Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Intel (http://www.overclockaholics.com/forums/forumdisplay.php?f=38)
-   -   Asus WS Revolution - 2600K (http://www.overclockaholics.com/forums/showthread.php?t=4003)

DrNip 01-23-2011 10:24 AM

Quote:

Originally Posted by Neuromancer (Post 68544)
580 is nice :)

4.5 Should be real easy to get. I set mine to 4.475 for a 24/7 OC.

I went in with deliberate max voltages though 1.0v SA, 1.2v IO and 1.3v Vcore.

RAM at 2000 ish 104BCLK * 1866 multiplier.

Nice! Great results too Neuro. :cool3:

rickss69 01-23-2011 05:30 PM

Another OS explosion...I can't believe I got rid of a 980X for this junk.

Btw, Jack Lalanne died today at the age of 96. :bench:

Splave 01-23-2011 07:01 PM

toast some carrot juice in his honor

hey rick you are just increasing multi right now right?

Neuromancer 01-23-2011 07:27 PM

Quote:

Originally Posted by rickss69 (Post 68606)
Another OS explosion...I can't believe I got rid of a 980X for this junk.

Btw, Jack Lalanne died today at the age of 96. :bench:

Yah know its funny, I was just thinking something similar... this SB stuff is based on the same shoddy arch that 980X was.

I mean great arch... but full of failure too for overclockers. How many died here? How many lost cores? I don't recall that on previous Intel chips and just never heard of it on AMD. I killed a Q6600 though and those were tanks :)

My first 920 ran 4.65 its entire life... second ran it and beyond and then became a desktop cruiser.. so hard to say if it was a tank... I could still pull 4.7Ghz when I needed to... so yes?

My first extreme OC boot on SB was 52X... first blue screen I got when pushing BCLK... 51X was new max multi...

(I only just realized it or I would have posted it sooner)

rickss69 01-26-2011 08:52 AM

Every time I get up to 4.8GHz it seems everything gets unstable. Is there a setting that controls video somewhere like pci-e frequency? Somehow I think that is what is holding it up. Once over 4.7GHz during boot up the screen goes haywire...after that I can never get the OS to boot again.

http://i434.photobucket.com/albums/q...olution001.jpg
http://i434.photobucket.com/albums/q...olution002.jpg
http://i434.photobucket.com/albums/q...olution003.jpg

Hondacity 01-26-2011 08:55 AM

bios settings?

rickss69 01-26-2011 09:06 AM

Uploader would not work - had to use Photobucket.

I have tried full auto to full manual on nearly all settings and still come up against this wall. I have not yet flashed the bios...I don't understand why this mb acts the way it does and don't want to flash until I understand the reason. To even try again I will have to re-install a OS. (#6 and counting)

ocgmj 01-26-2011 09:09 AM

Have you tried Load-line calibration at the low setting?

Hondacity 01-26-2011 09:09 AM

try pll 1.75v

and cpu voltage manual instead of offset and set to 1.5v

OC Maximus 01-26-2011 09:10 AM

Smack it with a hammer a few times to loosen up them jiggahurtz :taunt:

j/k

hmmmmmmmmm............

LLC "Ultra High"????

Is there a "Ludricous High" setting?


All times are GMT -10. The time now is 04:51 PM.


Copyright ©2009 Overclockaholics.com