clarkdale with gulftown efficiency @ sp1m
 

http://hwbot.org/community/submissio...55k_6sec_234ms

can someone explain this? this is just crazy...

One bad mofo. There are several non Gulftown chips within the mix. Looks normal to me unless I am missing something.

must be the fast ram

not normal....in anyway...

look at gautams...rams...970 6-7-6 .....this is @ 6.7ghz..

look at dinos gulftown 6.5ghz run...

aristidis rams are at 1000mhz 7-7-6

and e-killer have 6.7ghz ...

something is good is brewing....i wonder who peter-san is...

Gyrock is Japanese man. They are the OG super pi kings. You can also thank them for finding such tweaks as maxmem and most importantly copy-waza.

yep they're the best....but its weird that their efficiency is gulftown level....which wasn't possible last time i know....

Believe my friend. Wish I was a fly on the wall sometimes. Would have been on his wall.

i think peter-san he mentioned is shammy...i wonder if he's got something to do with the efficiency..

I gave them some tips. Glad to see it helped.

I just wish I could remember what those tips were so I could use em for my own runs......

has anyone looked at there team 8 and lowest is ranked 15 worldwide :Dizzy:

yeah they are blatant hw sharers
http://hwbot.org/community/team/team...2d&teamId=2449

But i dont care whatever, if its not all just one guy that is

i don't think they share 3d wise...

about their cpu...i think they are able to bin...akihabara district is just an stone throw away from intel's factory..

also intel japan i think are supporting them...

about their efficiency...they do share OS....

this topic though is a breakthru...i'll message the gyrock maybe he'll share his story...about this 2core gulftown..

so them all having a 6.6ghz+ superpi is just luck where we have twice the people buying twice the shit and 1 of us has that?

we could talk about the hardware sharing on another thread.... lets stay on topic about the 2core gulftown...

anyways i'l see if i can duplicate this sp1m @ 6ghz....and compare it to some 6ghz gulftwon sp1m result...

it must be bugged or something, he has a higher speed submission that is a lot slower with a different chip

yeah i was thinking if its bugged....coz i know these damn clarkdales can't do gulftown efficiencies....i'll still try 6ghz...its fun lol

bump for crio / kzee / dread

you guys know something about this freak efficiency? its very gulftown like....everybody needs to know :D

heheheh

Looks OK to me... It's all about high QPI Link Frequency in those Clarkdales, not many mobos can hadle high CPU Freq + high QPI Link Freq along with proper ram dividers.

Maxmem is a bit weird though and probably that's his special tweak for this run.
Check Real/Available Memory in his run...

1. 6sec 234ms Gyrock Intel Core i5 655k @6647.8MHz LN2 54.3 Team KATANA
2. 6sec 297ms Hideo Intel Core i5 661 @6795.2MHz LN2 42.7 Team KATANA
3. 6sec 390ms fredyama Intel Core i5 670 @6679.8MHz LN2 34.6 Team KATANA
4. 6sec 391ms CAL930 Intel Core i5 661 @6730MHz LN2 34.4 Team KATANA
5. 6sec 407ms Booooon Intel Core i5 670 @6701.4MHz LN2 33.1 Team KATANA
6. 6sec 422ms futto-kun Intel Core i5 661 @6598.5MHz LN2 32.5 Team KATANA
7. 6sec 422ms DAKARA Intel Core i5 670 @6571.6MHz LN2 32.3 Team KATANA
8. 6sec 422ms OMEGA3 Intel Core i5 661 @6612MHz LN2 32.8 Team KATAN

not sure what the list is for..but gyrocks sp1m is weird..compared to all of those...

Honda, I don't have the experience with 655k, but isn't it more efficient in super pi because of the ability to optimize ram mhz on the 2:10? I know when I was playing with the 670, the difference in time was retarded when I ran 2:10 vs 2:8 at ~same mhz all around. Several seconds.....

all 1156 chips running sub 6.5seconds in the 6.5 - 6.7GHz range...

His might be bugged, it is more efficient than the other guys... but they all do pretty good.

the ram is stupid fast and the guy is japanese put 2 and 2 together bad shit happens
but naw for real tho
7-7-5-20 that's really fast right?
and the chip he was getting 2V+ on it

the rams aren't that tight.....the qpi isn't that high...but you got me going with 2v..maybe that pushes the cpu to clock more efficiently....

QPI don't need to be high for 1m. Well not like 32m high. Go look at other high i5 QPI.

i got my cpu 5ghz qpi....it certainly helps....