i used latest firmware from OCZ , that's 1.33 flashed in ubunti on usb stick,
guide is here : http://www.ocztechnologyforum.com/fo...drive-firmware

Latest firmware is here : http://www.ocztechnology.com/drivers/

And i used the beta driver for windows from silicon image from here :
http://www.siliconimage.com/support/...27&cat=3&os=11

The only thing i need to test if RevodriveX2 whants to boot with win7 installed on it as a boot drive with the silicon image driver, that's the only thing i didn't test yet.

If you feel up to it drop windows 7 sp1 onto a USB 3 stick (I still slipstreamed NEC drivers on mine but I dont think you need to on sp1)

Install from USB3 port. My best time was 6'47" to desktop (including creating the partition and a double boot to change boot order after first install. I bet you can beat that with that drive :)

i tink so to ;)

i'm been a bad boy my wife said,
i bought a F1EE pot and a TEK9 6slim pot for this year lol


http://kingpincooling.com/assets/Upl...tek6-site2.jpg
http://overclocking.fi/graphics/images/gear_f1ee.jpg

Wives, they know nothing! :P

mine knows to much, very smart one for a Roemenian girl here in belgium. :blink:

But she doesn't forbid me to OC and bench, but now she whant's another car gggrrrrrr.

Hahaha :blink:

don't thnk mine even knows I have my fatboy, or, what a fatboy is for that matter :D

My girlfriend knows all that stuff,

even when i speak about some videocards lol.

She also likes to play MW2 on my rig lol

^keeper mw ftw

I think so to, she will assist me when i'm benching, will make some OC-Girl pics hihihihi

I think the word SICK just begins to describe that... :shock:

thanks, 8 months work in it and only need some vga's for it lol, then it's completly ready..

check also other video's on my youtube channel and pics in this buildlog.

I talked with an engineer at Coolit a couple weeks ago - no plans to make any more of the boreas :thumbdown:

already for a while they don't make it anymore,

i found mine somewhere in a shop and they had it lying around under 1cm of dust in the darkest corner of there magazine lol :p

but when i have a budget i will make my own design of a boreas that cools even better and then i sell mine and put my own design on the case instead.

There's a new baby coming to me, a Evga GTX285 Classified 1Gb vga, just for PhysX in my rig :
http://i39.tinypic.com/352m0yg.jpg
http://i43.tinypic.com/xoegq1.jpg
then i will have all Classified stuf in it :
SR-2 Classified mobo
2x GTX580 Classified for FPS
SR-2 1200w Classified Psu
and the gtx285 Classified for PhysX

Nice :thumbsup:

damn nice setup bro!

new pics will come when vga is in the house

I always wanted 4 of those cards, just never got around to grabbing them.

i just found one, they are very rare i notice.

Last stuf making for vga's, making 5 more of these, cut them on lenght, other side also connectors,
isolate them, make them black :
http://i40.tinypic.com/2by62o.jpg
http://i41.tinypic.com/161yusl.jpg

What is that again?

1 of 6 for power for vga's.

Extreem cable management (no cable lol)

dude that looks sick as hell mate!

lol, thanks, hope result be also so good as this looks

the other 2 beasts i have from last year and one did go under Dice already :

http://i56.tinypic.com/28c0hs1.jpg

like this the connectors will be :
http://i43.tinypic.com/wa3x3s.jpg
each vga 2 connectors, but behind each pair there are 3x 12v rails.
So vga's will get enough power
(and made shure the cables are not to tin for that power transfer)
http://i40.tinypic.com/23sdrol.jpg
only those bars need to come at the same hight as the connectors on vga's, so need some curves to get that
(don't mind the dust lol) :
http://i40.tinypic.com/261fbbb.jpg

i so wanna see how this comes out :)

Me to, next week make the first one finish, but need more of these 6pin from vga's , they have thicker contact pin, but hard to find loose, need some dead vga's for that i think :

http://i43.tinypic.com/34i0cis.jpg

Wait..
so there is no cables in there at all?

How does that work?

Scalar Waves...

fixed points of perpetual fission and fusion that emanate from the fabric of morphogenetic fields.

just did some googling that's pretty awesome

they are solid copper bars, no tubes

that's what i was wondering too

think tubes will be not good enough to tranfers the power the gpu need

gtx580 Classified backplates are in the house, the gpu's getting spoiled:
http://i39.tinypic.com/2iqzbmf.jpg
hhhmmm sexy :
http://i44.tinypic.com/w1zn1v.jpg

Nicely done!

only was no TIM with the plates, so i needed to order new 3mm TIM dialectric.