was bowed after the Cascade mount was tighten, I will uninstall that sink and use some individual cooper sinks on each one.

I was only at 1.70vcore / 1.80pll / 1.60vtt w/ the Q6600 @ 5Ghz running wPrime 32m. :D

DOM it was a Ep45_ud3.

Wikes...... :scared: 1.7 vcore and 1.6vtt on a c2q


that is serious shit Jor .....

edited..

lol wprime lots of power definitely....

1.6v vtt is sorta near the brink of death..i think intel specs it at 1.45v..


completely irrelevant

i had my Vmch@ 1.75v...which killed my board ..lol

LOL ... never took vTT past 1.5 on c2q's .....

High vtt = Dead c2q :offhead:

ud3p ? i got that mb but forgot the settings i used on my x3350 550x8 and e8500 600x9 i need some settings to try :D

i got the e8500 hook up on the ss right now

You guys are so innocent http://www.xtremesystems.org/forums/...lies/rofl2.gif I like to gold or bust! All my 775 cpu's are fine till this date!

i kill cpus for lunch :D

nice jor! I call that chip when your done rofl :)

I think mine walls at 510, need to try it on maximus methinks

:thumbsup::D

Sure Splave, I have this beautifull specimen since 2007 and I always new in my gut it would be a great Ocier! 550fsb is a breeze with it.

I then send it to my Cousin who was using it on his office computer on stock settings till last month when I sent him a Q8300 and told him I wanted my old Q6600 back. I never benched thi beauty till yesterday on the Cascade. :cool3:

no settings jor ? T_T

my mb had been unused since jan when i upgraded to i7 and need some settings

tryed the 1.xxV X 0.67 0.63 for the ref volts i think there called, but didnt work

DOM sorry I missed that!

First for benching you won't have to worry about the REFS. For high fsb and clocks leave everything on AUTO, but vcore, vtt and pll. Ref's are only good for stability.

The Skews are more likely to be a place to look, maybe 900-900-0-0 or 800-800-0-50 etc.

What else you need help with? There are some basics on that board like: never disable cores thru BIOS, use older BIOS (F4 to F6), is it rev 1.0 or 1.1? DDR2 1Gb sticks are recommended. Board LOVES high PLL (leave on AUTO and reduce a bit when in BIOS).

That said I've only used this board with a Quad Core so I don't have any specific C2Duo settings.

aww might be the bios im on F10 and its rev 1.1 and i have 2x1GB Balllistxs

but ill try tonight when i get out of work or tomorrow moring but going to change the bios for sure

thanks didnt think about that, i dont think i was on that bios when i could get high fsb cuz the e8500 was easy to get 600fsb

Going back to my roots, got 6600gt 128mb (my first discrete GPU ever) working on the rIIIE.

HW boints to come :ohcrap:

pcgameshardware is on a tear right now and closing on our asses, fyi :morpheus:

Wow that is effed up :blink:

but in a nut shell they are averaging .1488439 Boints per submission

We just can't seem to close on the next up on the list ??

We'll get there .................. :clapping:

My RMA is verified and being shipped .... Barring anymore hardware problems I should be rippin it up in mid August after vacation....


1.http://www.overclockaholics.com/img/country/de.png PC Games Hardware members made 692 submissions worth 103.00 points, and was ranked 8th globally.2.http://www.overclockaholics.com/img/country/ca.png Overclock.net members made 535 submissions worth 148.20 points, and was ranked 33rd globally.3.http://www.overclockaholics.com/sign...17&thumb=false OC Forums members made 343 submissions worth 423.40 points, and was ranked 18th globally.4.http://www.overclockaholics.com/sign...14&thumb=false PURE members made 267 submissions worth 2,089.70 points, and was ranked 1st globally.5.http://www.overclockaholics.com/img/country/gb.png Bench Tec UK members made 264 submissions worth 355.80 points, and was ranked 4th globally.1.http://www.overclockaholics.com/img/country/de.png PC Games Hardware members made 692 submissions worth 103.00 points, and was ranked 8th globally.2.http://www.overclockaholics.com/img/country/ca.png Overclock.net members made 535 submissions worth 148.20 points, and was ranked 33rd globally.3.http://www.overclockaholics.com/sign...17&thumb=false OC Forums members made 343 submissions worth 423.40 points, and was ranked 18th globally.4.http://www.overclockaholics.com/sign...14&thumb=false PURE members made 267 submissions worth 2,089.70 points, and was ranked 1st globally.5.http://www.overclockaholics.com/img/country/gb.png Bench Tec UK members made 264 submissions worth 355.80 points, and was ranked 4th globally.

got my e8500 to boot @ 5.4ghz not need to make it stable to run 2d and 3dm01