A little i680 benching on p55 classy
 

Well since my new 980x is dawg, heated the f1 up dried it off and picked up the classy p55 for some late night action :Hi:

This i680 seems to be a winner

http://valid.canardpc.com/cache/banner/1294701.png

Thanks again to elano for a bit of troubleshooting help with p55, hes the mastah :) We figured out why I was getting a laggy mouse which brings me to the cold bug.

CBB -165
CB none
Cold slow occurs if I keep it at -190c for 2 long. If i bring it down quick and say run wprime to heat it back up it will be fine. If not I get laggy mouse and whole system stutters. Seems to like it right at -177 to -183 or so. I think something is freezing around the socket causing this.

Was trying to get a good pi time for the most part, and in between that ran wprime and pifast once just to get some hw bucks for now.

I kept getting not convergent, and not exact in round alot. Also a bunch of 9c BSODs, which is vtt or vcore I always forget.

Anyways, had fun 40L to go and im sure there is a ton more to pull out of this chip. Was a good reintro to the good old p55 classy. Shout out to rom for letting me borrow his evbot saved a ton of ln2 with it for those #16 post codes.

Looks good dude. You think she has more pifast and 1m mhz in her if you spend a little more time with it?

Thats what im thinking :)

ht off please

sorry for the bad results guys I will work harder

maybe some more tonight?

How can you be sorry when you're grinding out results....good, bad, excellent....they're still results brother :)

thanks rev head :)
I guess Im just in global mode still is all. seems lackluster but ahwell

Another interesting thing, I got higher with the x8 mem multi than with x6 :) 226 wont even spi1m at x6


is 9c BSOD vcore?

power related event?

maybe because my AC is on the same power strip as my monitor and PSU ;) ??

perhaps I should try moving it to a different breakers

absolutely. Sorry I was vague, received a call when I was originally putting in an edit.

Just a quick flicker can cause that. I've had it happen during imaging outside the UPS ( I roll like that) and a minor brown out occurs.

If it happens again after you've moved from that breaker start looking at your PSU.