Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Overclockaholics Competitive Benchmark Team (http://www.overclockaholics.com/forums/forumdisplay.php?f=100)
-   -   A Supestember to remember (http://www.overclockaholics.com/forums/showthread.php?t=3273)

Kal-EL 09-18-2010 09:08 PM

Quote:

Originally Posted by Patch (Post 55457)
Might be a long night.

Freezing CPU and GPU.

And NB.

And RAM. :D


Hoping to crack top 50 in 01. Still need to softmod the GPU with all this crap hooked up.......

:Dizzy: Git er dun homie :D

Neuromancer 09-18-2010 09:20 PM

Best wishes patch :)

RomDominance 09-18-2010 09:21 PM

Quote:

Originally Posted by Patch (Post 55457)
Might be a long night.

Freezing CPU and GPU.

And NB.

And RAM. :D


Hoping to crack top 50 in 01. Still need to softmod the GPU with all this crap hooked up.......

Best of luck tonight Patchmaster...make sure to look at Vivi's 01 thread, lots of great info in there.

RomDominance 09-18-2010 09:27 PM

Along another line, Arizona Wildcats #24 just defeated the Iowa Hawkeyes #9 34-27!!!:owned2:

Neuromancer 09-18-2010 11:44 PM

Hope my team does as well in 8 hours 15 minutes :)

Dentlord 09-19-2010 01:05 AM

1 Attachment(s)
Check out what happened when I pulled the pot off one of my 480s...

Fermi topless ;)

http://overclockaholics.com/forums/a...1&d=1284890747

Kal-EL 09-19-2010 01:06 AM

Good, now you can get better contact!

Janks fermi did the same thing too :P

DrNip 09-19-2010 01:14 AM

Was held on by elmers glue?

Patch 09-19-2010 01:47 AM

http://img255.imageshack.us/img255/6609/3d01118k.jpg

Uploaded with ImageShack.us

http://img820.imageshack.us/img820/7958/01rig.jpg

Uploaded with ImageShack.us

http://img844.imageshack.us/img844/4028/01flag.jpg

Uploaded with ImageShack.us

Dentlord 09-19-2010 01:50 AM

WOW!

Great job Patch :o

rickss69 09-19-2010 01:52 AM

Like your funnels - Are they rolled up neoprene sheets or something similar?

Splave 09-19-2010 03:23 AM

rofl, just tryed to bench lightning and couldnt get passed 1050 even just in 2d.............you should have seen the contact lol foam was keeping the pot woops. Thawing and trying again in an hour.

Splave 09-19-2010 04:59 AM

nvm it still sucks a fattie. 1150/1150 was the best it could pull in 06 :( and vantage. that was with +350vgpu and +250vmem -160c

Patch 09-19-2010 06:22 AM

Thx Rick. I cut up a cheap foam hat. Wife looked at me funny when I bought it. Then looked at me more funny when I said it was for overclocking.


Bummer Splave.

FACE 09-19-2010 06:23 AM

Quote:

Originally Posted by Splave (Post 55488)
nvm it still sucks a fattie. 1150/1150 was the best it could pull in 06 :( and vantage. that was with +350vgpu and +250vmem -160c

I take it that opening up pci-e freq doesn't help?

Splave 09-19-2010 06:27 AM

nope, went up to 115 without change broham :)


benched from 5am to noon = 0 boints
lightning failed for 3 hours
then tryed the w3680 in the xpower, chip sucks ass still
now im waiting for shit to air out before I suck at overclock the 655ks

DrNip 09-19-2010 10:52 AM

Ain't nothing worse than having a FAIL session.

Splave 09-19-2010 10:53 AM

Im a perpetual fail machine it seems as of late.

Patch 09-19-2010 11:09 AM

http://hwbot.org/community/submission/1055517_

This set up is officially maxed out. I still suck at this bench - should have better score with these speeds.

But I'm not gonna get one without a couple hundred liters of LN2 and another week straight of tinkering with test order, customized clocks for each test and customized LOD. Not to mention switching to an IDE drive.

PCIE 115 - at 116 I can't save to hard drive, submit online, or even open GPUZ.
NB coldbugs at -25
CPU at -150
GPU full pot without coldbug throughout, but won't take more than 1.62 Gpuv or 2.12v ram.
Freezing the RAM was pointless because my timings and speeds were limited by CPU/mobo. I can run it at C7 2000mhz on the board, but it crucifies my CPU overclock.

ocgmj 09-19-2010 01:13 PM

Nice work Patch. :)

DOM 09-19-2010 08:01 PM

13905 marks with Ati Radeon HD 4870 at 900/1100MHz

just messing with the 4870 on cold air :D

Kal-EL 09-19-2010 09:04 PM

wow, 23 boints just like that!

Splave 09-20-2010 04:22 AM

wow, fuck fermi Im going to blast my 4870!

RomDominance 09-20-2010 04:38 AM

Don't make me sick the MaddMocker on ya!:taunt:

Splave 09-20-2010 05:10 AM

easy mangina ;)

Splave 09-20-2010 04:49 PM

w00t the worst is over, new r3e will be here tomorrow hopefully its a -20 board.

2nd 655k CB is -186c 1.8v with ocz freeze :) board was wet so I had to quit for tonight. Just tested CB.

2x sempron 140s came today for more wprime single core action

Going to try getting the proadlizers on the lightning cold as well...plenty to do this week.

Patch 09-20-2010 08:26 PM

E6300 was the biggest pos ever. OC'd worse on LN2 than a lot of guys were doing on air. Waste of LN2.....

Doing 920 on SS right now. Not bad. Boots and benches 32M at 5.04 ghz, but hitting a hard wall there. Might be temp related. Might be PCIE related as my vrap is getting more difficult. It's not liking more than 112.

I really suck balls at 32M.......

Dentlord 09-21-2010 03:24 AM

Yesterday was horrid, my ram died, and my r3e is crippled.

I got a decent wprime run in before the shit hit the fan, but now I have to wait on new sticks before I can bench more.

I ordered these https://www.superbiiz.com/detail.php...2GB-CL7-Memory

Patch, you think you suck at 32m??? I am 25s behind Splave at 50mhz FASTER speed :laughing:

Splave 09-21-2010 04:08 AM

do you think it has anything to do with brens board being a chl8318 and yours being a chl8318-20? His xeon was epic, still my mind is blow how you guys both spend 1700 on chips :) life is good, hopefully they can meet eachother in your sr2 someday for some epic 3d!

FACE 09-21-2010 04:11 AM

x5677 is epic... thinking about selling my car to get one.. or selling myself to fat chicks (bet they pay more)

Dentlord 09-21-2010 04:12 AM

Quote:

Originally Posted by Splave (Post 55755)
do you think it has anything to do with brens board being a chl8318 and yours being a chl8318-20? His xeon was epic, still my mind is blow how you guys both spend 1700 on chips :) life is good, hopefully they can meet eachother in your sr2 someday for some epic 3d!


That day is coming ;)

2 xeons and 2 lightnings in an sr-2 :thumbsup:

No definite date yet but its in the works :D

Splave 09-21-2010 04:12 AM

^ROFL

AAAAAAAYYYYYEEEE


Joey can I come! lol


2 new in box celeron 347
1 server pull 352

8ghz weekend?

RomDominance 09-21-2010 04:35 AM

Quote:

Originally Posted by Dentlord (Post 55757)
That day is coming ;)

2 xeons and 2 lightnings in an sr-2 :thumbsup:

No definite date yet but its in the works :D

Can't wait, gonna be EPIC SAUCE FTMFW!

Quote:

Originally Posted by Splave (Post 55758)
^ROFL

AAAAAAAYYYYYEEEE


Joey can I come! lol


2 new in box celeron 347
1 server pull 352

8ghz weekend?

Gosh I hope so bro!

I just hope this 655k comin on teh brown truck this mornin is a 7g monsta!

DrNip 09-21-2010 05:30 AM

Quote:

Originally Posted by Dentlord (Post 55757)
That day is coming ;)

2 xeons and 2 lightnings in an sr-2 :thumbsup:

No definite date yet but its in the works :D


Let me know and I'll roll my arse out of the house to come see this in person for sure!

Dentlord 09-21-2010 07:54 AM

I'm gonna bench dammit!


Did the westmere mod on the 762 and pulled the crappy reaper ram from the gamer, xeon abuse continues!

Splave 09-21-2010 08:02 AM

^ YESSSS good luck joey

DrNip 09-21-2010 08:02 AM

:broomstick:

Kal-EL 09-21-2010 06:35 PM

hey, anybody gonna forget September 2010? ;)


:laughing::party::evil:

Splave 09-21-2010 06:55 PM

I plan to forget that shit asap lol but october promises to be quite a spectacular month

ocgmj 09-21-2010 06:59 PM

I plan too leave September in the rear view mirror. Just found out one of my long time friends wife passed away on Monday. :(


All times are GMT -10. The time now is 02:44 PM.


Copyright ©2009 Overclockaholics.com