Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   DICE & LN2 Cooling (http://www.overclockaholics.com/forums/forumdisplay.php?f=9)
-   -   dipping arctic ceramic in ln2.... (http://www.overclockaholics.com/forums/showthread.php?t=2493)

Hondacity 05-04-2010 05:20 AM

privacy off

check video

www.vimeo.com/hondacity :D

FACE 05-04-2010 05:35 AM

I wanna stick things in ln2...

lol, here, kitty-kitty.. :blink:

Patch 05-04-2010 12:01 PM

Quote:

Originally Posted by Splave (Post 38997)
anyone else have this happen. Im benching around -140c for a while (CBB temp) and then I pull it all the way down to a full pot and when its flying down in temps there is a giant pop from the bottom of the pot and I get a BSOD. Restart and its fine, so im wondering wtf it is. It only happens once per session but it happens every session without fail, ASC related? I do the usual heat up to 70c's and twist the mount to get an even spread and its always a perfect mount but wtf is the popping?


Voodoo mobo mojo.

Gutterz 05-04-2010 12:14 PM

mine starts popping around -70 there is several pops then its done. I figured it was the last of the heat getting pushed out of the area. Anything pops when you cool it or heat it. Cookie sheets in ovens, siding on houses, gutters ect it. Metal shrinks when cool an expands when heated up.
If I hang an 80 foot gutter in winter temps the first 70-80 degree day will pop an kink that gutter unless I put an expansion joint in it.
I think its normal. As for the Bsod idk maybe the pop creates a vibration ripple an crashes the cpu.

Kal-EL 05-04-2010 12:58 PM

I used to get the pop on quick temp pull downs but I haven't pulled down quick in a while so no pops lately.

CPU usually freezes or bsods during quick temp movements. I believe is has something to do with how the cpu is hardmodding, like a thermal detection failure switch that says that something must be wrong cuz temps are moving too fast in the wrong direction. But then again, I stayed at a Holiday Inn so wtf?

Bobnova 05-04-2010 02:03 PM

That makes sense. It'd probably trigger the sensor that is supposed to detect the heatsink falling off at full load.

CPU goes ZOMG EJECT EJECT EJECT!


All times are GMT -10. The time now is 12:45 PM.


Copyright ©2009 Overclockaholics.com