yeah you and i both!





ahhh i see...
i was wondering why it just won't do 1:1 :laughing:




thanks guys, monna try next week with more dice or maybe just go get some ln2 and rock from there :D

cuz this time i got really lucky! i came home after work found out i only had less than maybe a lb or 2 worth of dice left in my bucket so i crushed it really really small and then just poured in there and it dropped down to about -50 with the first boot at the time it was still dropping so i just went from 4750MHz directly to 5750 :laughing: then ran super pi 1M twice and then slowly jumping from 5750 to 597*(what ever my last high was) then started to do 1 click at a time BSODed like 3~5 times so i cranked up the voltages and redid everything i have done only this time i just jumped the bastard to 6000 and soon as CPUZ poped out 6000.** didn't even look just hit F7 and computer BSODed looked in the pot DICE was GONE! :thumbsup: and then i rebooted just wanna see what the temp was -11 :rofl

i am ebaying a thermometer right now :D for ln2 and some dice use lol

Kicking ass and what names? :P loving it Fu :) Time to get your "I used LN2 to cool my orb" butt in there for real. Playa :) 7 GHz.. I smell 7.5 outta you easy :)

haha thank you sir
i will be working on that very soon

when i am running like 7 or 8 GHz should i remove the IHS?

i have been doing it for a little bit now, removed a few IHS now
i should beable safely remove it but the question is how much would it help?

I wouldn't especially if you come across a great chip. Don't want to take the chance of ruining it.

i see thank you



this is a good chip/? :shock:

pour some ln2 and find out ;)

kool!

how do i judge if its a good chip or not?
btw i wanna do that on my 920 too =) LN2 it.. if not at least DICE IT!

oh one more thing..
if i am just doing 2D benching should i just use a pci video card instead a pci-e card?

920 and LN2 = careful pouring. DIce is safe, cascade better. LN2 best but way more attention being paid.

IHS removal is so 5 years ago. I think the companies have paid a lot more attention to how the chips are built now... either that or DIce/LN2 just does not care cuz even the PCB around the CPU is getting to -150 or lower LOL

yeah...
tried 3d benching ...


i monna stay with my good o' 2d stuff....
mainly staying with CPU-Z maybe a little super pi 1m and pifast....

775 first...

Tear it up kiki!! Your enthusiasm about benching really gets my blood pumping. You will be a force to reckon with once you are done with school and making money. :ohcrap:

lol i try...

don't have much knowledge but i just jump around try different things... :D

i did get to 6Ghz with help
hopping hitting 7 soon and TRY get 8 with lots help :good:

I truly believe you have the attitude that it takes to reach the top. You aren't scared of trying new things. You just jump in head first and learn from experience. If we always had to tell you how to do everything you wouldn't be getting everywhere. Just wait a year or so when you get a ton more experience at benching.

thank you for the encouragement, it really means a lot coming from you guys..
i just wish i have a little more time like 36hrs in a day or something that would be golden! 18 hr of schooling and 15~20hr of working and benching

i have tried cut my sleeping hrs and use that to bench, come to the result that it's gonna kill me...
(automobile accident - i am not a bad driver... i am a jack ass driver :D)

Get your sleep man. It is proven that there is a direct correlation between hours of sleep and grades.

my grades are ok... mostly As
my overclocking grades are not so much...
like i just really don't wanna bug people non stop about benching
cuz idk when is a good time to bug, and how to bug stuff like that...
so i try post A LOTTA posts on the form and ask questions here =)

but i been here for some time now (not LONG) but enough that i am starting to picking up things quicker now

hey man...you know who to bug :D good lord i'm in the west coast ..LOL

oh i know i'll be bugging you alright :laughing:

i just don't wanna bug people when they are at work or doing something personal :D

really needing help now...

i been trying this for some time now.. and it's still not working at all...

i am still overclocking that celeron 356 chip and it's really not going anywhere at all...
like it's jsut not posting after 190 FSB i have tried 205 210 215 220 and it wil just NOT post! idk why...
and i already increased the voltage on the chip all the way to 1.800 and there is no reason why it's not going to pass 6080... yeah i got extra 80mhz out of it =)
but i have no idea what to do... and i was hopping someone can help me out a little...

oh and also if i put my nb to 1.600 it boots fine but if it's like 1.625 or higher it's not even booting... the poster is not showing any codes

oh btw if my fsb is any higher than 190 the poster is gonna show me error d0

101029-2301hr
i been benching for 5hrs now..
2d took me like around 3hrs didn't get anywhere tho...
so now 2 hrs got me 190mhz i am happy

http://valid.canardpc.com/show_oc.php?id=1455359
is my new score
6190MHz!

still benching i am REALY COLD!

Way to go kiki!! Way to grind those last mhz out.

seems like i am approaching the max clock it's going to get on dice...
it's not cold enough i think - when i just put dice in it and let it sit there for like a few min and then turn it on it'll hit higher clock...

i just looking at the validation and seems like the voltage is way lower than what i sat at
http://valid.canardpc.com/cache/screenshot/1455359.png
in my bios it's saying i put it at 1.85v but in the monitor page and cpu-z it's only showing 1.752v

anyone know why it's doing that at all?

most mb when reaching the higher volts you get less then what you set unless you hard mod them

like my pb5 deluxe is like that on the max is like 1.75 and only goes shows 1.65 but since i hard modded it it shows 1.75 and i give it more on the vr

but whats the max vcore on your mb in the bios ?

Not to sound like a n00b, but have you tried dropping CPU multi to see if it was the chip?

Oh yeah DOM is right too if your board does not have LLC.
Some boards on 775 had as much trouble with vDrop as vDroop if I remember correctly.

yeah Intel P965 didnt come with LLC :laughing:

i max out at 1.850V
i have to hard mod my baby for it to be a 2.0v board ...

how do i get it to LLC what ever

i'll do WHAT EVER it takes to get 8GHz

You need LN2 if you want more.

:laughing:
OLL RIGHT!

i monna see how my next week school schedule is..
if its not too busy i monna run down and do a session there on the spot :thumbsup:

real quick question...
should i or should i not just leave my pot mounted?
cuz it's so heavy and is that going to damage the board if i just leave it mounted?
cuz i really tight the screws REALLY tight!

It shouldn't hurt the board kiki, but the smart thing to do is unmount everything after each session so any condensation can dry up.

right!
i normally take everything a part clean them make sure there is no water on the board (most the time it's REALLY good!)
i take them a part RIGHT after i am done with the session =)
cuz i have TOO much hardware just laying around, i just wanna put the pot on the baord lol =)

i been trying to hunt down a 754 and 939 board =)
here is what i been looking for =)
http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWAX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWAX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWAX:IT

Oh ya layin it on the cpu will be fine. I would mount it so it can't get knocked over though.

Nice work, Kiki!

Just needs to be colder. You won't get much more than the low to mid 6 GHz's with DICE temps.

Also, you don't need massive NB volts for Celerons. Shouldn't need more than 1.6v at all. With their high multi's, Cellies don't need high fsb to get high core clocks.

939 man I owned two great boards for that..I can never remember which.. A8n32 and AN832 or something. One was Abit one was ASUS. Both were great although ASUS had more features both clocked well.

Cant help you on 754 though...never tried it due to single channel deficiency.

:thumbsup:


thanks man, i'll make sure watch for NB too, i am just realy hopping hit 7+ on LN2, xmas break man!


i know who to bug now for 939 stuff now :taunt:

Not me!! Go hit up Classic Platforms. Those guys have it fresh in their minds :)

Going to need TCCD or BH5 RAM for those platforms. Pretty penny nowadays.

i think i have the BH5 =)
so on DDR i should be good to go! :thumbsup:

got the cmx512-3200llpt 2326-T1 XMS3205v1.2


C2 = Cass 2-3-3-6 & Cass 2.5-3-3-6 On AMD Platform.
LL = Cass 2-3-2-6
XL = Cass 2-2-2-5
R = Registered
RE = Registered ECC
PT = Platinum Heat Spreader
Pro = Activity LED's
XP = XPert Memory Module with Programmable LED Display With nothing after the part# that would be a standard Black Heat spreader.

http://www.pcstats.com/articleview.c...id=1354&page=4

Looks like BH-5 to me!

Dont understand the reviewer though... saying they pushed it to 210MHz at 2-2-2-5 2.5V At 2.77V either the reviewer knew nothing about RAM or what! LOL

3 volts and 600+MHz 2-2-2-5 now thats BH-5!

i saw something like that too!

idk... wish i got the 2226-1T version