sorry buddy!

I played aq3 with 285 classy this morning.

when I go cold on the card its gold easy :)
http://hwbot.org/community/submission/1067853_

sorry buddy!

I played aq3 with 285 classy this morning.

when I go cold on the card its gold easy :)
http://hwbot.org/community/submission/1067853_

ROFL @ 1500+ ram speed

w00t great job guys :thumbsup: :shock: :D :clapping:

http://overclockaholics.com/forums/a...2&d=1287667456

Blimey. In 3 weeks you've gone up almost 3000 points...
Whereas we have got just over 600. We really need to get our asses into gear :P

you guys need more 8800gtx's and AMD 4 series! ;)

Rainy day so had to stay home. Bummer... :) I put up 100 boints for work today.
http://www.hwbot.org/community/submi...70_15287_marks
http://www.hwbot.org/community/submi...70_24703_marks
http://www.hwbot.org/community/submi...70_69392_marks

is that 4870 or 4850? great work man

4870 broski

Well done guys.
Just got another GTX275 SOC today...Gonna bench the hell out of it :D

Awesome! :) what is better SOC or lightning or about the same

Hope the same...Will soon see.

So that's what happened to my hardware points today......:blink:

Nice benching Duke.

And OCM is ripping it up, too.

Splave, it wouldn't hurt, maybe we should all get Q6600's/i7 920's aswell :P
Kenny I think is the only one to have really worked the 88xx series.
I got me a 4870, but my mos powerful cpu is an e6600 :P

And I think that highlights the key actually
We need more LN2 and 980x's :D

Yeah, I've been dicing my face off. Had a nice 8 hour 3D session yesterday. 875K @ 5GHz and an Asus 5870 @ 1100/1300 on air. Have an ebay ATI 4850 on the way to pair up with the 875K and a cheap unmolested AMD Phenom II x3 720 BE for some 2D action. Plan on moving up a couple more spots in the team rankings this month ;)

Special thanks to Honda, Splave and of corse Kal for feeding my new found addiction :thumbsup:

OCM

woot keep it up OCM :)

been playing with p5e3 deluxe with q6600 trying to max fsb. 450 was quite easy without pushing any volts on air (x7) :) I need a pci post card though I cant stand just waiting to see if the gpu fan is going to spin up and its going to boot.

What kinda volts you need for 450?
It's fsb walls I think that are a problem with the Q6600s,

http://valid.canardpc.com/show_oc.php?id=1443538

515 now :) and not a penny more, hard freezes anything higher. If it passes pifast and wprime at 515 and wont go a notch higher I will call it fsb wall

Nice, it might change when put under cold.
Had that happen to my e5200, got a little more out of it
But even if it's a no go, 515 will get get some bointage!

I sure hope so! e8600 on the way for some 01 ownage :) classified 285 on ln2 is win I hope. Shammy pm'd me some pointers for it ftw

The 285 is a good card for 01, look forward to seeing some results!

With the help of my new Greek friends and chuch I cannot go wrong! :D God I love my team

Speaking of 01, getting better efficiency with recent team recommendations. But I can't bench the E8600 over 5.8 GHz with decent RAM timings. I think I'll blame my REX. Add that to my inability to bench at more than 120 PCIE, and I can't improve my score.

Trying to decide whether to work on it a 3rd night, or start binning Cedar Mills. Have 6 new ones and the P5e3 sitting neglected in the garage right now........might be a better use of the remaining 25L of juice this weekend.

patch vnb?

What did I do this time? :eek: :rofl

Tried a very wide range of voltage and temps, along with a wide range of FSB termination voltage. Also fiddled with offsets extensively (tried auto too). Have a pot on the NB so I haven't been shy.

More than most rigs, this seems to need baby steps. Doesn't like even moderate changes. I have to boot at 5.6-5.7 Ghz, then inch up with setfsb. Even then, I have to bench something between stepups or it freezes. Usually I just do a run of LH, bump up, run LH, bump up, etc. until I get to my target.

01 is a colossal amount of work. I think that's why people like it so much.

:thumbsup:


Why not use tweakit? I loved to use tweakit.

25k sounds good :D

excellent work girls

Celeron 430 = FAIL

That or I needed it on LN2. Highest I achieved was 3.916ghz which didn't get me where I needed to go and forget about running any other 2D benches. Highest I could run w/prime 32 was 3.8ghz. Will try this chip again one day on LN2.

WTF!? Just hooked up my Gigabyte GA-MA790X-UD4P I just purchased off Ebay. It doesn't work. Turns on but does nothing but beep every 2 seconds. No display, no nothing. I can't call it. I quit. This has been the worse year for me and rma's, doa's, broke and or damaged hardware.

EDIT: HAHA, problem fixed. Clearing CMOS didn't do the trick. Had to pull the battery and let it sit, then it fired right up. Still can't call it. Just glad the mobo works because I was about to cut my wrist with it. ROFL!

wow thats sucks stuff like that makes benching not fun

i killed the kimbo 8800gt :( 9600gso, 8800gts 320&640mb

broke a cpu pin and almost killed the 980x and mb with water in the socket

so just take a break go to dents and take all his stuff and send me some :thumbsup:

only good news i got a damn dewar :D

now im broke :P

Dent's on his way out of town. Got two dewars in the garage but no money to fill them until next week. That's why I went with the ghetto DICE job tonight. Nothing but failsauce. Pisses ya off. Especially since I came off some other failsauces the last 2 weeks. Only thing I have to show for this month is some mediocre q6600 benches, a 7.7ghz Intel CPUz and a 6.2ghz or something AMD CPUz. Should of had more. Like 200 point more! Guess I set my sights too high. Maybe November will be better.

cuz you got a cpu for 3d ?

to me cards seem alot easier for boints

but now i got a dewar but still dont have a cpu pot or temp gage XD

and my babys turning 1 wed so what does that mean dad has to spend more money lol i guess its just going to get worst as they get older

You got that right. O' Travis here doesn't have the cash like he use to for hardware! I'm on a 2D kick at the moment. I don't have any GPU's worth mentioning right now.

"i quit"

we don't use that in the army...

foster the fever. even if you're not sick.

dom if you wait..i might hook you up with a pot...

Uh I meant I quit playing around and kicked its arse working now. :D

Wow. New high PCMark05 score for me. :) If this R3F was not such a shit OCer I would have gotten mad boints on 05. As it is at 4.4 GHz I managed to beat my 4.65 PC05 run by over 4K points :)

Going to be nutty when I toss the two SF1200s on the classified and OC the vid card :)

Nice going Neuro. That bench is a mystery I should try to learn someday.


Fortunately, I'm finally getting some efficient runs in 01. :thumbsup:

Tried for the last 3 nights to get my E8600 back to previous clocks, but she was having none of that. :Dizzy: I'm tired.

But even with the CPU clocked 350Mhz slower, I still beat my previous high score by a few marks.

http://img98.imageshack.us/img98/7885/01goodeffic.jpg

Uploaded with ImageShack.us

wow 1gb didn't hurt huh...

nice

Wow man. 3D is something I cant do. Congrats. 120K in 01... I got half that score before :)

lol

Nice job!