|
:D
Quote:
|
Just snagged a 5770 from Craigslist for some hw boints :)
|
benched some 920 this morning :) did okay, reallly likes pci-e on the r3 e
|
I was jacking some Redonkeyless and 980x action tonight but Fermi was "Redonkeyless" and did all sortsa crazy shit so I worked on my cpu clocks but I think I was a lil light on IOH Vcore. Either way, had to shut down, was running too long and frosted all over, thx fermi.
I'm up to 6030mhz 6c6t for 3D03 @ 1.72vCore. What kinda nb volts you folks been giving above 6ghz? |
I usually am around 1.45v kal :) 6ghzs 3d is no small feet especially with chips of late
the 920, I was pushing 248x21 at 125pci-e speed...then tryed 130 hit 255x21 but get ntfs bsod's think my vertex 2's are crapping out. Was just thinking I should run off the marvell controller next time right? thats not affected by the pci-e mhz correct? |
Quote:
Wowsa, I keep IOH around 1.25-1.3v, mebeh I needz to up it! That is SICK pcie speed, I think you are right about running the other controller ports for HDD when pushing pcie. |
helped with pifast atleast :)
Quote:
|
Kal, I've tried 1.25 to 1.6 on ioh and it seemed to do best at 1.35 to 1.4 range.
My 920 arrived yesterday so I'll be joining you soon Splave. But I prepped the REX last night with a NB pot so will be doing that first......trying to decide whether to freeze the RAM too for 01..... Off to Monterey and Santa Cruz for a few days. Benching upon return. |
Safe travels Patch.
Ive got the 655 on the formula ready for cpuz this morning. |
Hit it nig rofl call ya in a bit
|
So a short three liter session this morning. This 655k's cb is @-122, just shuts down system at that temp:Dizzy:....got it up to 6450MHz:blink: but thats all she has in her. New chip on the way from the egg.
|
1 Attachment(s)
Quote:
:wh2::wh2::wh2::wh2::wh2::wh2::wh2: |
picking up my new baby w3680 from fedex in 10 minutes w00t.
If CB is warmer than -120, wrists will be cut and I will never global boint chase again! or I will rma it lol either one |
Wrists are slashed, this is definitely a Supestember I will definitely remember.
The icy toppings: The only ln2 filling station on the island is moving locations so no Filly the Dewars for "about" a week. WTF is "About"? Is it a week or not! Knowing those jackturds it'll be two weeks. My normal discount is out the window too, time to put the uniform on again and make some friends at the new location ;) |
My a0 should be at the house waiting for meh :D
GL with the xeon Spligdog!! Just picked up 3 gold cups and a buncha boints for the team with the 5770 epic 1300 core ftw :D |
Nice work guys .... hitting it hard ..... :thumbsup:
|
uh oh batch 3013A739 lol wtf?
|
Got a quote from another ln2 supplier, $11.14 per liter :D
|
$11 that's worse than here... :ohcrap:
|
Got a e6750 in the mailbox today... the envelope was tattered and might have had a skidmark on it... the underwear kind, not the road kind.
It not a placer, but she runs rock solid @ 4480 mhz. that's a quick 60 boints for 60 bucks.... nice trade off imo. finishing it off tonight and it's back to packing :thumbdown: |
q3fe is officially in the mobo, f1 is in the oven toasting, gonna be a late night ...
|
Joey u are my favorite overclocker by a long long shot bro. Hardware shits itself by mere mention of your name. When my chip isnt behaving, I simply threaten it that it'll be shipped to Joey and it starts behaving agin :P
Awesome bot destruction with that 5770! |
Quote:
LOL thanks Supa! I bought that card for $100 on a whim last night, it clocked like poop on air. Then after a vmod and some cold sauce it was bangin' 1300/1325 with no sweat :) I need to re-run vantage and 06 with it another time, board was so frosty by the time I ran those I could barely get it to post lol |
Quote:
Quote:
|
Well the gods were with me, unfortunately they had their collective boot up my ass.
It all started nicely, got my best spi @ 6250 (6.625s), was going to run some 32m when it bluescreened and never posted again. Stuck at cpu initial ... Thaw it out and pray for tomorrow... |
Oh that sucks Dent! Hope it works out for you.
|
1 Attachment(s)
Ok its alive at least ... hooked up the phase to it and its up and running.
I still dont know why it took a shit just now though. CB was -145 and CBB was -115 (ouch) makes for a lot of torching. I was all excited, nice to beat my best spi time within 15 minutes of installing the cpu lol http://overclockaholics.com/forums/a...1&d=1284782243 |
Woot! Dodged the bullet on that chip, lol.
|
more volts!
|
Quote:
Trying to take it easy on her instead of my normal brute force reaming. |
gotcha :)
my chip...... -118cb -75cbb Im like done with this gulftown fucking bullshit |
Quote:
The q3fe that you had or your new xeon ??? Sucky :( |
Quote:
|
new xeon
wprimes 5.2ghz 1.58v -80c but nothing I can do to make it like cold better maybe I will try it in the xpower? threw my first 655k into the maximus and -170cb -155cbb. Wont do over 6.3ghz but didnt hammer volts 1.85v board needs a new bios, it drops imc voltage to 1.1v random and read point had my ram at 2.5v lol retarded. Gonna try the other later or tomorrow, still have to run the lightning with my ass sucker 980x. HW points ftw........... |
1 Attachment(s)
Spent a little time on 32m tonight with the last of my ln2 ...
This a0 is siiick, no problem running 32m at 6.2ghz, ram @ 2000 and uncore @ 4600 :D The problem is I SUCK, need to install chuch's xp and do some proper tweaking. Here is my suck ass run (for the speed) http://overclockaholics.com/forums/a...1&d=1284860110 |
Damn, Dent... You have the hw Midas touch, I swear to God....
.... I should have everything I buy go to your place 1st, so you can touch it, put it back in the box, and ship it to me... :laughing: |
Quote:
Out of 3 980x, two are not great and one (the ES of course) is good. |
Chuchs OS made no difference to my scores.. going to try tiny 9 next.
TBH I think it aint about the OS you install but how you tweak it. Missing shit from the OS only saves HDD space. If you stop it from ever running whats the time gain? I am trying rev9 next, still cant touch FLP (unless you count install time.. one of these days I will figure out how to use the image maker for that (uses Vista winbom imaging tech with XP SP2 code... so nlite... oooo never tried vlite...) Doubt it will work.. it has the tools built in to make unattended disks.. I mean too... just have not yet... |
dent thats a 5minute cpu.....ask the brotherhood to help out..i'm sure you'll beat splaves 6minute run .:D
|
Might be a long night.
Freezing CPU and GPU. And NB. And RAM. :D Hoping to crack top 50 in 01. Still need to softmod the GPU with all this crap hooked up....... |
| All times are GMT -10. The time now is 02:44 PM. |
Copyright ©2009 Overclockaholics.com