Oh No
 

Classy just bit it hard .... :blink:


won't boot ... lights lit but hit the button and nothing is happening

Any ideas are welcome ........ Can't afford to replace it .............. :ohcrap:

have you tried shorting the pins ?

yea I even thru a switch on it .....

efen dead as a door nail ..... wondering if I have some moister problems ???

Next rip the head of and see if it is wet in there ....... :shock:

Throw the board in the dryer lol

Suckos brudder. Like assasin says, throw it in the dryer or oven for a bit and see if she lives.

Yes! Dryer is the way to find out about the moisture! :thumbsup:

Make sure to use a dryer sheet so it smells nice also..:rofl

try another psu dude.

if its not switching on or nothing is happening at all then it may be the standby voltage...

also what color led's are lighting?? and do they change at all after pressing power?

Blue light is on and the red eVGA light on the NB is lit but hit power and nothing


Ripping it down to see whats up ..... ............. this sucks .....

I wonder if it is this virus of a card I have in the slot .... ?

lemme know if you need any help.... are you the original owner?

Sounds like what happened to my 758 ... not good bro.

Yea I bought it brand new for Digital Storm

they were the only ones who had one in stock ....

does not look bad ... litle moister on the head .. but that is typical as it condenses the moment you take it off ... looks like a good seat as I have had it on for over a month and a half. Going to hit it with the hair dryer a bit and see what happens ...

if shes dead... register it and pm me the SN I will get ya goin to get replaced.

Wow bro much apreciated, but not sure if it is the board yet still working on it.

Hopfully it is sumptin simple. But I will let you know and again thansk bro

Figures though, have a case af beer and three cards ready to go and rip off about 150 boints while jammin the tunes and knocking the heads off a few froths .... sucks man


Instead ripping my rig apart :argh::argh::argh:

Been there, done that. I think its the tunes that jinx it. Gotta get going before you launch the tunes.
At any rate, I'd go thru the normal troubleshooting routines before jumping to conclusions.

agreed double check everything first

yea I know just wanted to relax and have fun tonight and rip up da bot

took all the erasre off and reaplying now ... everything looks dry though ???

no idea .. hope it is just a querk or something ...

maybee it will just boot up and I can salvage the evening ... these things the doc gave me for my ankle have me about half loopy .....

he said it was called Vikodon ..... :clapping:

what ever they are I ain't feelin no pain .... wonder idf I should be workin on this stuff with these things ..............LOL

Normal Troubleshooting being:

1- Check all power cables
2- Check Dimm, GPU, CPU mounts, including Heatsink mounts
3- Check PSU is functioning correctly ( PSU Tester comes in handy)
4- Remove sata cables, peripherals and all but one mem dimm
5- Clear cmos
6- Cycle thru mem dimms, tryin each at least once, clear cmos in between each.
7- Try one dimm in slot closest and then slot furthest from Motherboard, then center slots
8- Remove power from the board, unseat CPU from socket, press power button, clear cmos, replace cpu, single dimm, no gpu, power on.
9- Same as above, but leave no mem sticks in dimms.
10- Same as above, Mem and GPU installed.
11- Still no luck? grab a spare processor from a buddy if available. Last ditch try.
12- Note behaviors and post codes thru-out troubleshooting process.
13- Still not working? Of course not nutterz, this is number 13 in the process and its doesnt mean "Happy Days"

Thansk supes.... working on it ... just about got all the earaser crap back on

should be trying to boot with in a half hour and will follow the tips ...

Maybe if I am lucky it will just work ..... :blink:

You should have just tried to boot on air which would have saved some time in case she is still dead. ;)

Yea I didn't even think of that bro .... daaaaaa

These Vikodins are making me a bit loopy


But word is I am posted !!!!!!!! :thumbsup::thumbsup:

I think I found the problem .... this 9600GT is screwed .... through another card in and all seems to be working well

what a PITA .............. anyway looks as I can prod=ceed as planned

thanks for all the help guys .... Hope it holds on ....

So glad your board isnt toast! Go rip it up

Benching on vicodin has to be tough lol

just put the 512 in and it is a total clock whore

It will be my first dice card and if air is any indecation it may get golds.....:thumbsup:

I will be posting up about 120 boints tommorow morning .....

YES! Board is alive! :thumbsup:

yea it is but unfortunatly this card is not as good as I thought it was :thumbdown:

It was looking great and is crashing all over the place now ..... sucks ....

o well luck of the draw I guess

Doc,

Your problem is you forgot the glass of scotch after taking the 2 vidodin.. will throw off your benchies every time :rofl:

I will have to stop and grab a bottle for next session

What brand is the good stuff ........... ?

How's the Ln2 benching going ..... post um up bro

make sure your shaders arent too high.... sometimes the core can go quite a bit higher than shaders