Overclockaholics Forums

Overclockaholics Forums (http://www.overclockaholics.com/forums/index.php)
-   Member's Rigs (http://www.overclockaholics.com/forums/forumdisplay.php?f=5)
-   -   Splave's rig/intro (http://www.overclockaholics.com/forums/showthread.php?t=519)

Splave 06-08-2009 06:21 AM

Splave's rig/intro
 
1 Attachment(s)
Whats up overclockaholics?

Im splave from over at clubnboc.com, got an invite from kal-el to check this place out. You all know that to be an enthusiast you have to be a member of at least 20 different tech forums ;) and I prefer the smaller tight knit communities. More personal and you build better relationships imo. Less manufacturers involvement weeds out BS as well. :rolleyes:

Anyways as far as my rig, I have a nice little setup going.
http://www.overclockaholics.com/foru...3&d=1244477624

-evga classy
-lapped i920 d0 (i950 is in the mail as we speak)
-2x xfx 4870x2's, unfortunately the hynix ram variant :argh:
-too much ram
::3x1gb HyperX 2000 elpidas non hyper
::3x2gb OCZ XMP 1866 d9nl
::3x2gb OCZ reaper hpc 1866 d9kpv
-Cooling, simple water gtz, BI GT 3x120, micro-res
And on the weekends, I have a SS that holds -45c on a loaded i7 @ 1.5vcore :D

Hope to be of some use to you all, and im always learning myself.

Kal-EL 06-08-2009 06:36 AM

Welcome to the forum brother! :toast:
Very nice setup :D
Thats basically the setup I have inbound atm. Sweet. What's the dealio with the xfx x2's and hynix ram variant? Supes is out of the ATI loop.

Jeffro64 06-08-2009 06:43 AM

Welcome to the board! Nice rig you got there... I hope to be there soon. :D

ReverendMaynard 06-08-2009 07:03 AM

Quote:

Originally Posted by Kal-EL (Post 3913)
Welcome to the forum brother! :toast:
Very nice setup :D
Thats basically the setup I have inbound atm. Sweet. What's the dealio with the xfx x2's and hynix ram variant? Supes is out of the ATI loop.

The Hynix keeps you from flashing them to the TOP bios for some killer clocks w/ on the fly voltage adjustment.

Nice forum you guys have here, I'll post up my rig after work.

Kal-EL 06-08-2009 07:08 AM

Quote:

Originally Posted by ReverendMaynard (Post 3919)
The Hynix keeps you from flashing them to the TOP bios for some killer clocks w/ on the fly voltage adjustment.

Nice forum you guys have here, I'll post up my rig after work.

Woulda been cherry to have that little snibbit of info before this last order now eh? :argh:


Welcome Rev!

ReverendMaynard 06-08-2009 07:18 AM

Quote:

Originally Posted by Kal-EL (Post 3921)
Woulda been cherry to have that little snibbit of info before this last order now eh? :argh:


Welcome Rev!


Doah...hindsight is always 20/20 as they say :argh:

Thanks for the welcome Kal :)

DrNip 06-08-2009 07:26 AM

Nice lil o' rig you have there. I really need to update my GPU's as I am still holdin on to some 260 vanillas.

ReverendMaynard 06-08-2009 07:30 AM

Quote:

Originally Posted by DrNip (Post 3923)
Nice lil o' rig you have there. I really need to update my GPU's as I am still holdin on to some 260 vanillas.

Noticed we have the same 920 batch...nice arent they!?

I miss my vanilla 260's, real workhorses for the price.

DrNip 06-08-2009 07:32 AM

Yes indeed. Will be even nicer when my Classy arrives tomorrow for it. My 260's are alright but can't be pushed further than my 9800 gt's and 9800 gtx's could. Those puppies could perform.

ReverendMaynard 06-08-2009 07:49 AM

Quote:

Originally Posted by DrNip (Post 3926)
Yes indeed. Will be even nicer when my Classy arrives tomorrow for it. My 260's are alright but can't be pushed further than my 9800 gt's and 9800 gtx's could. Those puppies could perform.

Good times ahead with the Classy. Never had the 9800's but I've been eyeing them up for some cheap bointage.

Jeffro64 06-08-2009 07:57 AM

Can the Classy do SLI and CFX?

Kal-EL 06-08-2009 07:58 AM

Quote:

Originally Posted by Jeffro64 (Post 3934)
Can the Classy do SLI and CFX?

Yessir, it CAN! :trophy:

DrNip 06-08-2009 08:02 AM

FTW!!! Looking at 3 way 4890 fun myself.

Jeffro64 06-08-2009 08:04 AM

SSSSSSSSSSSSSSSweet!!!! I can have fun with all of my GPU's!

Chuchnit 06-08-2009 09:54 AM

Sweet lookin setup Splave!!

ocgmj 06-08-2009 10:18 AM

Nice place you guys got going here. I also will post my pics after work. :)

Kal-EL 06-08-2009 10:21 AM

Quote:

Originally Posted by ocgmj (Post 3943)
Nice place you guys got going here. I also will post my pics after work. :)

Kool, Welcome :D

Splave 06-08-2009 11:04 AM

thanks guys for the very warm welcome! Yeah the classified is a beast, on my second one though. The first one top pci-e slot was the only one that worked.

Hopefully it will like the new i950, most I have been able to get out of the i920 is 5.07mhz

RomDominance 06-08-2009 11:17 AM

That is kind of sad, only 90% overclock....
But this is why you are our leader.

DrNip 06-08-2009 11:19 AM

Quote:

Originally Posted by romdominance (Post 3970)
that is kind of sad, only 90% overclock....
But this is why you are our leader.

rofl.

Jeffro64 06-08-2009 11:21 AM

Quote:

Originally Posted by Splave (Post 3966)
thanks guys for the very warm welcome! Yeah the classified is a beast, on my second one though. The first one top pci-e slot was the only one that worked.

Hopefully it will like the new i950, most I have been able to get out of the i920 is 5.07mhz

I'd be happy with that.... the most i've gotten stable out of my Phenom II 955 is 3.5-3.8, it won't go any farther on air or water. Was that 5.07 on air?

DrNip 06-08-2009 11:22 AM

What mobo you using again jeffro?

Jeffro64 06-08-2009 11:34 AM

ASUS M4A79T Deluxe

Splave 06-09-2009 02:14 AM

Quote:

Originally Posted by Jeffro64 (Post 3972)
I'd be happy with that.... the most i've gotten stable out of my Phenom II 955 is 3.5-3.8, it won't go any farther on air or water. Was that 5.07 on air?

That was on the single stager :) i950 comes today. Dont you love when new hardware shows up ?!@%!@

youngpro 07-12-2009 11:29 PM

nice system, wish my 24/7 system wasnt still sitting on celeron d ;)

Splave 11-30-2010 06:04 PM

bump

(just cause I wish I had those x2's still)

Hondacity 11-30-2010 06:14 PM

i was looking at them ati monsters too LOL

OC Maximus 12-04-2010 06:04 PM

Monster rig you had der!

OCM :thumbsup:

kikicoco1334 12-06-2010 02:41 PM

nice rig of yours lol


All times are GMT -10. The time now is 05:09 PM.


Copyright ©2009 Overclockaholics.com