Looking noice and shmexyy Hybrid :good:

because Duke was talking about his OC facility to upgrade it, i thought why the hell don't my pics of my room here?
So you guys can see how addicted to PC stuff i am and to OC :

it's a desk of 4m long, depth is 80cm,
at the right is benching zone with everything to hook up to mobo (psu, screen, key and mouse)

at the left is where my rig will stand when it's finished on the HD screen where is now a laptop on.
also have a 3500W airco in the room with an external unit outside on the wall, the unit in the room is movelaible.

material to work with :

soldering irons, heatgun, dremel, multimeter, voltcraft duo temp meter etc etc


http://i54.tinypic.com/o59npf.jpg
http://i54.tinypic.com/acvc52.jpg

first i win 2th place in the coolit contest with my case not finished,

then from Kal-El a nice welcome gift ;)

and now i get message i won 1st place on best hardware mod with my custom TEC for i7 mod,
price will be send by paypal end of this month.

With my case i have second place, still happy with it.

results can be seen here : http://www.showdown.newmodcity.com/

Maybe also something for other members next year to do this also ?

Congrats Hybrid! Now we all want to see it run. :good:

Congrats on all accomplishments Chiller, I believe your build is very special indeed :)

congrats man! :D

when my rig is completed, i whant back some global cups GGrrrr

i got already somethings in mind where i'm going for.
But need a new cpu pot, i was thinking of the Kingpin Gemini

want i used gemini pot? 25% off from original price :D

PM me with prize inclusive sending

small update:

tubing is almost ready just need 3th pump, a koolance PMP-400 with acetal top,
and building a drainvavle beneath.

then it's all ready just need memory dom GT 2000Mhz 12gb Triple kits.

enjoy the pics because it's closing up this build, just few mods and it's ready :

http://i51.tinypic.com/2s1u1oy.jpg

http://i51.tinypic.com/2lsd1jm.jpg

http://i55.tinypic.com/2415nhz.jpg

http://i56.tinypic.com/23uvr6a.jpg

http://i53.tinypic.com/2ytu3d1.jpg

http://i51.tinypic.com/2e0jwjl.jpg

http://i53.tinypic.com/29ql644.jpg

http://i55.tinypic.com/2071gl0.jpg

http://i53.tinypic.com/2uqkjkn.jpg

Schmexy!

I saw your ethernet cable getting snaked back through the Case. Are you going to do that with all the cables?

How about sleeving your periphs? KB and Mouse even SPDIF should be pretty easy, Monitor might be a little tougher though...

is not the internet cable that is going trpough the case, but for the Evga EVbot from IO-Shield till in front plate. ;)

Ahhh that makes much more sense :)

didn't you see the connector in front ?

little square hole (Evbot) under a tiny drilled hole (clear Cmos)

i made the EVbot connector in the front plate, is a little easier i think ?

Yeah, I remember you mentioning it before too. I just did not reread the whole thread just the latest posts :)

just to make it more eassy for me, also the DEBUG LCD in front will be handy, together with the clear cmos, for OC and benching.

normally this is my 24/7 rig, but hey, why not playing on benching with it with the cpu chilled, no ?

:) :) :)

put all kind of low end vga's on it together wiht cpu power for hardware points

Evga SR-2____________________Old gpu

little teaser, what am i planning to do ?

http://i53.tinypic.com/vwtslx.jpg

fire it up already :taunt:

need mem and a 3th pump,

then afterthat i can boot it and install on a velociraptor HDD, but upgrade the vga's and revodriveX2 on time.

how long has this build been going on for ?

thats why i dont like cases to much work to get it to the way you want it :P

but when it's finished, i makes the trouble wourth

untill you wanna upgrade it :laughing:

but it looks very nice alot of work put into it :good:

for a 24/7 rig, this will do i think lol

1/4" fittings? For....

Likely another chilled loop? no?

I was thinking a HDD cooler, but the HDDs are not located anywhere near there are they? (unless thats the only spot left for another pump lol)

it for an extra bottom plate in the case, and under it, will come in the loop :

inline temp sensor,
flow sensor,
pump PMP-400 or PMP-450,
drain valve,
koolanc TMS-200 controller,

and maybe if i have enough place left (height of 4,1cm) i put also a thin fan in there that blows up to the GPU'S.

the bottom is as good as finished,
just need to order a flat pump with top...
if a Koolanc PMP-400 pump with top is maximum 40mm heigh.
I can take the bottom out any time it's a tight fit and is on 2 alu plates, nice and steady.
The usb internal, sata and ECP connector on the mobo is nice clean now.

This is no metal plate but 4mm not shiny black acryl plate PMMA15

only needs to get connectors for the PciE powercables for the GPU's :

http://i52.tinypic.com/2cqmcfd.jpg
http://i55.tinypic.com/1okm55.jpg
http://i52.tinypic.com/znadeg.jpg

Nearly any pump will do with the Boreas...I have seen little effect between pumps with the units. Same goes with the waterblock...stock vs aftermarket.

under the bottom i have a space in height of 40mm, need a pump with a black acryl top on it, that fits under it

after the drain valve needs also a exit for the liquid :
http://i54.tinypic.com/5ewkg2.jpg

Very awesome, incredible, beautiful monster rig you built. Ricks right, I do want one of those Boreas units, but I could never make anything so clean and beautiful, your modding skills are very impressive!! Welcome to OCA :D
MD

THANKS

HAHA freaking nice room. Is that a nurse call string hanging down the middle of the wall, rofl? Dang that is a monsta rig you have there. How much you think it weighs? Probably blow a hemi trying to pick it up, rofl.

my setup that's almost running weights now without :

vga's
liquid
hdd around 32kg

Now you have to redo your room.. because your rig makes everything else look crappy...... lol.......

Looking good..

I have a modified boreas.. I watercool the hotside instead of using the stock fan side.. doesn't make that much of a difference... probably should put a bigger radiator on the hotside.. have a swifttech 240 on it..

the faster the heat can go away from the peltiers the better they cool.

yep.. it works pretty well with water.. seems to hold load better... but its really hard to make an accurate comparison.. I switched it over a long time ago...

Nice hook up on the wall decorations HC

May need to look into your interior designer

Is it easy to keep clean ................. :laughing:


Can you link me up to where these boreas systems are coming from ....

would like to do some research on them but can't find shit on Google ........ :Dizzy: