Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Overclockaholics Competitive Benchmark Team (http://www.overclockaholics.com/forums/forumdisplay.php?f=100)
-   -   Red October - OCA's shutup and bench thread (http://www.overclockaholics.com/forums/showthread.php?t=3486)

OC Maximus 10-24-2010 09:48 AM

Quote:

Originally Posted by GFDuke (Post 60524)
What card? I have a Gigabyte card thats not really like any other 4850. So i doubt you can use this mod. Unless you have a blue pcb Gigabyte 4850 card.

Here is a good link.
http://www.overclockaholics.com/foru...ead.php?t=3228

Its a Visiontek 4850 reference pbc. Tried the pencil mod and was able to get a solid 800/1200 thru all the 3D benches with the stock cooler and stock cpu speed. A couple benches ran at 825/1225 with very light artifacting.

Plan to DICE the CPU tomorrow so I'm trying to squeeze out the most of the GPU today.

Thanks for the link :thumbsup:

Hondacity 10-24-2010 10:18 AM

gfduke changed his avatar...is that ...what i think it is?

RomDominance 10-24-2010 10:28 AM

Probably not, but with you, who can say? lol
Just so there is less confusion, that is a Ferangi battlecruiser, and my friend Gerry (Dukey) is one hell of a pilot and also is the Grand Negis of Feranginar. :alien:

Hondacity 10-24-2010 10:46 AM

well i was gonna say battleship...so i was close lol

GFDuke 10-24-2010 11:55 AM

Quote:

Originally Posted by RomDominance (Post 60529)
Probably not, but with you, who can say? lol
Just so there is less confusion, that is a Ferangi battlecruiser, and my friend Gerry (Dukey) is one hell of a pilot and also is the Grand Negis of Feranginar. :alien:

Loool Thanks my Romulan friend. Yea i've been in warp speed lately in the Battlecrusier so its time to put up the Avi. :alien:

Btw. NICE 3D06 run Bren!!!

Splave 10-24-2010 09:51 PM

3 Attachment(s)
still trying to decide on which chip to keep. played with the 3018b tonight for a while. Wanted to get my 06 cpu test banged out and save a profile. Thought I would start low volts :thumbsup:
http://overclockaholics.com/forums/a...1&d=1285314446

Then focused on pi 1m :thumbsup:
http://overclockaholics.com/forums/a...1&d=1285314446

And ran un optimized pf with superpi settings :laughing: Proper run with uncore and mem speed to come
http://overclockaholics.com/forums/a...1&d=1285314446

Its a pretty nice chip -156cb -125cbb, vtt wont boot over 1.3 set but you can up to 1.4 in windows easy enough :thumbsup:
PS slow mode, highe pci-e mhz and +25mV ref voltage ftw for 1m and pf :Hi: gained about 200mhz ;)
(shout out to dread for the pci-e and ref voltage tips)

Hondacity 10-24-2010 10:06 PM

what are those rams? vdimm? bios?

Splave 10-24-2010 10:09 PM

ram is project-X 7-7-7 2000 super talent
bios is 704 (still the best 1005 is on my other bios and same settings dont fly)
vdimm 1.775v vtt 1.354 pll 1.503v

OC Maximus 10-24-2010 11:31 PM

Thanks to a few here I've completed my first vmod on the 4850. Running 910/1300 @ 1.52v through all 3D benches without skipping a beat. CPU is currently on air but that will change as soon as I can get me some DICE tomorrow or Tuesday.

Excited to say the least.

OCM :thumbsup:

*Edit*
Picked up an easy 67 boints by just running through my first few air test before going cold. Damn, I'm lovin' this boint hungry GPU.

http://i464.photobucket.com/albums/r...g?t=1288011855

ocgmj 10-25-2010 04:28 AM

Sick OCM... Keep at it bro.


All times are GMT -10. The time now is 03:49 PM.


Copyright ©2009 Overclockaholics.com