Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   General Discussion (http://www.overclockaholics.com/forums/forumdisplay.php?f=2)
-   -   Rev running at -75 (http://www.overclockaholics.com/forums/showthread.php?t=3980)

Splave 03-03-2011 05:33 AM

example for the 5.6 chip

boots 56x100, doesnt not boot 57x100 (blinking command prompt equals your max multi for the amount of cores you are using) so then you increase bclk till you cant any more so 56x101.1 then in OS it will go up to 56x101.3 etc :)

I like the gd65 revster, just make sure you have some good non-hyper sticks

ReverendMaynard 03-03-2011 05:34 AM

I has some non-hyper GSkill Pi Black 2000's....they alright? If not recommend some please :)

Witchdoctor 03-03-2011 05:45 AM

Quote:

Originally Posted by ReverendMaynard (Post 72433)
I has some non-hyper GSkill Pi Black 2000's....they alright? If not recommend some please :)

I got the 7-10-7 2133 ripjaws for this platform, can not speak to their preformance as they are still awaiting a board ...

I was using 2000 Hypers with no issue with the WS Revolution for the short time I had it

Neuromancer 03-03-2011 01:12 PM

Quote:

Originally Posted by Witchdoctor (Post 72435)
I got the 7-10-7 2133 ripjaws for this platform, can not speak to their preformance as they are still awaiting a board ...

I was using 2000 Hypers with no issue with the WS Revolution for the short time I had it

Probably not equitable to a budget less setup I reviewed the kingston Grey series on SB.

1600 mem at stock 1866 minimum at 5ghz. Best improvement. (same main timings). MOAR is always better though :) just very reduced increases.


All times are GMT -10. The time now is 04:46 AM.


Copyright ©2009 Overclockaholics.com