It's a pour bitch string :)


Wish I had that kind of space to work in

I would probably look at a SS phase system instead.. way better bang for the buck..

2 cpu system is way different.. I would do the boreas to for a 24/7 setup... You can probably get a dual head phase change system though..


Chill, What temps do you plan on running the loops at? what about condensation on the top of those water blocks?

Coolitsystems.com is who makes the system.

Can't find them on their site .......... :Dizzy:

I will chack again

Isnt the Boreas an EOL item?

i got my coolit stuff from france.
But they don't sell it anymore.

i can supply you with Coolit Freezone elite for 240 euro new.
normally they cost around 400euro new.

Why is this stuff so hard to come by???

With this type of preformance you think they would be all over the place ?

Need to find something soon as I want to get this system put together

on my Q3QP i ran 4,65Ghz ht on idle 8°C load 28°C with a Coolit Eliminator and a freezone Elite only 1 cpu cooled.

I hope to keep around those temps or lower.
, now withF reezone elite, freezoneV1 and boreas for 2 cpu's and mobo.

Because they dopn't make them anymore but RMA they still support.
Because before TEC cooling with the hot 65Nm cpu's where not so a HOT item, now with cooler cpu's, better OC, like Sandy bridge and gulftown,
TEC is getting a HOT item again.

If you whant units, i can send them to you if you pay for them offcourse.
I can get 10 Freezone Elites.

Because i'm getting more Freezone Elites for my girlfriends setup that i'm going to build with sandy bridge after few months.

little update :
Make the led's for the full cover block on size to the fan connector on mobo what normally the fan is for the NB cooling.
Next i'm modding the powercables for the vga's :
http://i55.tinypic.com/34jcbk4.jpg
http://i54.tinypic.com/ojqmtj.jpg

Looking good my friend.. was wondering if you were going to do that.. what are you going to do about condensation? on top of the blocks?

Which is the most powerful chiller next to the boreas? and how much?

I might want one..

from best till smallest

Coolit Boreas chiller
Freezone Elite V2
freezone elite
Freezone V1
eliminator

So the boreas is the best of coolit chiller with TEC.

condensation on top of the blocks is no problem, is 18mm thick acryl, works also a little bit isolating, and temp is not so low under ambient to create condensation.
i just run on the boreder of forming condensation.

A thin coat of Dragon Skin on the blocks pretty much takes care of condensation worries. I have not had any problems with mine thus far.

In the SFF case where the mb lies flat I applied some blue painters tape around the perimeter of the chip and then followed that up with a light coat of Dragon Skin just in case. You can do a much neater job than I did...it did not matter in my case as all was buried anyway. (Boreas TEC being used)

http://i434.photobucket.com/albums/q...9/DSC00561.jpg

where you get you're dragon skin from ?

it's a spray paint ?

http://www.overclockaholics.com/foru...ht=Dragon+Skin

thanks, let's see.

i'm busy on a little mod for the memory, lasered alu, and some handwork, need base and color paint :
http://i52.tinypic.com/23mq2yv.jpg
http://i53.tinypic.com/2q0sp4g.jpg

new pic
http://i56.tinypic.com/a1slfp.jpg

Man I'm really starting to not like you chill, that box is the sexiest damn build and I absolutely love it!!!!!!!!!!!!!!!!

You really do have a gifty friend... :)

That looks AWESOME. I can't believe they did not come with that design stock! It looks perfect.

yopu don't like me anymore ?
now you hurt my feelings :muaha:

I would'nt advertise my address or ever leave the house with a rig like that inside...:ohcrap:

i got email today that i will receive 400euro sponsor stuff of watercooling and all kind, to choose from webshop,

will help my rig good.

now only need to find a GTX580 and revodriveX2 240Gb

Congrats Chillerdude :D very noice!

Sick man,

I have been eying up the Revo's ....

An entire new level of computing,

Some are saying booting off them is like turning on a television ,,,,,,,,,,,,,,,, :thumbsup:

Chill,

Going to get my Sr2 up again.. .playing on water and likely going to chill the nb/sb for when I am under LN2.. There really is no need for LN2 on it.. but chilled water should work like a charm.. especially on that damn cpu0 pwm... definitely big problem there.. and should help out quite a bit..

Nice Hybrid, sponsors are awesome!!!!!

Seems like you got a great thing going there Stepz ;)

not that mobo block, the koolance block keeps the CPU0 PWM colder because the block is in one piece, all the other blocks that are in two pieces are that PWM hotter, with that small baby block on it.

on the koolanc block also heat can go tru the metal down.

i just pumped 30 golden cups extra on my profile lol
funny if you see it

http://i55.tinypic.com/2exy848.jpg

lol, I am not that worried about that block.. I wanted the open space since I will be using LN2 on the board alot... also I have been burned too many times with Koolance products, won't do that again. Also with really chilled water condensation will likely build up.. this will reduce my prep.. Also, I am more concerned about the nb... since the voltage will be quite high..

Now i get something, the prize i won with CaseModShwoDown2010 for 1th place,
with my custom TEC on i7 ,
they just redraw the prize money on paypal :


We were recently notified that a payment you received was reversed by the buyer's bank.
As a result, we have reversed the following transaction:Transaction date: 28 Jan. 2011Transaction amount: $75,00 USD
Buyer's email: c.betances@newmodcity.com
Buyer's name: cecilia betances
Your transaction ID: ********************

WTF is this ?
first organize for months a competition, i won in categorie best hardware mod
then i get my prize, and now they pull back the money?

Now i on negative balance pppfffff

what the hell is this for a competition, i'm waiting for an answer why they did this

Sorry to hear that bro... :) I am sure its a mistake..

yes , it was a mistake, they are having problems with there paypal,
they transfered it already back lol.

crazy times these days ;)

Any updates bro?

only this pic for now, a better one,

tomorrow i will receive the stuff of sponsor so i can work again on my rig, and finish up the case and all around.
So in this weekend updates will follow

then i only need some GTX580's, and it's benching time

http://i53.tinypic.com/nzreph.jpg

better pic of GT mod :
http://i53.tinypic.com/nzreph.jpg
and new stuff sponsort by aquatuning :
http://i54.tinypic.com/2pqq068.jpg

So what am I looking at? Whats each for?.... lol... Can't wait to see whats next... this is definitely my crack thread.... need to see whats going on.....

Not sure what i am going to do with myself when its over.....

PciE 8pin + 6pin extention cables for vga mod,

pump, one to build in, the other one is for modding pump project.
liquid ultra and ceramiq paste, modsmart led station, Dual 3mm Red led cables,
drain valve etc....

today had some fun to make some more Dominator GT flames for my memory :
http://i51.tinypic.com/212e0sx.jpg

sick stuff man. You should market that. might not make a mint, but custom tops for DOMs might be popular among the modders crowd :) They do look awesome!

thanks

update :
http://i51.tinypic.com/dqsksz.jpg