|
Over the limit, under arrest!
Under the age, over the knee! lol :P |
Quote:
|
so as i was overclocking that other day somehow i pulled my back really bad i been in bed for 8 days now sux so much!
|
Just rub some tusin on it. :)
|
i should be getting my nf7-s very soon now
what should i watch for when buying from other people from other forums? cuz i am getting it from techpower up and i don't know this guy at all.. |
i just revived my "new" toy... it's new in my house =) Abit NF7-S V2.0
now my Project A is finally completed and i just have to find time to bench the hell outta of it =) i just tested out the baord and everything works... the nb is got a giant heatsink with out fan on it and there is like a mini heatsink on the sb too... but what is that chip has the sticker saying NF7-S? anyone got any ideas? seem like the dude before me bench the shit outta of it cuz i see all that heatsink mark and everything.... but the board was not been used for a few years now from what i can tell at least cuz there is like spider webs on it other than that should be fun to watch i am working on my finals right now but as soon as that's done i monna be benching like there is no tomorrow again lol ---0---CPU------- AMD AD900AMT33 ---1---CPU------- AMD AX1700DMT3C ---2---CPU------- AMD AX1800DMT3C ---3---CPU------- AMD AX1900DMT3C ---4---CPU------- AMD AXDA2600DKV3C ---5---CPU------- AMD AXDA2600DKV3D ---6---CPU------- AMD AXDA3000DKV4D ---7---CPU------- AMD AXDA3000DKV4E ---8---CPU------- AMD AXDC3100KV3E -------RAM------- Corsair CMX512-3200LLPT XMS3205v1.2 [BH-5] -------MOB------- Abit NF7-S V2.0 ($35 Shipped) -------VGA------- PNY FX-5200 PCI |
Make sure you wear a back brace while benching this time :P
OCM :thumbsup: |
Quote:
thanks for reminding me :thumbsup: |
i been practice soldering today when i got out of bed, and i was wondering what should i mod my board with?
what kind of wiring should i use? i have the single hard center wire was left over from me modding my old ps2, and also your everyday wire from a usb cable or things like that... and the 80 line IDE and 40 line IDE cables too what's the best way to go for my commando? i been soldering DDR ram and xbox360 motherboards lol |
and solder too. what kind of solder should i use on the board?
i hav ethe silver bearing solder and the type r? |
just burn the shit outta my self
damn! trying to soldering something really flat |
Quote:
|
Quote:
it looked bad today at work tho.. it was like nasty water white cuz i wash my mands alot at work and i went around and showed people that was kinda fun but i am thinking about really modding the baord like this up comming thr or something so gl on that and gl on the finals too lol 6 classes and i have a 90.54 and a 99 so .... we'll see =) |
mod it
OCM :thumbsup: |
90.54 is weak sauce.
Get that grade up and then get to moddin :) |
lol 90.54 is an A
butta yeah in my school 90.50~100 is 4.0GPA rofl! but yeah you are right i got few more classes need to study for then overclocking NON STOP! |
there are two mods for the commando...vdroop and vcore mod...
for solder i prefer the 63/37 stuff..its got lead..but it melts at lower temps.... most of the solder that is used on boards are the lead free solder...so you'll need a slightly hotter iron.... there are lots of videos out there..i think drnip has a thread on soldering with lots of videos... |
Quote:
i just looked around.. and the closest i can find was 62/36/2 will that be fine? cuz the next thing i have are the 60/40 and Type R MIL-F-14256F what ever that is and i just got my first 970 in the houes! there should be few more.. but i may get turn down idk yet... Core i7 970 B1 Batch code is 3012B113 the heatsink is HUGE! :thumbsup: taking my system down right now gonna bench the hell outta the 920 first tho.. =) |
for i7 920
1. cpuz,,,,,,ht off...slow qpi...pcie 115...lowest ram multi...set to 8-8-8...on stick of ram and yeah dice it :D |
Quote:
installing drivers right now |
one* stick of ram ....
|
will do sir!
i am still testing everything on air right now... btw here is my settings vcore 1.59375 cpu vtt +225 cpu pll 1.980 ioh pll 1.980 qpi pll 1.600 QPI 215 mem @ 2:8 7-8-7-18 69 1T |
pci-e MHZ are at?
|
Quote:
it;s at 110 it's not booting at 115 |
1m
[img]http://hwbot.org/signature.img?iid=492021&thumb=false&iehack=.jpg[img] 32m http://hwbot.org/signature.img?iid=4...se&iehack=.jpg fast http://hwbot.org/signature.img?iid=4...se&iehack=.jpg |
turn off HT you dont need it for 2d besides wprime ;)
also did you put it in slowmode ? |
why is everytime when i run wprime it bsods?
like EVERYTIME! no matter what setting! have not tried stock yet but even with my ultimate 24/7 stable setting it still bsods! and also it shows up as Pentium III Xeon! WTF! |
Moar VTT?
What BSOD are you getting? |
bsod on wprime....its too hot if you're on air...and 1.6v vcore
|
Quote:
Yes, that is a lot. |
Quote:
it's not showing me a code it just bsods and then restarts.... Quote:
i was just wondering.... i'll be benching in about 2hrs.. |
other benches? try vantage with that same settings.
anyways 1.6v on air is torture ...you'll degrade your cpu. |
Quote:
idk why but vantage just will not start i think i fed up the install.... and also the bsod happens right after i start wprime 1024 and code is 0x00009C the temp seems ok not the greatest temp but it's around 70~80c |
dice it alreadyyyy :D
|
Quote:
it's just i been testing too hard lately didn't really have anytime for benching much... butta... i am getting some ln2 tomorrow... :thumbsup: and having some friends coming over benching our asses off in the cold it's gonna be awesome! |
my dear core i7 920 i love you very much and i am sorry i been bad mouthing you all this time...
vcore 1.6500 cpu vtt +300 cpu pll 2.000 ioh pll 2.000 qpi pll 1.600 http://hwbot.org/community/submission/1091908_ http://valid.canardpc.com/cache/screenshot/1541534.png that is 18 boints for me under LN2 |
awesome..but ht should be off for cpuz
how was your wprime? |
it was like BAD!
thing i was running with 6 sec was taking me 24sec idk why |
all 8 threads enabled?
|
Quote:
|
| All times are GMT -10. The time now is 10:43 AM. |
Copyright ©2009 Overclockaholics.com