Holy crap stains that is a sweet looking setup

All it needs is a quick connect 3.5 and 5.25 blanks and your good to go :)

Personally on my setup I use the rad to cool the HDDs, fan controller and PSU. Using it to push air across the board is much better design...

I cant wait to get 360 rad instead of this 480.. it SOOO freaking big

granted it cools like a beast...

maybe I need a new WB, 360 rad and a 355 for my 24/7 setup ;)


Just let witchy build me a solid light weight bench station...

I was thinking 3 rad on a design now its changing ... *sigh

Ill be in touch before you are back to benching WD ;)

Im hoping the block I have doesnt hold back the loop. I got a AquaXtreme MP-05 for $20, that can go from AM2/3, 775, 478, 939, 754, A without taking apart the block to change the bracket. It just looks like a crappy block though.

The Socket A board I have (NF7-V2) has tall caps next to the CPU socket, so I had to put some spacers on the mount for the block to get it to fit. Just looks wierd now lol.
Ill probably have the loop going by this weeked. I got to finsh with the upgrades to my laptop, and go see Iron Man 2 first though :cool3:

Hey C sounds like the rad was not quite dead on balls :ohcrap:

Hoping it is a simple enough fix

Go to hardware store buy a drill bit just a hair bigger than the holes .... prolly 1/16th bigger
drill through all 12 holes and try again ... that should get you so you can pull it tight

You will need a jig saw to fix the notch

take off end panle and the bottom cut extend 1/4" then on both sides of the notch

that should be just about it .... time to preform repair 15 minutes .....

I knew I should of had you ship me that rad ....

sorry for the screw up bro

Its not a problem. Ill probably just leave it as is. I wanted some slack with the tubing anyway for when I stick the rad in a cooler, so having it mounted the other way will give more room for the tubing to loop around.

Pics bro when your 100% done

Keep it clean bro and dump the photo bucket

I like it cause I only have to upload once to one place, then link to it. Im getting lazy :clapping:

Wow, really nice looking rack. Probably be my next step up from a case once I get things rolling along. Quite the Crafter.

Finally got the loop flowing. Was having trouble with the inlet to the rad leaking, but I "think" I got it working now. Going to leak test over night, and hopefully get to benching again tomorrow.

Pics to follow soon.

Here they are.

http://i864.photobucket.com/albums/a...h_IMG_1874.jpg

http://i864.photobucket.com/albums/a...h_IMG_1875.jpg

http://i864.photobucket.com/albums/a...h_IMG_1876.jpg

http://i864.photobucket.com/albums/a...h_IMG_1877.jpg

http://i864.photobucket.com/albums/a...h_IMG_1880.jpg

http://i864.photobucket.com/albums/a...h_IMG_1878.jpg

http://i864.photobucket.com/albums/a...h_IMG_1879.jpg

Looking good C ... :thumbsup:

Need a DD :thumbsup:dual res ... that micro looks micro up there .... LOL